cnc drilling used for sale

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 275 rpm up to: 3600 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1100 mm Width: 600 mm Height: 2100 mm Various accessories: Preparation for coolant device Lamp Quick change device Digital readout number of axis:: 2 Motorized table adjustment

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Fitting drilling and press-in machine Blum Minipress MSP with attacks L x W x H: 1000 x 800 x 1700 mm Weight approx. 50 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 /1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number of ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: stepless from: 0.02 mm/r up to: 0.25 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Threading device Preparation for coolant device Lamp Quick change device Adjustable depth stop Digital readout number o ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Clamping surface: Length: 580 mm Width: 280 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Taper in spindle: MT: 3 Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 40 rpm up to: 3600 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.0 / 1.5 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 900 mm Width: 1000 mm Height: 1800 mm Various accessories: Preparation for coolant device Lamp Quick change device: A-30 Adjustable depth stop Digital readout number of axis:: 2 Motorized table adjustment

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Thread cutting device up to M 36 - Feeds infinitely adjustable 30 - 1,650 mm/min - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely 30 - 2400 rpm - Extension 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg

Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - Drilling spindle stroke 120 mm - Drilling spindle speeds infinitely 80 - 1400 rpm - Extension 260 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3-12 mm - Lighting

Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...

Hardly used fine drill,220V, 130-630rpm, 720W, up to 32mm

TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools

NEW column boring machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via central knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting power (depending on the slope): M16x1 - Spindle: MK III - Drilling depth (mm): 115 - Extension (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack - Spindle speeds infinitely variable (1/min): 20 - 2000 - Dimensions (mm): 430 x 715 x 1800 3-year warranty for single-shift operation Further TECHNICAL DATA can be found in the product sheet! DELIVERY: free house incl. packaging NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR AN OFFER! FLOTT STUE ...

Very good deep hole drilling machine TBT T10-500. with cooler Drilling area: Drilling diameter 2-10 mm Max. drilling depth 500 mm Drilling method ELB Infinitely variable speed up to 8000 rpm Tailstock with counter rotation Automatic filter for coolant system Magnetic chip conveyor Full enclosure of the machine.

- mounting table: 300 x 400 mm - quill ram: 120 mm - speed range: 5800 rpm - gearbox stages: 2 - feed: 0,001 - 3,5 m/min - rapid: 3,5 m/min - taper fixture: MK 3 - thread cutting device with foot switch - coolant system - total power: 1,5 kW - weight of machine: 380 kg - space requirement (W x D x H): 0,66 x 0,44 x 1,95 m - condition: very good Details High-performance drilling machine, machine number 511 accessories documentation, coolant equipment

High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm

4 adjustable spindles, pedal operation, drilling range 3-14mm, ...

6 adjustable spindles, pedal operation, drilling range 3-14mm, ...

Equipment / other information: 11xdrills & trolley

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 151 Technical data Number of axis total: 3 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 25 rpm up to: 8000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 10H8 mm Number of T-channels: 4 Height of table above floor: 1160 mm Min. distance from table to spindle: 0-110-560 mm Max. distance from table to spindle: 560 mm Longitudinal travel: 420 mm Transversal travel: 230 mm Vertical travel: 450 mm Feeds: 1 - 8000 mm/min Rapid traverse:: 8 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Power: 5.8 kW Total power required: 15 kVA Machi ...

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 4 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 50 rpm up to: 9000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 12H8 mm Height of table above floor: 1080 mm Min. distance from table to spindle: 0-110-560 mm Longitudinal travel: 420 mm Transversal travel: 240 mm Vertical travel: 450 mm Feeds: 1-7200 mm/min Rapid traverse:: 7.2 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Spindle power: 5 kW Total power required: 10 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: ...

TECHNICAL DATA: Boring spindles: 39 Interaxis between spindles mm: 32 Pneumatic clamping: 4 Total connection KW: 4,6

Description Universal CNC deep hole drilling machine from Degen suitable for tooling, fixture construction, training as well as mold making Travel 750x700x600mm Control SIMATIC OP17 Technical data Universal deep hole drilling machine DEGEN UTB 600 E X,Y manual Z, NC control Axes with digital display Drilling depth max. 900 mm max. drilling diameter 25 mm Spindle holder MK2 Spindle drive 2.6 kW Spindle speed max. 3000 rpm Table adjustment lengthways 750 mm Table adjustment Cross 700 mm Drilling unit vertical 300 mm Drilling swivel +/-20° Table area 650 x 1100 mm Table swivelling by 360° Table load max. 2000 kg 2 separate cooling systems - Spray mist (single-lip deep drills) - Drilling emulsion (spiral drilling) With accessory package and glass protection

