concrete cut used for sale

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Concrete batching plant Turbine type: Sternanlage (Schrapper) Type: H2 Year of Make: 1993 Mixer: BHS Twin Shaft Compulsory Mixer LEKX2.0 Number of binder silos: 3 pcs. Silo capacity: 2 x 100 t (single chamber), 1 x 100 t (double chamber) Number of augers: 4 pcs. Schrapper Type: Stetter Schrapper SW CRS150 Scraper capacity: 150 cbm/h Cement scale: yes Additive scale: yes Number of admixture tanks: 2 pcs. Control: SIMATIC OP27 RC system: Klärfix SPECIFIC COMMENT - Incl. control and control cabinet - No heating system - Fully functional

Mobile concrete batching plant SUMAB 500: - The basic module is equipped with 2-4 hoppers. - Completely pre-assembled at the factory, which reduces assembly time. - Does not require a special foundation for installing the main unit of the installation (only a solid concrete slab). - Equipped with a sealed cabinet located on the structure and a computer control system. - Includes high-end installation features in a compact size. - The entire assembly (except silos) is transported in one 40-foot container. Basic indicators: - Dosing cycles 0.5 m3. - Turbo concrete mixer FTR 750/500. Equipped with a weighing system for aggregate and concrete. - Equipped with 1-2 units of 2 bunkers with a capacity of 7 m3 each. - Aggregates are dosed using B400 extraction conveyors. - Water dosing device with counter. - Water installation equipped with a 1.1 kW feed pum ...

Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

SIMATIK - Automatic machine for the production of concrete products on a concrete surface (pista). The machine is of Austrian origin, about 30 years old. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 25 A. The weight of the machine without the model is approximately 4 tons. The machine operates via hydraulics and electromagnetic valves. The machine was last generally renovated in 2022. The complete electricity was replaced, so that the machine can now be operated automatically, semi-automatically or manually. It is set via a touch monitor. touch. The program on the screen can be programmed in any language. Some bearings and seals were also replaced, and the structure was also renovated. The machine includes two sets of Knauer vibrators and hydraulic tongs for palletizing or loading products. We also add fo ...

TECHNICAL SPECIFICATIONS Manufacturer: MICROMIX Description: Concrete filling station Version: Semi-mobile Type: 500 Year of Make: 2017 Plate Mixer Batch: 0.5 cbm Hourly output: 15 cbm Drive power mixer: 15 kW Aggregate silos: 2 x 6 cbm Water storage tank: 120 l Binder silo: 27.5 cbm / 35 t cement Unloading conveyor (length/width): 10,000 mm / 800 mm Discharge height unloading conveyor: 4,000 mm Drive power unloading belt: 4 kW SPECIFIC COMMENT - Control module with magnetic stripe card - Automatic scale (calibratable) - Admixture dosing - Dust bag filter with electromagnetic vibrator and dust collection container - Height adjustment of the belt conveyor/unloading belt

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

Mixing plant/fresh concrete, with PEMAT mixer, winterproof with heating Sauter/gas, capacity 45-50 m³/h - Binder: 2x60 t (30x30)t & complete silo technology & cement screws - Aggregates: Bucket elevator via revesier belt in chambers (chimneys new about 3 years ago) Boxes/volume = 5 chambers (40,40,30,70,30)t, incl.: moisture measurement, incl.: mixer feed = weighing container (3000 kg) to the inclined belt (cleats) in mixer - Additives: incl. storage/volume: Second-chamber scale 25/5 kg - incl. spirit level: container scale 300 kg - Mixer : PEMAT - Partial mixer 1.25 m³ with 2 mech. Whirling

ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs

A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible.

A stationary Putzmeister concrete pump in trailer design is available. Motor power: 7.5kW, max. delivery pressure: 40bar, delivery capacity range: 30l-90l/min, max. aggregate size: 8mm, piston stroke: 130mm, piston diameter: 100mm, mixing hopper volume: 170l, feed hopper volume: 200l, filling height: 1300mm. Machine dimensions X/Y/Z: approx. 3650mm/1600mm/1600mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or ...

