cb ferrari used for sale

We sell here a vacuum sealer from the manufacturer Komet, type S 501 in a very good used and functional condition. The device runs on 400 volts, 3.5 kW, large chamber W/D/H 80/50/23 cm, electric lid opening, Busch vacuum pump 160 cbm/h, fumigation, rollable, workshop tested, ready for immediate use, dimensions W/D/H 100/75/120 cm, others on request.

max. plate size: 625 x 550 mm max. speed plates: 30 /h resolution of impression: max. 2540 dpi Violet Laser incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID2816 Liebherr R964 BBW year/Year of construction 2001 approx. 12000 hours/hours Material handler, approx. 16.5 m range, 3 cbm handling grab, optioanl 1 x poly grab and 2 shell grab available, central lubrication, camera on the boom Material handler, approx. 16.5 m reach, 3 cbm material handler, optioanl 1 x poly grab and 2-tray grab available, central lubrication, camera on boom

ID2809 Teka Mixomat 3000 year/Year of construction 1999 Semi-mobile concrete mixing plant, 80 cbm/h, high-performance compulsory mixer THZ3000 (3000 litres), insulated housing, row dispensers, binder scales, water scale, dust extraction, silos (4 x 35 cbm, 1 x 28 cbm), Pikotomatik control renewed in 2019, automatic high-pressure cleaning for mixers, optional with electric aggregate Semi-mobile concrete batching plant, 80 cbm/h, high-performance forced action mixer THZ3000 (3000 litres), enclosure insulated, in-line feeders, binder scale, spirit level, dust removal, silos (4 x 35 cbm, 1 x 28 cbm), control picomatics renewed in 2019, automatic high-pressure cleaning for mixers, optionally with power generator

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

Universal Roborts ,model, ur3 Serial number 2017332039 Year of manufacture 2017 with driven rollers Bannō Working width approx. 600 mm so security around the house Acrylic glass with aluminum frame belonging to a robot control Manufacturer Universal Roborts cb31ur3

Used overhauled Compressor Siad Low and High pressure System for 1850 CBM Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022 like new and ready for delivery Machine has 1850 CBM of power Complete replacement of the Baty and replacement of bands bearings gaskets valves ATLAS Copco ZR4 screw overhaul with replacement of air filter oil filter and vapor filter ACS Z oil shuttle KIT intake KIT exhaust silencer filter flexible coupling replacement greasing of engine bearings and general compressor control The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need The machinery is guaranteed a 12 month or 2000 hour warranty on all replaced components Only HP LP tank and dryer need to be added The two machines Booster equipment and LP compressor Atlas were purchased by the same company where they increased its compres ...

Used Bottle Washing Machine KLINGER S16 2 90 speed 7000 BPH Model S 16 2 90 Year 1993 Production capacity 7 000 BPH with 2 L bottles Basket plastic with the possibility of washing bottles with max diameter of 95 mm Type of wash suitable for washing glass bottles through caustic baths Dimensions and weight L 9 x W 3 30 x H 3 05 m 19 000 kg Material stainless steel Description of the washing cycle 1st wash Capacity 45 L Maximum allowed operating temperature 150 C Maximum allowed operating pressure 5 bar 2nd wash Capacity 150 L Maximum allowed operating temperature 110 C Maximum allowed operating pressure 2 bar Technical data Nominal capacity 7000 BPH Range of control 4000 8000 BPH Total washing time 7 1 min Time of cycle 8 2 sec Scheduled execution time 16 min Bottles per row 16 Total rows 117 Housings 1600 Loaded rows 100 Preheating Total time 3 min Effective treatment time 2 6 min Sodium ...

