chiller ska used for sale

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

X working range max .: 6500 mm Y Working range max .: 200 mm Control: SIEMENS SINUMERIK 840D Laser power: 3600 W Beam on: 12.222 h Plate thickness St. Max .: 10 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard configuration: Machine - Working range in X-axis for tubes 6500 mm - Outer circle diameter 200 mm - NitroLine - FocusLine - SprintLine - Laser power control - Programmable cutting gas pressure - Programm re-entry - Automatic shut-down device - Work area lighting Laser - Laser logbook function - Chiller Laser Cutting head - Lens cutting head with 155 mm focal length - ControlLine Controll - Sinumerik 840D - Teleservice Data Transfer - RJ45 network connection, USB-Interface Safety - CE marking - Multi-beam light barriers - Compact dust extraction unit 1500 Nm³/h - safety cabin with Macrolon panels Additional equ ...

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

Qty. 1 Second-hand blower and PET filling line Mfc.: SMI, SARCMI, KOSME, EC-JET, SIMONAZZI, ZAMBELLI, PROCOMAC, ACMI, ATLAS, SIAD, ASKI, SIDEL Built: 1976 – 2012 Plastic Cap Product: Still & sparkling water Capacity: 12 000 bottles/hour Scope of supply: Blower machines Filler Labeller Conveyors Shrinkwrapper Palletiser Compressors Chiller Dryer

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Sollich Type: MSV 750 A2 available: 2 machines YOM: 1995 output: from 350 to 850 kg/hour. different: good condition electrical: 330/400 VAC, kW different: 2 identical machines with water chiller We offer this machine in 'as is' condition, without warranty

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

bogie furnace 1x1x2m Temperature max 1200C PLC Data monitoring good quality Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gild ...

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

hardening furnace 1200 1x1x2m (possible various sizes) t max 1200C Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Afspændingsglødnng Hiærdning og anløbning Carbonisering (indsætning) Anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Ovne og anlæg til anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Varmebehandling Preshærdning Karbonitre ...

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

PET filling line - capacity: 10.000 bph – 1,5 L Year of manufacturing: 1999 – 2006 Control system: Siemens S7 Working hours: 26588 h (total on compressor) consisting of: Blowing machine Blowmax 10 year of manufacturing: 1999 incl. Chiller OHF 1250 Omega year of manufacturing: 1999 Preform dumping, feeding and orientation device year of manufacturing: 1999 High pressure compressor Ateliers Francois CE46BSG 40 year of manufacturing: 1999 Air conveying system year of manufacturing: 1999 Krones Bloc consisting of: Bottle rinser Krones Variojet 2160-054-126 with 54 rinsing stations year of manufacturing: 1999 Bottle filler Krones VP-L60-113 / SV10 / S LM wiht 60 filling valves and 10head screw capper year of manufacturing: 1999 Cap feeding system Gassner year of manufacturing: 1999 Labelling machine Krones Canmatic 600-10 RM year of m ...

CNC Plasma Auto Bevel machine KOIKE VERSAGRPH-6000 3DP (2014) Width 4500 mm x 43 M, thickness 6-40 mm; "Plasma""I""cutting: 6 to 40mm; ""V""cutting: 9to 30mm; Power supply 3-phase 440V; Fluid oxygen 7~9.9 kg/cm; Fuel gas 1~1.5kg/cm (LPG); Air 7~9.9 kg/cm"; Cutting speed: 0~6,000mm/min; Marking Soeed max. 18,000 mm/min; Rapid speed:24,000mm/min (2014) Cutting bed dim: 30M x 4.6M Rail Length: 30M; Span: 6M With Chiller, Power Supply, Panel box, Cable rail, compressed air dryer, dust collector and Transformer Rails and cutting bed Attached to rails and cutting bed of Lot 313 Make KOIKE Serial VG-A-0218 Model VG-6000DXI Year 2014

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

Key data: 1095 , 400

COMPLETE TRIGENERATION PLANT INCLUDING CHILLER AND COOLING TOWER Make and Model: JENBACHER 320 G.S N-L Fuel: Natural Gas Capacity: 1095 kW Year: 2007 Hours: 50,000 HZ: 50 V: 400 30,000HR MAINTENANCE SERVICE PERFORMED IN 2017 ON 28,000 hrs. Replaced 20 Cylinder Heads, Pistons complete with Piston Rings, Cylinder Liners Replaced Main Bearings Replaced Intercooler Overhauled Turbocharger, done by a specialist company Overhauled Plate Water Heat Exchanger, done by specialist company Camshaft checked and is in good condition Other works and checks not listed were carried out according to the GE Jenbacher schedule. Scope of supply: Gas engine genset, 2 x cooling tables, Gas line, Control panel, Switchgear, Silencer, Chimney, Piping, Power cables, Control cables, Chiller and Cooling Tower. Available for Sale Now. Price: 100,000€

Number of sanding units: 2 St. sanding width: 190 mm Sanding height max.: 2-180 mm LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneu ...

