check weigh used for sale

Control NC 4 Built in 1995 Operating hours h 40000 Closing force t 50 Opening path mm 400 Holmma mm 355 x 355 Plate size 480 x 480 Screw diameter mm 25 Spray volume cm3 61.3 Spray weight gr 54 Spray pressure bar 2000

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

This is a portioning plant for the bakery industry The machine is made entirely of stainless steel. It has a conveyor belt table special for strand bread plants. Funnel capacity:180kg (Teflon coated). The weight of, This machine is variably available and can be designed according to your wishes. The machine is variable in height and also size of the dough pieces, etc. Optionally also tritt n Mehstreuer can be ordered.

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

BOGENSORTIERANLAGE Manufacturer Gremser Type: S102-A2 Manr.: 410663 Built: 1999 Maximum size width: 102 cm Length: 142 cm Minimum size width: 40 cm Length: 50 cm Material grades 60 g / m2 to 120 g/m2, securities Arc Alignment +-0.1 mm Processing Minimum: 30 m / min Maximum: 140 m / min Maximum power 140 cycles / min Maximum stack height feeder: 1550 cm Good sheet display: 1600 cm Poor bow delivery: 1100 cm Maximum lifting weight 1000 kg Supply voltage 500 V AC Machine weight 2000 kg Dimensions: Width: 190 cm Length: 1220 cm Height: 270 cm Inlet height: 1750 mm Note: Sorts sheets of paper with quality defects (holes, stains, scratches and other irregularities, damage ? Total fault diagnosis was renewed in September 2005 Investment costs: 156,000.00 € Mistakes reserved!

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Safety package 1 Structure of the device with s ...

Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Very ADDAX underground cable machine / New The cut range of 10 - 160 mm PVC, rubber, iron and lead cables can be processed. Drive: 15 hp/11 KW Weight: 1.3 T New ADDAX subterranian cable stripper can be used for cables with diameter of 10-160 mm out of pvc, rubber,iron and lead. Drive: 11 kw / 15 hp Weight: 1.3t Every time we have 12 different cable strippers on stock. New and second hand machines

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Model Year Arburg 520C 2200-675 Built Control Unit 11/1998 Steurung Selogica Snail Screw Diameter Mm 60 Spray volume injection volume Gr 474 Clamping force Clamping Force Sound 220 Holmen distances Tie bars distance Mm 520 x 520 Opening path Opening storke Mm 650 Machine Gew. Facilities Machine Weight Equipment Kg 7.200 1fach core train

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: Number: about 30 passenger coaches technical data Passenger coaches 1st year of construction: 1977 to 1981 2. Weight: 33 t 3. Seats: 72, 2nd class 4. Longitudinal racks 5. Length over buffer: 23700 mm , 6. Side length 23400 mm 7. Rotary pin spacing: 17600 mm , 8. Rotating salmon distance: 2700 mm 9. Total axis distance: 20300 mm 10. Wheelset type: YRP and YRF All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, et ...

Kat-No 10-1845 in very good condition! With friction gear motor for infinitely variable speed adjustment Stable and mobile application On frame with steering wheels with stopper, foot-adjustable With guide stripfor bottles and cartons transport Dimensions and weight: Bandwidth:8 cm Total width:38 cm Total length: 830 cm Height:100 cm Weight:200 kg Supplement: 895€ for frequency inverters For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Control Selogica Built in 2000 Operating hours h 19000 Closing unit Closing force t 60 Opening path mm 350 Holm size mm 320 x 320 Installation height min/max mm 200/550 Plate size 446 x 446 Spraying unit Screw diameter mm 30 Spray volume cm3 106 Spray weight gr 97 Spray pressure bar 2470 Dimensions and weights Dimensions LxWxH m 3.4 x 1.4 x 2 Machine weight Kg 2330 Other 2 Pump System 1 Tray Core Pull

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Control CC 100 Built in 1996 Operating hours h 25000 Closing unit Closing force t 175 Opening path mm 700 Installation height min/max mm 250/950 Plate size 820 x 520 Spraying unit Screw diameter mm 45 Spray volume cm3 318 Spray weight gr 286 Spray pressure bar 1520 Dimensions and weights Dimensions LxWxH m 5.7 x 1.8 x 2.3 Machine weight Kg 11500 Other 1 compartment Core pull New Screw size 50 mm

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Control NC 4 Built in 1993 Closing unit Closing force t 50 Opening path mm 400 Holm size mm 355 x 355 Plate size 480 x 480 Spraying unit Screw diameter mm 30 Spray volume cm3 106 Spray weight gr 95 Spray pressure bar 1995 Dimensions and weights Dimensions LxWxH m 3.8 x 1.2 x 1.8 Machine weight Kg 2700 Other 2 Pump System

Cat. No. 11-1040 New For liquid with a density of 1350 kg/m3 Material: V2A - AISI 304, 1.4301 Surface: Ground Upper and underbody: Klöpperboden Cylinder body: with flange DN 100 with sight glass with rupsing disc with CIP line with spray head through. 90 mm made of V4A with cable for spunding machine DIN 40 with side manhole 509 x 372 mm with low-screw shut-off valve for residual and clear drain with digital thermometer with residual drain line through m. 2"1/2 with ladder bracket with transport eyelets height-adjustable with 4 calotte feet Technical data Dimensions (mm) Total height inside: 1592 mm Dia. inside: approx. 4600 mm Total height outside: 4605 mm Dia. outside: --- Roof 426 mm height 3.0 mm thickness Cylinder 3000 mm height 2.5 mm thickness Underbody 426 mm height 3.0 mm thickness Feet 600 mm hei ...