General SKU212T510 LocationBarneveld MakeFerrariventilatori TypeFS 311 P4XRD90 Mach.No.1978778 Specified Features - Blower MaterialStainless steel Information Year of construction2019 CEcheck Technical specs Extra information1910 rpmBlowersFerrariventilatoriBlowers > BlowersBrand > Ferrariventilatori What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used Syrup Room 15 000 Lt h PROGECO 2003 This is a used Syrup Room from PROGECO a well known manufacturer in the industry The model is SS 450 and was manufactured in 2003 It has a speed of 15000 liters per hour making it a suitable option for high volume syrup production Currently the Syrup Room is in a ready to operate state and comes equipped with necessary safety features to ensure secure operations Additionally manuals are provided to facilitate easy installation and maintenance The Syrup Room runs on V 380 kW 37 and Hz 50 electrical data making it a reliable option for powering large scale syrup production operations With its high speed capacity and reliable performance this used Syrup Room from PROGECO is an ideal solution for any syrup production facility Technical Data 4000 liter agitator sugar dissolving tank dissolution exchanger plate heat exchanger for 12 000 liters for heat  ...

General SKU004U062 LocationBarneveld MakeEngelsmann TypeKSM-9 Cbm No.10 562 Year of construction1985 Main Features MaterialStainless steel Volume12000 Ltr. Motor16 KW Specified Features - Pre-mixer MaterialStainless steel 1.4541 (321) Pre-mixerConical screw mixer (1x) Capacity12.000 Ltr, Useful 9.000 Ltr Vessel sizesdia. 2100x5050mm Manholedia. 500mm Inletdia. 150mm Motor11/16 KW, 500 Volt (Ex) Speed mixing shaft3/6 Rpm Information Floorspace2,2x2,2 M Total height6,5 M Weight8500 KG ATEX compatiblecheck Extra Specifications- Jacketed screw (120 Ltr), Working pressure 4 bar (Test pressure 5,2 Bar) Pre-mixersEngelsmannMixers > Pre-mixersBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

Driveway refrigerator Gram Baker M 1500 CBG Capacity 1422 ltr. for 1 trolley 60x80 or 2 x 60x40 Temperature -5° to +12° C Insulation 60 mm Refrigerant R 290 Stainless steel As good as new! Connection 230V, 505Watt Dimensions: approx. 880 x 1088 x 2360 mm WxDxH Dimensions inside: approx. 732 x 900 x 1900 mm WxDxH Aggregate internal Occasion More bakery machines in stock!

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: compressed air supply system, Operating hours: 2169, Flow: 1 cbm/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE

Bakery freezer Gram Blast Freezer Model: BAKER SF 930 CBH Stainless steel for sheet metal 600 x 800 Digital temperature display Freezer is ready to plug in with 20 pairs of support rails Freezer with refrigerant R 404 A Connection: 230V/1462Watt Dimensions: 740 x 1010 x 2170 mm, WxDxH Occasion Many more devices in stock!

60 cbm aluminium silo Manufacturer: Zeppelin Silo diameter approx. 2.40 m Silo height approx. 15 m

Freezer, storage freezer Model: Baker F 930 CBH Stainless steel for sheet metal 600 x 800 Digital temperature display Ready to plug in with 20 pairs of support rails Refrigerant R 404 A Connection: 230V/721Watt Occasion More freezers in stock!

60 cbm aluminium silo Manufacturer: Zeppelin Silo diameter approx. 2.40 m Silo height approx. 15 m

Model: Baker F 625 CBH 2E Stainless steel for sheet metal 600 x 400 Digital temperature display from -5 to -25 °C with support rails Refrigerant R 404A Connection 230V/381 Watt Dimensions: 820 x 770 x 2000 mm, WxDxH Occasion Come to our bakery equipment warehouse!

