company used for sale

Letterpress printing machine Bautzner Industriewerk, machine number 4868. Rolling rods, however, the rollers must be re-upholstered. Can be done by us for an extra charge. In good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...

Approx. 100 pcs. gratings 2247 x 995 mm Used goods, very good condition, see pictures Length 2247 mm Width 995 mm Support bar height 20 mm Load bar thickness 6 mm Mesh size 3 x 3 cm Galvanized Negotiation price: € 69,-- net per piece ex stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions  ...

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: B105YC Box profile: 105 x 45 mm Agraffe: 3 hooks Clear width: 2,700 mm load per pair of trusses 2,500 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly  ...

2 x 3.6MW 60Hz MAN 18V28/32H Power Plant for sale At a time when the world is suffering from a shortage of power generation capacity, we are very pleased to inform you that we have a nice 7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil /  ...

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

RUIAN QUEENSENSE MACHINE DHB-500 film glove production line manufactured in 2020 by Chinese company RUIAN QUEENSENSE MACHINE CO.LTD. is used to produce double-layer foil gloves. The produced gloves, used for example in grocery shops or in production, guarantee effective protection against viruses and bacteria. The QUEENSENSE DHB-500 automatic disposable gloves production line consists of two identical machines, both of which feature a central drive to control all glove-forming mechanisms. The dual unwinding station is equipped with a clutch, which allows infinite adjustment of the film tension and dual inverters for unwinding control. High-precision feeding of HDPE or LDPE material to the sealing position and the final product sorting point is ensured by the installed servo drives controlling the entire process. After changing the heat sealing dies, the RUIAN QUEENSENSE MACHINE DHB ...

Impact machine stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Impact machine stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

We offer 178 pieces Meva Mammut Schalschlösser a. 14,00€/ piece + VAT. The locks are in a Doka reusable container 120 x 80. The locks are controlled and sorted and fully operational. If you have any questions about 0176, Mr. Becker 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

Impact machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner Visit our large stock of agitators!

Manufacturer: Pago - Condition: used- Type: System 270i - Description: Used used labeling system of the company Pago System 270i Year of construction of the system is 2007, with installed label head Pagomat 6/2 A. The system was stored in a functional manner and stored dry. Technical data see type plates, all information without guarantee and subject to technical changes as well as typesetting errors. Sale under exclusion of guarantee and warranty to entrepreneurs within the meaning of §14 BGB or warranty to dealers or traders. The removal must be organized by the buyer. - Dimensions W/H/D: - Weight: approx. Kg

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner Large selection of impact machines!

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...

We offer a position Peri Trio 330, 117,216m² The formwork is in mint condition, checked and sorted. The formwork skin is as good as new, or new, covered with Peri FinPly formwork skin. SB2/3 possible without any problems! Ready for immediate use! 2 elements TR /4 330 x 120, gebr. Plate 4 elements TR /4 330 x 120, new plate 1 elements TR /4 330 x 90, gebr. Plate 1 elements TR /4 330 x 90, new plate 10 elements TR /4 330 x 72, new plate 14 multi-purpose element TRM/4 330 x 72, new plate 11 elements TR /4 330 x 60, new plate 6 Peeling element TR/4 330 x 24, new plate 2 corner TE/4 330, new plate Net price: 39.620,60 € Subject to sale For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/  ...

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...

Used KLAUKE HK 12/2 EL / HK 25/2 EL Hydraulic pump press pliers Connection 400V 16A Press pliers Klauke PK 120 Pressing range up to 400mm² C-head with 42mm opening width For Series 13 Press Inserts Without pressing insert Good condition. Fully functional See pictures Original price complete approx. 7000.-Euro gross Viewing and pick-up possible Shipping Germany (without islands) 119,00 Euro including 19% VAT The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 The price includes 19% VAT. You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...

Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.

Cone / V-mixer VRIECO mixer from the company HOSOKAWA MICRON B.V. Mixer Type: S 20 VV-1 Machine number: 59619 Year of construction: 1979 incl. manual with circuit diagrams VRIECO-NAUTA Mixer HOSOKAWA MICRON B.V. Mixer Type: 25 LFC-43 Machine NO.: 3000142 Year of construction: 1994 incl. manual with circuit diagrams Size: approx. 2m x 2m x 6m The technical data can be found in the type plate. The offer includes only the parts shown in the photos. If you have any questions, inquiries or the like, please send us an e-mail.

5.5MW 60Hz KAWASAKI PUC60 ECOPLUS Gas Turbine Power Plant This is an eco-plus gas turbine power plant that has been being operated successfully for over 160,000 hours since it was manufactured in 2002 and installed. This plant has been regularly inspected and very well maintained according to the maintenance manual by the operating company. Now, the plant is scheduled to go for sale after stopping its commercial operation around June 2023. Main specification: - Gas Turbine Model: KAWASAKI PUC60 ECOPLUS - Maker: KAWASAKI - Power Output: 5,570kW - Frequency & Voltage: 60Hz & 3300V - Year of production: 2002 - Running Hours: 163,858 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set

800 St. Jungheinrich MPB beam 2.7 m Used goods, good condition, see pictures Jungheinrich MPB Carrier Length 2.7 m 2800 kg load/compartment with evenly distributed load Negotiation price: € 25,-- net per pc ex stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick-witted! We also clear and dispose of or dispose of liquidators. Write us with s ...

