chiller cooling used for sale

Description: Manufacturer no. 66558, REF 8326426, device no. 1-0488, see photos for more details Approx. Onsite Dimension. (l x w x h): 800 x 600 x 750 mm, weight approx.: 80 kg

Description: a total of 3 pieces, type SBG 801-GD-Q 40+169, SGL 801/450+367 (this item is only sold within the EU) Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 60 kg

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Wolff Apparatebau KG blanching and cooling line consisting of: Van Wees mobile elevating belt: s/s frame, plastic belt with dividers, belt width: 175 mm, distance between dividers: 165 mm, divider height: 50 mm, elevating height: 2930 mm, total dimensions: 3300 mm x 1100 mm x 3000 mm, Wolff Apparatebau KG blanching machine, type: B950/3000, machine number: 93-962, year of construction: 1993, 380 V, 50 Hz, 6.5 kW, dimensions: 4650 mm x 1550 mm x 3050 mm Wolff Apparatebau KG cooling drum, type: TRK950/3000, machine number: 93-963, year of construction: 1993, 380 V, 50 Hz, 10 kW, dimensions: 4650 mm x 1500 mm x 2400 mm s/s filter tub with circulation pump, inside dimensions: 1000 mm x 1000 mm x 950 mm, dimensions filter tub: 1400 mm x 1000 mm x 1130 mm, s/s platform, dimensions: 4100 mm x 1800 mm x 1980 mm, 3000 mm x 1100 mm x 1980 mm, 2900 mm x 1800 mm x 1980 mm, s/s switch ca ...

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

Originated from LVD lasercutting machine

Tumbler Iglu Scheid with cooling Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Tumbler Ruhle with cooling Model: MKR 150 Volume: 150 liters Dimensions: 120x100x135cm Electrical power: 3kW

General SKU401S1130 LocationBarneveld MakeEmerson network power TypeHPF12U302A3P10020 Mach.No.10940780001 Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck Information Year of construction2012 With switchcheck With switchgearcheck( as is) CEcheck Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra Specificationsthis machine is used to cool airTemperature control unitsLiebert HPFHeat exchangers > Temperature control unitsBrand > Liebert HPF What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

Linear device for industrial cooling of fruit in Mega boxes Producer: Mega Year of production 2016 DTR-- yes Productivity - approx. 800 kg/h, IP 55 Installed power 15kW Number of showers 20 water in a closed system Machine dimensions 8180x2085x1940mm Filling height 1225mm Width 650mm Dump height 1105(1350)mm Description: the device is used to cool the product in 600x400mm boxes, cooling is based on transporting the packages while immersing the product in ice water. Weight 2440kg

General SKU305U636 LocationBarneveld MakeEmde Nassau TypeTSK 250x8720 TL No.A412.0089 Year of construction2012 Main Features Motor4 KW Length8720 mm Inlet diameter210.1 mm Specified Features - Vertical screw conveyor Trough-modelcheck Diameter250 mm Length8720 mm Between inlet and outlet7880 mm Shaft diameter182 mm Inlet210.1 mm Outlet295 mm With jacketcheck 5000 mm long Max. temperature80°C With adjustable packing glandscheck Motor4 kW, 400 Volt, 1420/2860 rpm, (EX) Screw speed12/25 rpm Conveying height4587 mm With coverscheck MaterialStainless steel 1.4301 (304) Information Mounted inclined in framecheck Total height1,0 mtr Weight1338 kg CEcheck Floorspace10,3x0,4 m ATEX compatiblecheck Extra SpecificationsCool jacket length 5000mmNew arrivalsVertical screw conveyorsEmde NassauNew arrivalsConveying systems > Vertical screw conveyorsBrand > Emde Nassa ...

General SKU305U627 LocationBarneveld MakeStarick Fördertechnik GmbH TypeRFS-200/SoK Mach.No.1821.2694.01.05 Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm MaterialStainless steel 1.4301 (304) Information Year of construction2005 Total height0,5 m CEcheck Floorspace9.0x0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxNew arrivalsHorizontal screw conveyorsStarick Fördertechnik GmbHNew arrivalsConveying systems > Horizontal screw conveyorsBrand > Star ...

General SKU305U628 LocationBarneveld MakeEmde Nassau TypeRSK250X8200TL Mach.No.A409.0373-01 Main Features Motor4 KW Length8200 mm Inlet diameter210 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter300 mm Length8200 mm Between inlet and outlet7500 mm Shaft diameter250 mm Inlet210 mm Outlet210 mm With jacketcheck for cooling Motor400 volt, 3.3/4.0 kW, (Ex) With variable speed drive1420/2860 rpm Screw speed12/25 rpm MaterialStainless steel Information CEcheck Floorspace9,0 x 0,50 m Total height0,60 m ATEX compatiblecheckNew arrivalsHorizontal screw conveyorsEmde NassauNew arrivalsConveying systems > Horizontal screw conveyorsBrand > Emde Nassau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...