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Scraper plant Type: SW CRS 150 Year of Make: 1993 Theoretical flow rate: 150 cbm/h Current: 115 A Voltage: 220/380 V Cabin weight: 4,400 kg

Mischturm, Fabr. Liebherr, type Betomat 235 Aggregate silo size 290 m³ / chambers Cement silo: 3 silos (2x60 to + 1 divided with 2 x 30 tons) Forced Action Mixer: BHS Twin Shaft Trough Mixer = Type: DKX 1,67 / refurbished - 1 x Control: BENNINGHOVEN (latest version) Year of construction 89', the system was completely overhauled 5 years ago with control electrical conveyor belt - 1 x Kroll oil heater for winter operation The price of 65,000 euros is intended as a basis for negotiation, as the customer needs the space.

TECHNICAL SPECIFICATIONS Manufacturer: ELBA Description: Radial Scraper Machine Type: Stationary Type: RSA 70D Year of Make: 1996 Boom length: 20 m Connected load: 65 kW Operating voltage 380V Weight: approx. 5,000 kg

Formwork tables/pallets Various formwork tables in different lengths Built in 1995 Very clean condition Location Göttingen Price: Freely loaded p. piece 3,000,-- euros + Added value. I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Plant Details - Plant manufacturer: Stetter - Year of construction: 1980 Main Components - 2 mixers, each 1.5 m3 capacity, model Teka THZ2250A (one fitted with Kniele rotor) - Control system: Simma CMS Control 8 - Scrapper: Elba RSA70, built in 1997 - Auxiliary heater: Certuss Junior 850 - Recycling plant: Klarfix KSW60, built in 1989 - 4 binder silos, each 100 tonnes capacity (2 of which are shared) Find more here - / Contact us at -

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

ID3778 Schwing SP2800 D year/Baujahr 2010 approx. 2510 hours/hours 5 t Trailer-mounted concrete pump, maximum flow rate 112 m³/h, maximum delivery pressure 108 bar Trailer concrete pump, flow rate max. 112 cbm/h, delivery pressure max. 108 bar

ID3779 Putzmeister P715 D year/Baujahr 2015 approx. 1540 hours/hours 1.8 t Concrete pump with diesel engine; the P 715 reliably delivers pumpable materials up to 16 mm in size over long distances; high-pressure pump with a delivery pressure of up to 68 bar and a flow rate of 18 m³/h, including a Morath concrete spraying unit Concrete pump, with diesel engine, the P 715 delivers pumpable media up to 16 mm reliably over long distances, power pump with up to 68 bar delivery pressure and 18 m3/h, incl. concrete spraying unit Morath

ID3780 STS Scheltzke MS2-700 E-A-AUT year/Baujahr 2021 approx. 900 hours/hours Fully automatic mixing station, continuous twin-batch mixing plant, total batch capacity (mixers 1+2): 36 m³/h, total power consumption: approx. 30 kW Fully automatic mixing station, continuous double-batch mixing plant, total batch output (mixer 1+2): 36 cbm/h, total power consumption: approx. 30 KW

with adapter plate, Fabr. LEHNHOFF, Type: SW 25, Net weight: 140 kg

OCEM 1440 ES complete production Year of production 2014

A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.

In stock on 3 pallets, each with different sizes. Auction-ID: A1-46700-76

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

Machine type: Asphalt / bitumen sprayer on trailer Manufacturer: VR (plate marking) Serial number: V1324 Year of manufacture: 2010 Configuration: Trailer mounted, twin axle Engine: HATZ diesel engine Engine type: 1D41C Engine build date: 01/2016 Equipment: - Spray bar / distribution system - Bitumen tank with heating system - Control panel with hour counter (approx. 6591 h visible) - Tow hitch for transport - Electrical control box Remarks: - CE marked - Manufacturer plate present - Suitable for road construction / surface treatment works Auction-ID: A7-45990-14

Description Machine type: Trailer-mounted concrete pump Manufacturer / Brand: CIFA Model / Type: v Year of manufacture: 2003 Country of manufacture: Italy Serial number: 00278 Performance Max. theoretical output: 30 m³/h Max. oil pressure: 220 bar Max. CLS pressure: 70 bar Engine Engine manufacturer: Deutz Engine model: F4L 1011 F Engine power: 38 kW (50.9 HP) Engine speed: 2400 rpm Displacement: 2.732 l Engine serial number: 00798493 Weights Max. weight: 2,470 kg Configuration & Features - Trailer-mounted concrete pump - Integrated hopper with safety grid - Control panel with pressure gauges and switches - Stabilizing support legs - Towable chassis with road wheels Condition / Remarks Used concrete pump in working condition. Normal wear consistent with age and use. Auction-ID: A7-45990-24