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Mobile laboratory refrigerator (+1 / +8 °C). Incl. grating and lattice rail. Refrigerator is as good as new. Mobile Laboratory Refrigerators (+1 / +8 °C). Incl. grating and grating rail. Refrigerator is as good as new.

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Tank made of stainless steel with a capacity of 80 liters. With mediacaña all over the body with chiller and agitation type anchor, opening of lid by hinge .mounted on stainless steel structure on wheels. with electrical panel. General characteristics: Sector of origin Feed Specifications: Volume 80 Background type klopper Half a cane Yes Type of agitation Ancora Lagging Yes Envelope wheels

Process chiller / chiller air-cooled, Type: TAEevo Tech 702 P3 M.T.A. S.p.A. TAEevo Tech 702 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankpan heating, phase monitoring, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 136 Cold water temp. Exit/ Entry (°C): 7 / 12 Volumetric flow rate (m³/h) 23.1 Available pump pressure (bar) 3.19 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 70,5 Max. current (A) 119.3 Starting current circuit (A) 235 Protection Class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2283 Connection Rp 3" Serial No.: 2200349423 Year of construction: 2019 Condition: Optical 2 , Technically ok (used) Used machines m ...

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

Manufacturer: SKAKO Model: 31514 Vibration motor: Manufacturer: SKAKO Model: 50E Electrical power:300 V; 12,5 A Overall dimensions: 3000 x 1250 x 1000 mm Trough dimension: 2950 x 900 mm

Year 2000 Iinstall 2001 Max web width: 48” (1219,2 mm) Impression cylinder circumference: 69” (1752,6 mm) Product size: 219 x 304,8 mm Only 21 mill impressions (genuine) Produces: 128 pages of 8 3/8” x 11 1/4 or smaller every revolution Great for books,bibles or coloring books Equipment: 2 Megtec auto-pasters dlp width 1270 Two web guide unit with double timson indeed unit 2 Units blanket to blanket print units Timson brush dampening system Complete chiller system with circulation 2 Technotrans alpha d cooling devices 1 Folder type m3c/4-2dSstitching system streamliner 2000I Ink pump (200 lit. deposit) Ink agitators Console cdps 1 Extra set of brand new rollers Extra spare partsI Ink remote control system with console Grafikontrol system Tipografic ink unit for second color (logo´s,etc…) 4.645 hours on production Plate bender Rima stacker Free of any ...

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...

C260 is the most compact deep draw thermoforming machine in his range keeping the maximum customisation that exactly meets the customer's production requirements. All this is possible thanks to the use of the IMA Safe technology which has developed robotized systems applied in the most critical areas: the product feeding area & the connection to the cartoner. Size changeover operations are rapid thanks to a reduced number of size parts. Technical data: Length mm 6000 Width mm 1530 Height mm 1850 Net weight Kg 2500 Frequency Hz 50 Voltage Volt 400 Production characteristics: Forming Depth 3 – 40 mm Production speed: up to 800 1-2 ml DIN ampoules/min up to 400 1 ml syringes/min Chiller dimensions 480 x 470 x 960 mm Film trolley dim. 860 x 800 x 1130 mm Additional format available 8 ampoules Format currently installed is for blister of 5 ampoules.

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: HP Indigo 7500 Printing press incl. chiller, included in the maintenance contract - First installation 2016 - 7-color license - Special Effects License (e.g. Raised Print, Mold Print) - Automatic Alert Agent License - One-Shot Technology License - Heavy-Substrate Drawer - Washing table HP EliteOne 800 Workstation - Support for touch input with 10 touch points - Intel Core i5 2.9 Ghz- 4 GB RAM- Windows 10 Pro- incl. table DFE: - HP ProLiant DL380p, Gen8 (!) - In ongoing production and maintenance contract On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

x-travel: 800 mm y-travel: 700 mm z-travel: 610 mm Control: Siemens 828 D total power requirement: kW weight of the machine ca.: 8,7 t dimensions of the machine ca.: m ONLY 2800 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,00 ...

SYNGOOD SG1218 laser was manufactured in 2015 in China. The machine has worked on the production of polygraphic die-cuts, and its versatility also allows cutting and engraving in materials made of among others sheet metal, wood, plywood and plexi. The elements are processed with a high-performance CO₂ laser with a power of 400 W, on a work table with a length of 1200 mm and a width of 800 mm. The laser is compatible with the most popular graphics programs such as CORELDRAW or PHOTOSHOP and also supports the most important graphics formats such as DXF and BMP. The machine is equipped with LASERCUT software, an optical system U.S.A. Lens II IV and a CW6000 chiller. The biggest advantage of the laser is its low number of working hours – the laser was used for only 10 hours. The total weight of the device is 1300 kg. Technical data of the SYNGOOD SG1218 laser engraving machine - l ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3 MTA S.p.A. TAEevo Tech 201 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. And built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 23.69 Max. current (A) 39,83 Starting current circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200393994 Year of construction 20 ...