complete shop used for sale

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

FOR SALE COMPLETE MAIN ENGINE MAN BRONS 12V 25/30 HAVE A GDY SIR; WE VE COMPLETE BRONS MAN 12V 25/30 ENGINE AT OUR STOCK. THIS ENGINE EQUAL AS SULZER 12 ASV 25/30 ENGINE ENGINES ARE IN VERY GOOD RUNNING CONDATION. WE VE SO MANY NEW GENUINE SPARE PARTS AT OUR STOCK. ENGINES ARE READY TO LOAD ON TRUCK. PLS FIND SPEC OF ENGINES AT BELOW 2400Kw 900 RPM 1984 YOB 20604/1045147 SERIAL NO. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Best regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

TO WHOM IT MAY CONCERN ; WE VE 2 SET COMPLETE MAK 6M 331 AK ENGINES ON STOCK ENGINES ARE IN GOOD RUNNING CONDATION. BOTH ARE READY TO LOAD ON TRUCK PLS FIND ENGINE SPEC AT BELOW.. MAK 6M 331AK POWER 800HP 600RPM YOB 1976 SERIAL NO 33045 / 33046 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Complete injection unit with 40 mm screw Repair required

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Complete line of pastabox: •Formage box •Thermoformage inner bag •Remplissage pasta •Remplissages sauce •Operculage

TO WHOM IT MAY CONCERN; WE'VE 2 PCS COMPLETE WARTSILA 8L 38B ENGINES AT OUR STOCK ENGINES WERE USED AS PROPOLSUION ENGINES AT PAST TENSE PLS FIND ENGINES DETAILS ON BELOW. ENGINES USE HFO DURING RUNN?NG ENGINES CRANK SHAFTS HAS STANDART SIZE CLASS HARD STAMPS ON IT . YEAR OF BUILT 2006 TYPE 8L 38B ROTATION CW & CCW kW 5000 RPM 520 ENGINES NO. PAAE027120 & PAAE027119 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Equipment / Additional information: JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Sell a winding number knife, which is Comes. Winding number measurement Measuring range 1-100 000 Wdg. divided into decades 101; 1110; 11100; 111000 Wdg. Multiplication factor x0.1; x1; x10 Measuring frequency switchable 50/60Hz Measurement uncertainty +/- 0.3%Wdg / 0.1Wdg in the case of windings covering the yoke on an equal scale for part u chamber windings up to +0.6% Display sensitivity for a rash of 1% of the year approx +/-0.1% +/-Wdg.

Sell a used heat exchanger Häwa type ww900S3 2 pieces available Dimensions 46021080mm Weight 4.8kg 400â?¬ per device Häwa Type ww2000 Dimensions 120038090mm (1 piece available) Price per device

Rische & Herfurth foil welding Type Polystar 583HP 1.75A 230v Heating 200W Heating temperature max 197°C Mobile on table Foil hose width 80mm; 150mm; 400mm Dimensions Table 1.2m0.8m1.7m High

Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

Complete Veneer Peeling Line Working Length: 3300 mm

Complete line Minster for EOE lids, diameter 72,8 mm.

TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED COMPLETE ABB SYNPOL D CMA 120 3DDE 300 400 AT OUR STOCK PART NO 5879 PRESENT CARDS LIST ON BELOW CMA 138 CMA 137 CMA 135 CMA 136 CMA 132 CMA 131 POWER SUPPLY IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Complete precision ball screw drive with bearings, stroke 308mm, 25x5/25, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Complete precision ball screw with pillow block and floating bearing, thread diameter 25mm x 5mm ball screw Plummer block Rexroth: R159161720 Plummer block Rexroth: R159111720 Ball screw nut with part holder: R150321085 Total 496 x 110 x 72mm Maximum stroke: 308mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we wi ...

TT MIDI 250ml, 330 ml, 500 ml TT BASE 500ml, 750 ml, 1000 ml. Running hours-31151. We operated by BASE from 2013.03…2018.11 Running hours-27145. We operated by MIDI from 2015.08…2018.11

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Essilor SLE 60 slit lamp: -High quality slit lamp in excellent condition - Manufacturer: Essilor -Type: SLE 060 -Year of manufacture: 1999 Essilor AKE 500 Computer: - High quality keratometer in excellent condition - Manufacturer: Essilor -Type: AKL 001 / AKE 500 Refractive diopter meter: -Focus rangefinder focimeter Essilor LME 60 - Manufacturer: Essilor -Type: LME 60 Essilor diets hand grinder: - Manufacturer: Essilor FHG Heat Gun Frame Heater: - Manufacturer: Essilor -Type: FHG 001 N -Electrical data: 230 V, 51 Hz, 10 A UV tester: - Multifunctional anti-UV tester, matching lenses and for testing banknotes Essilor PD Meter - Manufacturer: Essilor -Digital CRP meter Motorized table -Adjustable height The devices are sold together! All devices are in good condition and can be tested and can be viewed on site.