60 cbm aluminium silo Manufacturer: Zeppelin Silo diameter approx. 2.40 m Silo height approx. 15 m

ID3197 Wolf TSP 124 year/Year of construction 2020 1850 kg Bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 m², throughput/hour: 52-77 cbm/hour, working pressure: 280-300 bar, oil requirement: 150-200 l, max. pressure: 320 bar, with Lehnhoff MS21 quick coupler bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 sqm, throughput/hour: 52-77 cbm/h, working pressure: 280-300 bar, oil requirement: 150-200 l, pressure max.: 320 bar, with quick coupler Lehnhoff MS21

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

ELEXA E560 CNC unit Axis travel x mm 1450 Y-axis travel mm 520 Z axis travel 420 mm ISO 40 spindle attachment Spindle speed Rpm 20,000 Electrospindle tilting head Spindle power 24 kW Fixed table 2000 x 560×400 mm Chain tool magazine No. 60

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution

Technical data baler: Manufacturer Lindemann Type BIGRO 1020 Pressing force main press 100 t Specific pressing force 12.12 kg/cm² Pressing force free rammer 24 tonnes Chute dimensions 1,040 x 1,400/2,000 mm Bale dimensions 830 x 1100 mm (h x w), variable length Drive power of baler 2 x 55 kW Wirbulator drive power 11 kW Tying 4-fold vertical, fully automatic Throughput rates with a bulk weight of bulk density of 20 to 30 kg/cbm approx. 10 tonnes/hour Bulk density from 40 to 60 kg/cbm approx. 18 tonnes/hour Bulk weight from 70 to 100 kg/cbm approx. 28 tonnes/hour Throughput volume in single-shift operation in 2021: 15,760 tonnes Filling volume of hydraulic oil tank 2,250 litres Transport weight of press approx. 30 tonnes Additional equipment on the baler: Free rammer in front of the counter blade with 24 t pressing force Hardox base plate, bolted, exchangeable Wirbulator, drive power 11 ...

Continuous Butter Making Machine - CBM, with an output of 1.500 kg butter per hour and an input of ± 3.000 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Product area of stainless steel. Frame of painted steel. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collecti ...

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

Additional title: Well pump, Flow: 25 l/s, Total head: 120 cbm/h at 9 bar, Power: 58.5 kW, Current: 117 A, Voltage: 380 - 660 V, Features: Motor: U861-2/68; Connection: DN150; Check valve: RV DN150 PN16; Cable/length: 130 m 3 + 4 x 25 round

WINKWORTH PV50 Process Vessel, all stainless steel construction, 50 ltr capacity, jacketed vessel for oil heating and cooling. 500 ID x 330mm deep. Vessel fitted with CBO and valve, HAAKE key interlock system, 1/3rd hinged inspection lid with safety grill. Gate type mixing paddle with hinged PTFE scrapers, paddle lift out, hinged via hand operated hydraulic pump. Tricoolthermal HTF150S-12 heating / cooling system. Jacket - Design Pressure 3.5 Bar, Test Pressure 6.7 Bar, Design Temp 100°C Skid mounted on 4 lockable castors with control panel, features: Mixer Start / Stop Mixer RPM display and variable speed control Discharge valve Open / Close with indicator lights Oil heater control with temperature display Overall Dimensions: 1550 x 1250 x 1800 mm height. Net weight 490 kg Year of manufacture July 2014

Blast Freezer Refrigeration Unit Bitzer 16 HP Two-stage with evaporator LH135-S6j-16.2Y, 63,5 cbm/h Vaporizer Crocco Italy

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Vegetable cutting and washing line Line composed of: Product elevator using plastic belt with buckets Dimensions: 2740 x 200mm useful Brand: T.PACK S.L Model: EV-2740X200 Year 2005 Cutter, slicer and dicer for vegetables (potatoes in its last application) with a continuous work system for uninterrupted production. three-dimensional cuts that have four wavy surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140mm) in any dimension. Makes smooth or wavy dice or strip cuts, three-dimensional cuts that have four wavy surfaces, and smooth cuts of a wide variety of fruits and vegetables. Slices: 1/16 – 3/4 (1.6 – 19.1 mm) Dicing: A combination of the slicing blade, cross blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjust ...