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Radial drilling machine #5292 Power:16 kW Drilling Capacity: 100 mm Arm Length: 2100 mm Arm Travel: 1500 mm Weight: 13 t

Control: HEIDENHAIN TNC 125 Technical data Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Spindle speeds :stepless from: 45 rpm up to: 4000 rpm Spindle stroke: 120 mm Table length: 590 mm Table width: 320 mm Min. distance from table to spindle: 110 mm Max. distance from table to spindle: 570 mm Longitudinal travel: 500 mm Transversal travel: 300 mm Feeds: 0.02-0.6 mm/min Voltage 50 Hz 3x: 380 Volt Power: 5.0 kW Machine´s weight about: 1550 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Coolant system Quick change device Tool holder deposit Turret stopping device

Tool holder: MK 2 Drilling capacity: 18 mm Speed range, infinitely variable: 200 - 3600 rpm Spindle stroke: 95 mm Table size: 310 x 220 mm Outreach: 215 mm Column diameter: 75 mm Engine power: 0.55 / 1.1 kW Connection: 380 V / 16 A Weight: 95 kg Dimensions LxWxH, approx.: 700 x 450 x 880 mm Facilities: - Stepless speed adjustment - Drilling depth stop - Speed display - Drilling chuck Albrecht 3-16 mm Note: The column sinks into the table.

Technical data Number of drill spindles: 3 Max. drill depth: 400 mm Drill capacity in steel: from diameter: 2 mm up to diameter: 10 mm Bore capacity in steel: up to diameter: 18 mm Bore capacity in cast-iron: up to diameter: 20 mm Centre height: 180 mm Spindle stroke: 700 mm Max. clamping length: 700 mm Table length: 1280 mm Table width: 420 mm Spindle speeds: number (steps): 3 from: 700 rpm up to: 6400 rpm Drill spindle feeds: from: 15 mm/min up to: 500 mm/min Rapid traverse:: 3 mm/min Voltage 50 Hz 3x: 420 Volt Power: 4 kW Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3450 mm Width: 900 mm Height: 1500 mm Various accessories: Coolant system

Control: HEIDENHAIN TNC 360 Operating hours: 14112 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 20 Spindle stroke: 210 mm Taper in spindle: Fehlmann SF 32 Spindle speeds :stepless from: 50 rpm up to: 7100 rpm Table length: 1570 mm Table width: 500 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 720 mm Longitudinal travel: 850 mm Transversal travel: 435 mm Vertical travel: 590 mm Feeds: X,Y 1 - 8000 mm/min Table load max.: 250 kg Voltage 50 Hz 3x: 380 Volt Power: 5 kW Machine´s weight about: 3000 kg Overall dimensions machine: Length: 3100 mm Width: 2200 mm Height: 2500 mm Various accessories: Dividing attachment 4th axis Coolant system Quick change device Tool holder deposit Lamp Set of toolholders Handwheel electroinic

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price

Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke onestellar; Max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; optional with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.

Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused

double head paper drilling amchine

- Drilling capacity into full steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Pinolene stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle - table 300 / 700 mm - Drilling radius min. / max. 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx.B 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. Columns + boom clamping - Coolant device

Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm

specifications Number of drills: 23 Drilling distance mm: 32 Maximum drilling depth mm: 55 Dimensions of the work table mm: 960x3000 Power KW: 1.5 Weight kg: 320 02 Attacks with stop profile

Boring diameter capacity: 100 mm Drilling radius: 3000 mm Work-piece height range: 440-2100 mm Spindle taper: MT 6 Spindle turning speed range: 18-1800 rpm Quill stroke: 400 mm Surface area: 3160x1500 mm Boring feed range: 0,0375 - 2 mmm/min Distance spindle - column: -Min.: 400 mm -Max.: 2850 mm Total power requirement: 13 kW Machinery dimensions: 4390x1550x4130 mm Machinery weight: 13200 kg

GE 1085 HP (809 kW) High-Torque, series wound, DC drilling motor Horizontal, drip-proof fully guarded, blower ventilated

X travel: 6300 mm vertical travel Z: 1700 mm transversal travel RAM Y: 1000 mm Ortogonal head, 2 spindles Automatic head rotation 1°/1° with hirt spindle taper ISO 50 CNC Heidenhain Machine in good working conditions

specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...