Key data: 1095 , 400

COMPLETE TRIGENERATION PLANT INCLUDING CHILLER AND COOLING TOWER Make and Model: JENBACHER 320 G.S N-L Fuel: Natural Gas Capacity: 1095 kW Year: 2007 Hours: 50,000 HZ: 50 V: 400 30,000HR MAINTENANCE SERVICE PERFORMED IN 2017 ON 28,000 hrs. Replaced 20 Cylinder Heads, Pistons complete with Piston Rings, Cylinder Liners Replaced Main Bearings Replaced Intercooler Overhauled Turbocharger, done by a specialist company Overhauled Plate Water Heat Exchanger, done by specialist company Camshaft checked and is in good condition Other works and checks not listed were carried out according to the GE Jenbacher schedule. Scope of supply: Gas engine genset, 2 x cooling tables, Gas line, Control panel, Switchgear, Silencer, Chimney, Piping, Power cables, Control cables, Chiller and Cooling Tower. Available for Sale Now. Price: 100,000€

BYSTRONIC BYSTAR 3015 4.4 kW laser, manufactured in Switzerland in 2012 is designed for cutting metal sheets made of black steel, stainless steel and aluminium. Workpieces with a maximum thickness of 25 mm (black steel), 20 mm (stainless steel) or 12 mm (aluminium) are machined with the highest precision and quality, using a 4.4 kW laser beam emitted by a reliable BYSTRONIC ByLaser 4400 laser source. The laser cutting machine is characterised by a large working area made of high-quality steel, with a length of 3000 mm and a width of 1500 mm, allowing for easy loading of workpieces with a maximum weight of 890 kg and ensuring high stability during the cutting process. The machine is controlled via an arm-mounted control panel with installed BYSTRONIC ByVision numerical control. The laser has been continuously repaired – the following components have been replaced during the use of ...

Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃  ...

Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 � ...

Cooling unit (chiller) - HYFRA VWK 30/1 (4 pcs.) Year of construction: Description: The device is in very good condition Cooling capacity approx. 10 kW Refrigerant R 407C The device has: - Compressor - own container for medium - Circulation pump - 1 x Cooler - Heat exchanger - 1 x fan The device after maintenance, fully functional with new refrigerant 3-month in-service guarantee in Poland Price: On request

Cooling unit (chiller) - E.Braun GmbH UC 14.K1W.LT Year of construction: 2003 Description: Cooling capacity approx. 20 kW Refrigerant R407C The device has: - Compressor - own container for medium - Circulation pump - Heat exchangers - Cooler - Fan The device after maintenance, fully functional with new refrigerant 3-month in-service guarantee in Poland Price: On request

Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, ball valve -Manufacturer: Danfoss, ball shut-off valve, unused in original packaging -Type: GBC 10s/009G7031 -Connection: 10 mm ODF -Dimensions package: 200/75/H55 mm -Weight: 0.3 kg

Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, ball valve -Manufacturer: Danfoss, ball shut-off valve, unused in original packaging -Type: GBC 10s/009G7061 -Connection: 10 mm ODF -Dimensions package: 200/75/H55 mm -Weight: 0.3 kg

Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, ball valve -Manufacturer: Danfoss, ball shut-off valve, unused in original packaging -Type: GBC 6s/009G7060 -Connection: 6 mm ODF -Dimensions package: 200/75/H55 mm -Weight: 0.3 kg

Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, ball valve -Manufacturer: Danfoss, ball shut-off valve, unused in original packaging -Type: GBC 16s/009G7053 -Connection: 5/8 ODF -Price: per piece -Number: 2 piece -Dimensions package: 200/75/H55 mm -Weight: 0.3 kg/piece

The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium  ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

Ghioldi extruder diam.80 low and medium density, original ALPINE 250 K/F IBC head. Oscillating towing on the frame, water-cooled towing cylinders, table width 1700mm, Cason treatment never used, automatic bubble guide, BST film aligner, bubble air replacement with IBC , air cooling with chiller, automatic spooler. Production varies according to the materials and external temperature, however, 220 kg/h can be reached. Doteco gravimetric system plus Moretto dosamaster. No. 01 new screw to be assembled, visible in operation, has worked a few days a month.

Brand new custom made powder grinding machine suitable for mixing powders of any kind for the cosmetic, food or agriculture industry. The main vessel volume is 200L and the working capacity is 100L. The main tank is equipped with water jacket connected to chiller for cooling or heating the powder. There is also a peristaltic pump for spraying liquids when needed. The whole machine is equipped also with vibration sifter with different meshes and vacuum loader especially designed to fill drums without any dust. All main electric components are Siemens.

A brand new industrial powder mixer grinder is for sale, suitable for the cosmetic, food, or pharmaceutical industry. The main container has a total volume of 200 liters and a working volume of 100 liters. It is equipped with a water jacket connected to a chiller for cooling or heating the mixed volume. Additionally, it features a vibro-sieve with various screens for different-sized fractions. The machine also includes a diaphragm pump for injecting liquid into the working vessel when necessary. The entire system is designed to operate in a closed environment to prevent dusting in the workspace. It also has a dust-free drainage system into various-sized containers or other types of vessels. All major electrical components are Siemens-branded. All specifications are visible in the photos.

Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould was ...

new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor

vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Temperature Controllers Equipped with a Self-optimizing microprocess controller (+/-1 C) for temperatures up to 140 C. Powerful pumps (pressure up to 6 bar) guarantee a high flow of process water and thus a short preheating time and because of it's direct cooling design, a high cooling capacity. Year 2006

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping

Blow head for LD-PE films with 80 nozzle insert and cooling ring available

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

small die-head with 60, 80 or 100 mm die-insert, with cooling ring