Groninger vial line including labelling comprising ASVG 100 washing machine, container diameter from 16 up to 95 mm, container height from 33 up to 238 mm, capacity up to 3,000 vials per hour, Siemens SIMATIC S7-300, electrics 3x400V/50Hz, electrical power 3.5 kVA, vial infeed via DTE 1000 rotary infeed table (diamteter 1000 mm) under LF-unit, magazin outfeed under mobile LF-unit (The washed vials were collected in magazines and manually put into a dry heat sterilizer for sterilization. After sterilization the vials were transferred to the vial filler. The dry heat sterilizer is not part of our offer), DFVG 4001 intermittent vial filling & stoppering machine with LF-unit, container diameter from 14 up to 68 mm, container height from 30 up to 140 mm, pre & post gassing, 4 filling stations using rotary piston pumps, in-process control for checking the filling volume, Siemens SIMATIC S7-300 ...

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Sulzer RT FLEX 58T-B Cylinder heads complete 5 pieces available New, never used Other major parts also available In our stock in Istanbul please contact: info@fin-marine

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

Vendemos este control del OP LINK valid for pantógrafos.

Complete line for packing, edging and filling boxes. Detailed description

TO WHOMIT MAY CONCERN ; WE VE NEW UNUSED COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 AT OUR STOCK ADDATIONALY WE VE RECON COMPLETE ROTOR AND SHAFT ABB VTR 304 - P11 COMPRESSOR SIDE AND TURBINE SIDE ARE NEW .. THIS ROTORS ARE FIT FOR BELOW EXHAUST TURBO CHARGER TYPE TYPE ABB VTR 304 P 11 HT 439312 n max 467 n bmax 443 t max 680 t bmax 650 HZTL 428765 P3 EX STOCK. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Packaging line consisting of: 1 4-chamber VA silo with bucket elevator, 1 multi-head scale MESOMA combinat 14S, type MD300/ME400, No. 11.02.-069, year of construction 1996, 1 flow wrapping machine MESOMA MD300, , 1 metal detector CINTEX,1 checkweigher OCS Ec, No. 1002883, year of construction 2005, with conveyor belt and dispenser, No. 11825/11208804, year of construction 2011, 1 packaging machine JP KV400, No. 362/2005, with control panel SIEMENS Simatic panel, 1 labelling and carton closure system COMARME gema 470, No. AZ026245, year of construction 2005 with labeller BLOHME Advanced.01, No. 10388, 1 carton folding machine BEDO VA 985, No. 985.1.52496, year of construction 1997

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Bottling line isobaric PET/glass • Year: 2000 - 2013 • Speed: o PET: 6.000 bph o Glass: 8.000 bph • Blower SIAPI - 2000 • Preform tilter – 2012 • ZECCHETTI air conveyors – 2000 • Depalletizer SYMPAK - 2003 • Filling monoblock BC 42.50.10 – 2000 • Ozonator – 2000 • Caps elevator – 2000 • Deareator and Saturator BC– 2000 • Labeller KOSME cold glue and hot melt for glass – 2000 • Labeller P.E. hot melt for PET - 2003 • Bottle inspector (cap level label) – 2000 • Inkjet VIDEOJET – 2013 • Devider (1 to 2 rows) – 2003 • Shrink wrapper DIMAC – 2000 • Handler TWINPACK – 2000 • Wraparound DIMAC – 2003 • Box conveyors - 2003 • Palletizer KEBER – 2000 • Pallet wrapper – 2000

round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;

We sell four OSAI OS 3 Fast Wire Drivers for all types of machines, one for each slave axis and the master. It is sold separately or together, each one has a price of €3,500

TUBULAR radiator in alluminium that can be used at 30bar. Complete line. We have a full production line for radiators to sell. We want to sell all the line, not a single machine. Inattached also the final product, radiators in alluminium in 3 difefrent measures and different hight.

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Type: WDP-100L185, WNo:0019B016501, Part No: 191050 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Disassembly by buyer Location near Soest, Germany Viewing by arrangement Only complete sale List Machine: Location near Soest, Germany. Viewing is possible by appointment. 1 x Miwe BJ 2012 rack oven (GAS) 1 x Miwe 2010 rack oven (GAS) 6 x trolley 1 x Koma Sunriser RDV 24.24 1 x Koma Sunriser CDSM-A SI Year 2007 1 x Koma Sunriser CDS -Sunra A1 1 x Miwe type GR built in 2009 1 x Miwe Ideal Oven D/5. 1216 T1.1 ZNR BJ. 2009 (GAS) 1 x Coma Monocell 1 Frilado bun line needs to be overhauled 1 x Viessmann cold room 3 x work tables need to be reworked 1 x Glotter Chocolate Grater 1 x Chocolate Dissolving Container 2 x Liebherr refrigerators, one with a defective base 1 x Rego stop machine without boiler with linkage (function could not be tested) 1 x Grease Spray Gun 1 x freezer (gasket would need to be reglued 1 x different baking pans Miscellaneous accessories: ...

HYDRAULIC GEAR PUMP COMPLETE, PART NO: 403072 , R25/16 FL-Z+25/25 DB50 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

EVG Complete mesh welding line - Max. Width mesh - 2.400 mm - Max. Length mesh - 6.000 - Wire diameter range – 4 mm - 12 mm - Max. speed - 70 strokes / min. -Longitudinal wire spacings 100 mm, 150 mm, 200 mm -Cross wire spacings 100 mm, 150 mm, 200 mm -Longitudinal and cross wiress are from piece. -The line is complete and still in working condition served by one man. -Machine can be seen in factory.

combined with Expansion tank. Dimensions lxwxh 658x730x445 mm Contents Filter Cabinet 213 cm3 Flange size 760 x805 Lid and dust filter bags not present. Extraction capacity unknown Fan motor operation unknown.