current capacity: - kVA number of controlled axis: - workpiece weight: - kg Welding robot with 2 turning tables Category: Robots/Automation 2 tables, each 1800 x 550 mm 6-axis robot + turning table and travel path Burner cleaning Binzel Power source Fronius Transpuls Synergic 4000 including water cooling Not operational (in need of repair, spare parts carrier or for Restore - servo axis 7+8 report errors) Sale ex site (without dismantling) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connection voltage: 230 Volt weight: 7,2 kg Spiral diameter: 6-20 mm Electric spiralizing machine with manual cutting and bending unit. Only suitable for plastic spirals! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

For sale is a complete paper press line consisting of a Lindemann bale breaker / cardboard ripper, type PC 1000/1650, a Lindemann bale press type Bimax 20, including the complete conveyor technology and a Luehr dust extraction system. Technical data baler: Manufacturer Lindemann Type Bimax 20 Pressing force main press 100 t Specific pressing force 9,91 kg/cm² Pressing force free rammer 24 tonnes Chute dimensions 2,000 / 1,400 x 1,060 mm Bale dimensions 980 x 1100 mm (h x w), variable length Drive power of baler 5 x 22 kW Wirbulator drive power 11 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk weight of bulk density of 20 to 30 kg/cbm approx. 10 - 12 tonnes/hour Bulk density from 40 to 60 kg/cbm approx. 18 - 26 tonnes/hour Bulk weight from 70 to 100 kg/cbm approx. 28 - 40 tonnes/hour Bale weights approx. 650 to 950 kg Throughput volume in single-shift operation in ...

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Centrifugal fan, centrifugal fan, centrifugal fan S&P, ABB CBT-60 N PTC fan wheel diameter: approx. Ø 240 mm motor: 0.18 kW 2780 rpm 230 / 400 V 3 AC 50 Hz intake connection: Ø 110 / 155 mm output flange: Ø 61 / 94 mm fan base: 120 x 120 mm used, tested ! dimensions: 335 x 260 x 380 mm

Capacity: 18000 bottles/h closing heads: 24 pieces, Power: approx. 5 kW, Water: approx. 200 l/h, Compressed air: approx. 2 cbm/h, Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm, Running direction: right - left, Material: Stainless steel, wear-resistant plastic, Base construction: miniaturized, hygienic machine table in outward beveled design, Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...

Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...

Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle

Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK) Year of manufacture 2007 Operating hours 11,970 hours, as of March Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200  ...

Closed stainless steel butter silo. Single jacketed. The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of 4.0 kW - 380 V - 8,9 Amp). Total capacity: ± 3.000 kg. Manhole of 400 x 500 mm on one side and a sight glass on the same side. 3x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) / adding the pipe of a reworker on the other side and 1x at the back. CIP cleanable with 2x spraybowls in the top. Breather on top. Outfeed plate with 2x DN100 product connection on the outfeed of the silo. Renewed stainless steel control panel (2018, VSTechniek) with frequency converter, on/off switches and speed regulation control. Electric scheme available. Including 1x outfeed rotary lobe pump, Alfa Laval - LKM, type 2130A, serial number: 155891/01C, motor: 1,1 kW - 1455 / 39 rpm and 1x CIP return centrifugal pump, Hilge, HY ...

Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...

Blower, Fabr. Eichelberger, Volume: 5000 cbm/h, Crimping 100 mm WS, 3.0 Kw., 400 V.

Overview This canning machine CB50F from American Manufacturer, Pneumatic Scale Angelus was built in 2020. It has been well maintained with regular servicing and is in immaculate condition. It has been recently upgraded with Teflon hoses to the fill heads. Tech. Details Capacity - 3000 cans per hour. Can formats 330ml 440ml 500ml 560ml Can end spec - 202 CDL Dimensions (Floor) - 3121mm x 946mm Added bonus of UK and Europe wide engineering support (cost at buyer expense)