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Lord: Simon Blank Technical data and further information: Shelving system: Jung Heinrich Type: G Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 8,830 mm Number of fields per row of shelves: 04 pcs á 2,145 mm Number of levels plus floor level: 04 pcs. Included in delivery are: 05x wide-span rack stand, used Material color: blue Stand type: M515 Stand profilem.: P 50 x 50 x 1,50 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,350 mm high 1,000 mm deep 32x wide-span rack trusses, used Material color: yellow Z-profile: 50 x 30 mm clear width: 2,145 mm load per pair of trusses 500 kg at the same. distributed load 64x safety pins, used Version: completel ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

- Payload: 6000 kg - For standard skips 4 - 7 m3 (see photo) - Motor: electric 400V 50Hz - For lifting and moving skips within the company site. (1 person, walk speed)

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

Main spindle drive, 2AD160C-B35OB1-BS03-A2N1, R911243562, Rexroth, overhauled-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 37,7 - 55,5 KW - 380V / 3 in. - 1500 - 6000 rpm - 240 Nm - 93,5 A - 280kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table-size: 1100 x 300 mm spindle turning speed range: 31,5 - 1400 U/min feed - longitudinal/cross: 12,5 - 630 mm/min rapid traverse longitudinal and cross: 2500 m/min feed range - vertical: 1250 mm/min spindle taper:: SK 40 total power requirement: 7 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,6 x 1,8 x 1,8 m The machine comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used Bertolaso gravity filler "Athena" with 40 filling valves and an 8-digit sealer "Sigma 2010/8 - SX" with cap feed and pneumatic closure conveyor is offered. The machine ran actively in our company from 2012 to 2016 and was then dismantled for the construction of another line. Songs did not come to the construction of the line, so that the machine is fully dismantled in stock. A visit can be done by appointment. The dimensions of the filler are: 2960 mm x 2830 mm x height 3250 mm The machine is "packed" on 3 main items: 1. Filler: 1900 x 1900 x 2960 approx. 3200kg 2. Substructure: 2550 x 1450 x 2710 approx. 2200kg 3. Fairing and various accessories distributed over several pallets: 5000 x 2250 x 1750 approx. 2400kg The filler is designed for bottling still fruit juice at 85°C. Electrical connection: 25KW 400V/3Ph./50Hz Compressed air: 6 bar 600NL/min Water: 3 bar  ...

Synchronous motor, MSK101D-0200-NN-S2-AG0-RNNN, R911316678, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 40kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...

working hours machine: 59,000 h (stand 11-21) working hours laser: 20,000 h (stand 11-21) working range X x Y x Z: 3048 x 1524 x 170 mm laser laser type: Raycus Fiber RFL-C 3000 S (single module) laser capacity CW: 3000 Watt laser range capacity: 300 - 3000 Watt cutting head: Raytools with auto-focus Machine CNC-control: CNC Bystronic Byvision cooling unit: S&A CWFL-3000 ANS dust extraction: Donaldson Torit DCE – DFPRO 6 electrian capacity total: approx. 37 KW machine + 5 KW dust extraction space needs approx.: 12,900 x 4,000 x 2,350 mm total weight approx.: approx. 13,000 KG cutable materials and thicknesses mild steel ( EN 10027-1 S 235JR+AR or rec. Raex quality) 25 mm inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm aluminum (e.B. 3.3535 AlMg3 ) 12 mm brass 10 mm machine description standard options: • cutting machine with operator safety advice ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 20 - 2000 U/min table-size: 950 x 450 mm total power requirement: 2,8 kW weight of the machine ca.: 1,65 t dimensions of the machine ca.: 1,48x1,15x1,78 m The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. Accesories: Ball screws for X, Y and Z axes Vertical milling head with drawbar fixed box table 950 x 450 mm Coolant system complete with pump and fittings Protective bellows on the vertical stand guide, with stainless steel slat cover Bellows for transverse spindle Counterholder block for horizontal milling Pull-in rod for horizontal milling spindle, built-in, with side actuation Control panel with emergency stop switch, swivelling Drawbar M 16, for DIN tools Central lubrication with interv ...

Synchronous motor, MSK101D-0200-NN-M2-AG2-RNNN, R911323308, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 44kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...

Synchronous motor, MSK100B-0400-NN-S1-AG2-NNNN, R911323648, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor, permanent magnet motor, - max. 600V / 3 pol. - max. 3400 rpm - max. 75Nm - max. 33,3 A, - 44kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Key data: 1500 , 400

2 x JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: Generator 1: 57,000. Generator 2: 54,000 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Well maintained by Jenbacher certified maintenance company. In need of service. Available for Sale Now. Price: Generator 1: €100,000 Generator 2: €105,000

Variable area flow meter for heat transfer oil, H250/RR/M40/HAT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C Function guarantee! For sec ...

Synchronous motor, Simotics S, 1FK7085-4CF71-1CH1, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor - max. 3000 - 6000 rpm - max. 22 Nm - 26 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Synchronous motor Simotics S, 1FT6086-8CA71-4AA0, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - 26 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

turning diameter over bed: 440 mm turning diameter over slide rest: 250 mm turning length: 1000 mm spindle bore: 62 mm spindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mm metrical thread cutting: 0,5 - 112 mm/U thread - inch: 1/4 - 56 inch. total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,6 x 1,1 x 1,50 m Qick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425 The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Test force: 250 kg checking height: 0-270 mm kind of tests:: Rockwell workpiece depth: 160 mm weight of the machine ca.: 88 kg dimensions of the machine ca.: 200 x 500 x 800 mm This hardness tester Frank 532 comes from a training company and has been maintained more than second hand. The general condition is according to the age, very good, all functions have been checked. - Table with manual adjustment - with precision dial indicator for direct reading The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.