Type: Concrete vibrator hoses with poker heads Quantity: 2 pcs Drive type: Flexible shaft / external drive compatible Application: Concrete vibration and compaction Condition: Used condition with visible wear, dirt and corrosion traces Included: Flexible hoses with vibrator heads and couplings as pictured Remarks: Sold as one complete lot on pallet; functionality not verified Auction-ID: A7-45990-84

Vibratory cylinders, internal vibrators for compacting fresh concrete without converter, untested, consisting of: 3 pieces with Ø 60mm and 1 piece with Ø 40mm Item price (total purchase only) SO001316 Auction-ID: A1-46973-202

ID2123 Liebherr Betomat III-570 year 1985-2001 complete concrete mixing plant with 3 mixers (2 x ZE1500 / 2250, 1 x ZE 500/750), Sauer dosing system (year of construction approx. 2005) Complete concrete mixing plant with 3 mixers (2 x ZE1500/2250, 1 x ZE 500/750), Sauer dosing plant (year of construction approx. 2005)

Connection: 230V Auction-ID: A1-47154-113

IBS G60 is a mobile gravimetric concrete mixing plant capable of producing not only cement mixtures, but also cold asphalt, recycled cold asphalt, soil stabilization mixtures and soil remediation mixtures. The machine is equipped with two separate aggregate hoppers (5 m³ each), a cement hopper (3 m³), and a water tank (1000 L). Additionally, it can be fitted with two tanks for different types of admixtures, as well as an optional emulsion tank. This makes the unit completely autonomous and enables concrete production directly on the construction site, providing significant economic advantages and ensuring high-quality concrete production. The machine is easy to operate and requires only one operator. Mix recipes are defined by entering the desired quantities of each component through the control panel. At the end of the production process, the machine prints a report containing the  ...

IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor dischar ...

Core drilling motor with tripods for drilling with diamond bits 1 1/4\" mounting; heavily used; Auction-ID: A7-47086-37

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-47029-360

tested for function. in working condition. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-46902-66

74cc; tank capacity 1100ml; manual; tools; filter and string; Diamond saw 350x12x25.4 max speed 5100rpm; granite and concrete; 4893 Auction-ID: A1-47029-359

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Year of construction 2015 Operating hours: 7747 Straightening and cutting from wire coils Max. Production speed: 160m/min Wire diameter 8 - 20mm 6 wire diameters guided in parallel, Automatic and immediate selection of wire diameter Finished wire rod length: 500mm to 14000mm Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface) Fully automatic wire diameter change Shears for cutting to length 14-metre wire rod outlet and roller conveyor 6 driven reels, suitable for 5 tonne coils Beckhoff controller, network connection, online service

Mixer capacity: 1,500 litres (dry load) Concrete output: 1.0 m³ per batch Mixing drum diameter: 2,500 mm Application: Production of high-quality ready-mixed concrete PAS 1500 feed elevator consisting of: – the elevator frame for attachment to a Pemat mixer, standard inclination 60° – the elevator bucket with a capacity of 1,500 litres (max. 2,400 kg) Included – WÜRSCHUM additive scale – and mixer control unit

Manufacturer: C&F Model No.: 450 Nominal capacity: 450 liters Maximum capacity: 540 liters Mount: Wacker WL34 hook mount Hydraulically driven Hydraulically controlled drain opening Rexroth-Bosch distribution block for control Hydraulic motor with reduction gear Shovel base, cutting edge and side cutting edges made of Hardox 400 (8 mm) Mixer screw rings made of Hardox 500 (12 mm) Mixer shaft made of C45 solid steel Ø 70 mm Permanently lubricated flange bearings Hot-dip galvanized protective grille with cement bag spikes Drain hose with guide rod and quick release Hydraulic lines with protective cover and flat-sealing CLT couplings Electrical kit (switch and junction box) available CE certificate available Operation and maintenance instructions available Curb weight: 470 kg Weight loaded: 1,570 kg Dimensions (L × W × H): 162 × 147 × 78 cm Auction-ID: A1-47155-8004

74cc, 2 stroke, maximum speed 9500 rpm, fuel tank capacity 1100ml, maximum cutting depth 125mm, bore diameter 25.4mm Auction-ID: A1-40890-1052

This 10-piece set with SDS-Plus connection consists of: concrete drills length 110mm (5.5 - 6) concrete drills length 160mm (7 - 8) concrete drill length 210mm (10) concrete drills length 460mm (10 - 16 - 20) point chisel 250mm, cold chisel 20x250mm Auction-ID: A1-40890-1072