cm machine used for sale

Fully automatic 4 line stick pack packaging machine for liquids from Turpack. - In very good condition, hasnt been used a lot Dont sell in Bulgaria. Filling weight range Up to 60 cc- seller products were 5, 10 and 15 ml. Stick width- 30 mm - Fixed Stick Length (55 – 165 ) mm width of the foil roll - 280mm. Viscosity- The seller has produced a variety of products from water-like to thick as honey. From liquids like- water to gels like- mayonnaise. depending on the product, the machine reaches 100-120 sticks per minute The machine has two types of dosing, Dosing needles and electromagnetic valves The seller worked with PET12/AL08/PE45-50 – 280mm Currently dismantled in a warehouse

Baader 200 Filleting machine for salmon species Machine for producing fillet of salmon, trout and the same fish species. It processes gutted and headed fish with or without collar bone. The fish is feed through the tools in such manner that the fillets does not get any stress - it is a prerequisite for a smooth surface of the cut. The salmon version produces both fillets with and without collar bone, and after adaptation, salmon sides on which the rib bones are retained. Capacity: 15-35 fish/min Working range: from 1,5 to 5,5 kg (gutted and headed fish) Power consumption: 5 kW Water consumption: 9 l/min Dimensions: 4,30 x 1,75 x 1,50 m Weight (net/gross): 1800/2230 kg

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Condition: Good, working The Baader 51 skin-removal machine is designed to remove skins from the fillets of cod fish, heke, paltsus and red fish. The machine captures the skin from the tip of the tail without any incision. This provides a higher output of finished products. The width of the pipeline: 380 mm. The fillets are placed on a conveyor belt next to each other. Performance: 50-160 fillets per minute (depending on fillet size and operator skills) Power consumption: 1.5 kW Water consumption: 15 litres per minute The width of the work pipeline: 380 mm Dimensions: 1980 x 780 x 1130 mm Weight (net): 530 kg

Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Bending machine FAVRIN 3100×30 PHLS CNC (A3708) Type: hydraulic Max worklength: 3100 mm Eletric motor (power) 75 HP Courant needed 380V Weight 32 ton Machine was previously used to bend Hardox workpieces. bending capacities examples: – 3100 x 25 mm > multi stage bending for large radiuses – 2500 x 30 mm > multi stage bending for large radiuses – 3100 x 17 mm > single stage bending – 2500 x 25 mm > single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

labeller GIERRE | Capsuling machine Year: 2000 Speed: 2.000 bph Direction: Linear Nr.2 adhesive station Capsuling machine 2 snare heads Distributore capsule a plateau Safety protections

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

Automatic tufting machine. Makes pattern in shape of circles. Can tuft mattresses. Frame is moving according to program. Tufting is done with Hector sewing machine.

For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).

creasing machine for board Make Sächsische Kartonnage Maschinen Model Creasing machine Year 1950 Creasing length 50 cm Creasing depth adjustable/variable Creasing span adjustable-variable Creasing thickness possible up to 4/5 mm board Available Direct

Type: Rolling machine UL 40 Parameters: Manufacturer: Šmeral Year of production / SO / GO: - / - / 2019 Location: Czech Republic Description: Semi-automatic machine for transverse hot wedge rolling UL 35 Šmeral redesigned to UL 40. Starting bar material: diameter 14-35mm, length 2500-4000mm. Diameter of rollers 600mm, width of rollers 400mm, max. Length of material feed 150mm.

Matteuzzi RAS 90 Buffing Machine Computer controlled Buffing machine for retreading DIMS: 12ft long x 7ft wide x 8ft high Weight: 2500kgs

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

Filleting machine for small whitefish Condition: good Working range: small witefish from 30 to 55 cm Capacity: 25-40 fish/min Power consumption: 1,5 kW Water consumption: 15 l/min Dimensions: 3,25 x 1,20 x 1,70 m Weight (net): 810 kg

1 RAELMA roll packing machine year 1999 working width 280 cm max roll diameter 45 cm entry conveyor rotational packing longitudinal welding 2 x top welding exit conveyor

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

Globe Bread crumber Stainless bread crumbing machine, 220mm diameter chute, 4Kw motor

W & H T 1441 FLAT PAPER HANDLE MACHINE

Baader Filleting machine for whitefish Condition: overhauled Working range: whitefish from 35 to 70 см (=0,4-2,5 kg) Capacity: 27 fish/min Power consumption: 2,2 kW Water consumption: 20-25 l/min Dimensions: 3,80 x 0,95 x 1,60 m Weight (net/gross): 930/1564 kg

Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.

harden machine 1x1x2m temperature max 1200C PLC Wärmebehandlungs Kammeröfen Wärmebehandlungs gienanth Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt t ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 5 KW Machine dimensions in cm: Width: 80 Length: 100 Height: 190 Delivery time: 20 working days after advanced payment

Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg

Sind cevapi and cevapcici automatic machine, NEW

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Type: ESB 3450 Automatic derinding with infeed conveyor belt High operator safety for derinding of flat cuts with infeed conveyor belt Cutting width: 400 mm Electric power: 0.88 KW Machine dimension in cm: Width: 80 cm Lenght: 110 cm Height: 120 cm Delivery time: 10 working days after advanced payment

Folding machine HELMUT LOTZE 3100×9 CNC (A3709) Max worklength 3100 mm Max tickness 9 mm Distance between clampblock — ram 300 mm Eletric motor (power) 15 kW Length 5050 mm Depth 1875 mm Hight 2040 mm Weight 15 ton ACCESORIES yes Additional info Type 116 Mechanical drive Cybelec CNC control Cap: 2500 x 10 mm / 2000 x 12 mm

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

MF-25 Corner Forming Machine

Tretter drill sharpening machine Length L -- R: 1200 mm Depth Fw --Bw: 1000 mm Height: 1500 mm Weight: 1,6 ton

One of the latest innovations by Baader for the fish industry. This machine is designed for filleting defrosted whitefish (with an average capacity of up to 40 filets per minute). Characterized by improved quality of smooth cutting even on soft fish (doesn't leave bloodstains or gaps on flesh). Easy to maintain at the production line, and easy to operate. Power: 4kW Voltage: 3x 400 V/ 50Hz Water consumption: 10L per/min Water pressure: 2,5 bar

This machine is designed for removing heads from the next fish species: cod, pangasius, catfish, and tilapia. Fish size range: 30 - 70 cm. Capacity: up to 40 fish per minute.

Inv. Num. : 6972 Parameters: Chamber dimensions: 10,000 x 6,000 mm Door size: 4,000 x 3,000 mm Equipment: Abrasive feed conveyor Components: Aviator Air purifier Compressor Filter Blasting machine with wheel conveyor

New Work Machine Cabin Manufacturer: NTcab External dimensions: 130x140x170cm LxWxH Curb weight: 1016 kg The cabin is therefore new and very versatilely equipped.

Brand: Bavelloni Type: Drilling machine Model: Trapano VT Construction year: 1992

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

Max. die-cut size: 230 x 230 mm (23x23cm) Min. die-cut size : 10 x 10 mm (1x1 cm) Max. Stack Height : 170 mm (17cm) (Height of cutting die 60 mm) Die-Cutting pressure : 5.700kg Die-Cutting strokes max: 11 p/min Max. machine output 660.000 sheets/h (feeding 1.000 sheets, label paper 80 gsm) Weight: 855 kg Very good condition

Universal like a handheld device, regardless of package size. If the daily volume of packages is limited, the M-PAC 3 comes into consideration. - For belts 5 – 15.5 mm wide, adjustable - 10 – to 20 strappings/min - Mobile, with lockable swivel castors - Package sizes independent - Adjustable working height - Weight: 50 kg The bandwidth depends on the weight of the package. From a weight of 20 kg, the width should be 9 mm. Attention: Belt rerouting by the operator! This is not a fully automatic machine!

The Multivac R535 packing machine from 2012 is about 11.3m long. It has a 607 mm upper film and a 623 mm undercarriage.

We have for sale: Manufacturer : Holweg Type : Roto Simplex 2 Bag length : 145 - 660 mm Bag width : 70 - 380 mm Speed : 800 bags/min. Year approx. 1965 Available: Now

UNWORK CENTRE TO 54 MANMOTOR POSTS BOB - 560 ROTANTE COLLECTION FOR BOBINE - 1600 MM BANCAL OF DISTRIBUTION WITH 3 TESTES TO LEGARE

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Equipments: Size: B65xT70xH160 cm Power supply: 380 V wire sizes: round wire No. 30 to 21 Issue size: up to 25 mm Speed: max. 170 stitches/min Block-/Sattelheftung Weight: approx .: 250 kg stapling speed: up to 170 staples / min as is