Type of machine D 560-3910 NC 3 Type of control NC 3 Year 1990 unit Clamping Clamping force t 560 Opening stroke mm 860 Distance between tie bars mm 800 x 800 Mould fixing platen size h x v 1200 x 1200 Injection unit Screw size mm 95 Injection volume cm3 2450 Injection shot weight in Polysterol gr 2180 Injection pressure increased bar 1600 SIZE AND WEIGHT Dimension LxWxH m 10.6 x 2.1 x 2.3 Total weigt Kg (18000+12000) 30000 Additional information Wittmann Robot W200-282 Model 1990

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Type 470 V 1600-625 Control Dialogica Built in 1990 Closing unit Closing force t 160 Opening path mm 650 Holm size mm 470 x 470 Installation height min/max mm 300/ Plate size 715 x 715 Spraying unit Screw diameter mm 55 Spray volume cm3 427 Spray weight gr 360 Spray pressure bar 1600 Dimensions and weights Dimensions LxWxH m 5.8 x 2.1 x 2.1 Machine weight Kg 7800 Other Wittmann Robo W321-043CNC

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Manufacturer Ferromatik Type Milacron Elektra 100 S Control Built in 1997 Closing unit Closing force t 100 Opening path mm 920 Holm size mm 470 x 470 Installation maximum min/max mm 250/520 Plate size 690 x 690 Spraying unit Screw diameter mm 45 Spray volume cm3 254 Spray weight gr 227 Spray pressure bar 2000 Mass and weights Dimensions LxWxH m 7.6 x 1.8 x 2.2 Machine weight Kg 6930

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation maximum min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Mass and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1997 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation maximum min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Mass and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

Control NC 4 Built in 2001 Closing unit Closing force t 25 Opening path mm 350 Holm size mm 280 x 280 Plate size 390 x 390 Spraying unit Screw diameter mm 18 Spray volume cm3 23 Spray weight gr 20 Spray pressure bar 2868 Mass and weights Dimensions LxWxH m 330 x 140 x 180 Machine weight Kg 1650 Other 2 Pump systems

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

Cat. No. 11-3015 in very good condition Two-phase decanters, also known as sewage decanters, are used for the continuous separation of solids from liquids with a high solid content. Due to the high speed of the drum, the solid particles settle on the drum wall and are continuously transported by the built-in conveyor screw to the solid discharge. The almost solid-free, clarified liquid leaves the separation space via openings at the opposite end of the drum. Built: 1973, Max speed 5000 rpm Power: approx.3000 Ltr/h Specific weight of the solid in the medium slingshot max. 2.3 kg HxWxD: 95 x 220 x 130 cm Weight: 745 kg For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scop ...

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Control NC 4 Built in 1999 Closing unit Closing force t 25 Opening path mm 350 Holm size mm 280 x 280 Plate size 390 x 390 Spraying unit Screw diameter mm 22 Spray volume cm3 41.7 Spray weight gr 38 Spray pressure bar 2060 Mass and weights Dimensions LxWxH m 330 x 140 x 180 Machine weight Kg 1650 Other 2 Pump systems

Alternating silo type WSD 18/ 1 bar, capacity approx. 18 m3, net weight approx. 2,900 kg, Stand area 2,500 x 2,500 mm, total height 7,100 mm, cone 60, outlet height 1,300 mm, outlet flap NW 250 Other: Neusilo, blasted, primed, lacquered RAL 9010 (pure white)

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Sa ...

Manufacturer Arburg Type 470 V 2000-675 Control Dialogica Built in 1992 Engine hours h 37403 Closing unit Closing force t 200 Opening path mm 500 Holm size mm 470 x 470 Installation maximum min/max mm 300/950 Plate size 715 x 715 Spraying unit Screw diameter mm 50 Spray volume cm3 353 Spray weight gr 295 Spray pressure bar 1350 Mass and weights Dimensions LxWxH m 5.8 x 2.1 x 2.1 Machine weight Kg 7800 Other 1 compartment core train

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total power / connected power: 14 kW; 380 V We ...

Manufacturer Ferromatik Type Milacron Elektra 100 S Control Built in 1997 Closing unit Closing force t 100 Opening path mm 920 Holm size mm 470 x 470 Installation maximum min/max mm 250/520 Plate size 690 x 690 Spraying unit Screw diameter mm 45 Spray volume cm3 254 Spray weight gr 227 Spray pressure bar 2000 Mass and weights Dimensions LxWxH m 7.6 x 1.8 x 2.2 Machine weight Kg 6930

Settling container, type CB6000, capacity approx. 6 m3, payload approx. 10 to, Dead weight approx. 1000 kg, stand area 1,700 x 1,650 mm, outlet height 1,050 mm, outlet flap NW 250