chp gas used for sale

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts

Key data: 1950 , 2437 , 11000

Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average

Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg

Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.

For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.

Key data: 3431 , 4767 , 10500

Jenbacher gas generator ( UNUSED ) , Model : J620GS-F75 Power Output : 3431 KWm / 4767 KVA Voltage : 10500V Frequency : 50 Hz Qty : 8 sets Used gas generator, about 4000 hrs

Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System  Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on  ...

This industrial plant was built in 2007 as a pilot project and is only used temporarily. The complete package includes numerous pumps, pneumatic and manual gate valves of various sizes, as well as ball check valves, flow meters as well as the entire pipeline construction and a control cabinet. Preferably, this system is sold as a package including self-dismantling. Details on request.

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke

From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions

From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-

ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

Agilent GC 6890N, Detector WLD Option: Extension with FID Injector: Split/Splitless with EPC LAN connection Agilent Chemstation B04.03

Key data: 220

MAN Lean Burn Biogas 2876 LE302 Containerised Generator. Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

1. PE 200 AAS, tipo a fiamma.(con schermo di controllo, potrebbe funzionare senza o con computer) 2. PE 400 AAS.(senza schermo di controllo) 3. PE 900Z, tipo grafite. Tutti in ottime condizioni e set completo di computer e accessori necessari.

Key data: 210 , 400

Tedom Cento 210 kW Biogas Container Generator Set Brand: TEDOM Package: CENTO 200 Engine model: TB 210 G5V TW 86 Fuel: Biogas Capacity: 210 kW Voltage: 400 Year: 2022 Hours: 1,000 Scope of supply: Full container with engine, alternator, frame, control panel, gas line, radiators, chimney etc. Additional info: In 2023 a new engine block was installed and the alternator was overhauled. (90k€ invoice). Original container and plant is from 2017. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Key data: 210 , 400

Tedom TB210 G5V TW 86 Complete Containerised Biogas Unit. Make and model: Tedom TB210 G5V TW 86 Capacity: 210kW Hours: 51 Year: 2015 Fuel: Biogas V: 400 Hz: 50 Scope of supply: Complete Containerised Biogas Unit Including: Engine, Alternator (Leroy Somer), Control Panel (ComAp IntelVision8), Base Frame, Gas line, 2 x Radiators, 2 x Air Intake, Silencer, Piping, Biogas Treatment and Condensare discharge system, Carbon filter. All documentation and diagrams. Inspection notes: Liners in good condition . Engine turned over easily. Has been kept heated. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Jenbacher 320 Stamford AC Generator Manufacturer: Jenbache Model: 320 Alternator Year of manufacturing: 2003 Rated Output Power: 1330 KVA Speed: 1500 RPM Voltage: 400 V Frequency: 50 Hz Phase: 3 Condition :Used Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg

Jenbacher 320 Empty containers 2 UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Ideal for Jenbacher 320 generators Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please write to us at Infoukpowergeneratorsltd for further information on arranging viewing or pricing details. ~ UK Power Generators Ltd Enquiries@ukpowergeneratorsltd.com 00447956518924

Agilent 7890A +5975C+7683(100 tray) with SSL + PTV inlet. And with pump. Agilent 7890A +5975C+7693(150 tray) with SSL + PTV inlet. And with pump. Both in very good condition.

Exhaust gas compensator MAN D2842

Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...

gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg

2015 Manufacture Date 0 hours since manufacture Stored continuously been stored indoors a temperature-controlled building since delivery (still crated) 7901S Taurus 60 (SoLoNOx) 5670/kWe Generator 13800 Volt 60 HZ (1800 RPM) 3 Phase No enclosure, open skid TURBOTRONICS PLC 4 with TT4000 Display FAT tested by Solar Turbines VFD start system Complete Air inlet filtration system Complete site (equipment) inspection performed by Solar 2019

Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg