cnc punch used for sale

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

This Pullmax 4000 Punching machine was manufactured in the year 2001 in Sweden. The machine goes with a wide range of tools and computer software. The machine at the moment is not under power. Contact us anytime for further questions.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit.

Good working conditions

Type: Turret punching machine Finn Power Model: C5 YOM: 2007 Capacity: 30 Ton Maximum Sheet Thickness: 8 mm Maximum Sheet Size: 2530x1270 mm Minimum Sheet Size: 300x100 mm Maximum Sheet Weight: 200 kg Number of Stations: 20 Turret Speed: 24 RPM The machine is still working. You can do an inspection. On request, I will send additional information and photos.

Salvagnini S4.40 punching machine with shear system  CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity  Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²:  ...

Force 1 -54 kN Stroke 0 – 220 mm Capacity range M3 – M6

offer 20366 Specifications: - Printing capacity 100 t - Stroke infinitely adjustable 10 - 100 mm - stroke rate 34 - 80 1/min - Projection 510 mm - Installation height 500 mm - Drive 380 V / 15 kW - punches e.g. up to 31 mm Ø in steel 25 mm - with special punching caliper e.g. up to 58 mm Ø in steel 13 mm - e.g. up to 90 mm Ø in steel 8.5 mm - Space requirement approx. W 1200 x H 2550 x D 2100 mm - Weight approx. 3700 kg - No tools or punching saddles available

sheet width:400 mm plate length:500 mm plate thickness:4 mm total power requirement:0,5 kW Punching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

MUBEA BFL 350 - Profile steel shears technical data see pictures Dimension: LxWxH 1.1x0.7x1.8 meters Coizilgunw Weight 1100Kg

air pressure:8 bar Air consumption:NI 18 l/min. weight:110 kg dimensions of the machine ca.:700 x 300 x 1000 mm

Unloading: 310mm

Full complete line SACMI for plastic caps.

: neu : ca. 4 Wochen ab Auftragse : Polen : 7710 € : 161.14 € : 35 to : 60 mm : 27 mm : 25x18 mm : 5 s : 13 mm : 700 bar : 379 mm : 148 mm : 335 mm : 20 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Please note: weighs approximately 3500kg, no suitable forklift truck present, buyer must take care of suitable housing himself.

: neu : 2023 : 9681 : prompt, Zwischenverkauf v : Polen : 7810 € : 161.14 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 35 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,- 1 Set punch and dieDm. 16 mm € 68,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

equipped with pneumatic clamping; 1 ELCO EM 14 control box

• Machine number: 4221875989007 • Punching force max: 800kN • Material thickness max: 25 mm • Punching device max: Ø 90 mm • Accessories according to photos (sold separately on request)

Working hours machine: 46115 h Max. punching force: 180 kN Working range punching: 2500 x 1250 mm mm Control: Bosch MTX CMP 70 Max. sheet thickness: 6,4 mm Length: 6500 mm Width: 6000 mm Height: 2252 mm Machine weight: 9800 kg Electrical connected load: 18 kVA

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface

Manufacturer: Geka Type: PUMA 165/E-750 Stock number: 0983 Year of construction: 1999 Maximum working pressure: 1650 kN (165t) Maximum capacity: Ø 40x30mm - Ø 34x34mm - □ 28x28mm Jaw depth: 750 mm Motor power: 15 kW Dimensions (LxWxH): 2300 x 1300 x 2250 mm Machine weight: 6.3 t

Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.

Max. punching diameter: 30mm, max. punching force: 500kN, throat depth: 610mm, stroke: 0-60mm, weight: 1.69t.

Including accessories and documentation.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

With dual stroke, max. punching force: 40t, stroke: 30-60mm.

Max. punching force: 40t, stroke: 10-50mm, the automatic lubrication needs overhauling.

Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.

Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.

Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years

Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation.

Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible.

Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible.

Max. punching force: 240kN, working area: 1250-2500x550-1100mm, weight: 3.5t, available die diameter round: 3.1/ 4.1/ 4.2/ 5.2/ 6.5/ 8.2/ 10/ 11/ 12/ 13/ 16/ 17mm, longitudinal: 9x16/ 9x20mm, with documentation, an inspection is possible.

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

Punching force: 6t, ram stroke: 16mm, flywheel rotational speed: 325-720/min.

Model: Super 210 - 20 (electro mechanical) with electric backgauge with feed-in table with large selection of tools Punching cap: 100 ton Dia x sheet thickness: 30 xnbsp; 25 mm / 90 x 8 mm Max cutting-thickness in plate: 250 x 20 mm Blade length: 300 mm 90°-cut corner: 160 x 100 x 15 mm 45°-cut corner: 150 x 100 x 14 mm Cut to length round: 55 mm Cut to length square: 50 mm Max material thickness by notching: 16 mm Length: 2250 mm Depth: 1210 mm Height: 2420 mm Weight: 4250 kg