centerless grinding used for sale

Csepel FKP 326-10 In good condition and working now The machine has new siemens brand full pnc operating system

Specifications: - Table size 2300 x 800 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 3700 x H 1400 x D 1600 mm - Weight approx. 600 kg

Minimal diameter of the gear wheel : 350 mm Maximum diameter of the gear wheel : 280 mm Max. thread diameter : 200 mm Min. thread diameter : 3 mm Max. length : 700 mm Machine is fully equipped : change gears, grinding wheels, manuals, tooling

surface grinding machine, hydraulic magnetic chuck, with travels X 483mm, Y171mm, Z405mm,

Saacke UWIE 5 axis grinding machine Numroto system Robot automation Filtration systm Greasing units Machine can be seen in working condition

Machine dimensions: 3500x2300x2100 mm Max. grinding length: 1000mm Max. grinding width: 400mm Standing weight: 4000 kg. The machine can be tested after prior agreement. Hydraulic repair required.

width of the strips: 100 mm band length: 920 mm engine output: 0,35 kW saw band speed: 7 m/sec. Table surface: 300 x 150 mm roll diameter: 58 mm dimensions: 460 x 400 x 210 mm voltage: 380 V weight of the machine ca.: 15 kg Equipment: - Table model - 1 grinding belt - Steel grinding table with planed surface - Belt alignment via two Threaded rods with star grip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BPH 20 NA machine for sale, year 1966. GO performed in 2004 by Procházka-Moravec. Also installed Heidenhain measuring. Table clamping surface 200 x 630 mm. max. revolutions 2440/min.

X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t.

Grinding length: 500mm, grinding width: 200mm, clamping surface: 200x600mm, length: 2570mm, width: 1450mm, weight: 1.5t.

Drill diameter maximum: 80 mm Drill diameter minimum: 4 mm Make Farman FC 80 N Type FC 80 N Year 2008 universal drill grinder farman bohren schleifer Grinding length (mm)Min = 4 mm Grinding width (mm)Max = 80 mm Grinding heightAngle = 40 - 180 Wheel diameter (mm)3 HP / 400 V Stone = 180 x 50 x 31.75 incl. coolant systemincl. dressing unit  

X-travel: 1000mm, y-travel: 600mm, z-travel: 400mm.

Weight: 7.6t, with documentation and accessories, an inspection is possible.

Rotational speed: 1400-2800/min, table dimensions: 400x150mm.

X-axis: 55mm, B-axis: 137°, C-axis: 360mm, with robot, part recognition, pallet changer, measuring control, grinding wheels, rams and dressing pots, an inspection is possible.

Sanding length/width: 450mm/300mm, workpiece height: 350mm, max. sanding wheel width: 50mm, weight: approx. 1500kg.

Connected load: 1.6A, including documentation and some accessories.

Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm.

Max. grinding length/ width: 600/ 375mm, max. working height: 465mm, max. load: 300kg, groove width: 16mm, length: 3300mm, width: 2700mm, height: 2380mm, weight: 3.5t, including accessories and documentation, was maintained regularly.

Machine bed length: 16,000mm, roller table diameter: 200mm, load: 150kg/m, band width/ length: 150/ 3500mm, with documentation, the machine needs overhauling.

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Connected load: 9.5kVA, was maintained regularly, an inspection is possible.

Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories.

Capacity: 200l, rotational speed: 1000-2700/min, connected load: 5.5kW, weight: 1.9t.

Year of construction: 1968/ 69, sheets are processed by means of sanding belts, the entire electrical system and extraction system have been renewed, another machine of identical construction is available.

Part Number 6291 TECHNICAL DATA - max width of the workpiece 1350mm - max height of the workpiece 100mm 3 aggregates: 1) transverse aggregate with pneumatically pressed shoe 13/17kW 2) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW 3) combo unit (2 rolls) with pneumatically pressed shoe 13/17kW in advance: - rubber pressure roller - sequential shoe - aggregate - rubber pressure roller - aggregate - rubber pressure roller - aggregate - slip rubber roller, pressure roller - cleaning brush 1,5kW bottom: - slip roller - 5 segment feed tape with vacuum pump - pump motor 7,5kW - feed speed adjustable by 4kW geared motor - feed speed 5-26m/min - oscillation of pneumatic tapes on photocells - blowing of feeding belts - all units equipped with a sanding belt cleaning system - lifting the electric table - lifting motor about 0,55kW - de ...

I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.

Prior sale reserved - errors possible Internal Reference Number: D-1143-2

Voltage: 220-380V, without documentatio

Grinding area: 630x250x300mm, clamping surface dimensions: 700x250mm.

X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.

Rotational speed: 0-15/min, without documentation.

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Prior sale reserved - errors possible Internal Reference Number: D-1143-3

Working diameter: 95-150mm, rotational speed: 2250-6000/min.

Suitable for grinding of metals and other materials, with variable clamping options und manual operation.

Operational voltage: 380V, nominal current: 20A.

Specifications 1.3.1 Dimensions, space requirements, weight, energy requirements Dimensions, weight Machine incl. control cabinet Length x Width (depth) x Height (incl. Levelling elements): approx. 3,600 mm x approx. 2,400 mm x approx. 2,500 mm Minimum height requirement: 3,500 mm Net weight: approx. 8,500 kg Pay attention to the set-up plan! It contains all connection data, space conditions, etc. necessary for energy supply and installation. 1.3.2 Spray-suppression cabin, full-space cover of the machine View into the machine interior: safety window (window composite) Design: polycarbonate lens protected on both sides Cover of mounting or maintenance openings: Sliding door(s) hinged and/or removable body parts Cover of the operators side, loading and unloading opening: sliding door, loading hatch Activity: - Foldable body parts,sliding doors of assembly and maintenance openings: manual - ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Technical data Largest sandable bore:100 mm Maximum grinding depth: 100 mm Largest workpiece diameter inchuck: 120 mm Bore diameter of the hollow spindle : 330 mm Workpiece spindle center above the ground: 1240 mm Mounting diameter of the inner grinding spindle trestle:100/120 mm Diameter of the outer grinding spindle: 140 mm Maximum stroke of the two internal grinding machine tables Z-axis: 500 mm X-axis: 140 mm Table speed infinitely variable: Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Specifications Largest grindable bore: 100 mm Maximum grinding depth: 100 mm Largest workpiece diameter in chuck: 120 mm Diameter of the hollow spindle bore: 330 mm Workpiece spindle center above the floor: 1240 mm Diameter of the grinding spindle mounting blocks: 100 mm Diameter of the external and plane grinding spindle holders: 140 mm Maximum stroke of the two internal grinding machine tables Z-axes: 500 mm X-axes: 140 mm Table speed infinitely variable Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Workspace: External grinding ? Top height: 181 mm ? Center width: 1000 mm ? grinding length: 1000 mm ? Grinding diameter min./max.: 5 / 360 mm ? Grinding length for penetration grinding: 250 mm workpiece weight: 250 kg Grinding spindle: ? Cone 1:10 ?120 ? Tool holder: ?304.8 Workpiece spindle ? Mk4 ? ? 24 mm Feed speed: ? Grinding spindle min./max.: 0.01/15000 mm/min ? Workpiece table min./max. .: 0.01/15000 mm/min Spindle speeds: ? Stepless from 1580 to 2040 rpm Workpiece spindle speeds: ? Stepless from 1 to 1000 rpm Dimensions (L X W X H): 5600 mm x 3700 mm x 2500 mm ? Minimum height requirement: 3500 mm Weight: 10300 kg Year of Manufacture: 2001

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

There are five metal working machines available (1) Cylindrical Grinding Machine Karstens (2) Lathe Iberimex MOD. T6 (3) Multi-Spindle Drilling Machine (4) 2x Thread Cutting Machine Weiler, the machine can be visited.

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

Weight: 2.2t, including documentation.