cast pp used for sale

pneumatic cylinder, standard cylinder, double-acting, with flexo coupling FESTO DNC-50-400-PPV-A 163379 stroke: 400 mm rod diameter Ø 20 mm rod thread: M16 x 1,5 pmax.: 12 bar with flexo coupling FK-M16X1,5 used, tested ! Dimensions: 740 x 65 x 65 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNN-40-450-PPV-A 1191R stroke: 450 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax.: 12 bar New ! Dimensions: 620 x 55 x 55 mm

pneumatic cylinder, standard cylinder, double-acting FESTO DNC-63-250-PPV-A 163409 stroke: 250 mm Rod diameter Ø 20 mm pmax.: 10 bar with pivot used, tested ! Dimensions: 510 x 140 x 130 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-40-400-PPV 163361 stroke: 400 mm rod diameter: Ø 16 mm rod thread: M12 x 1,25 pmax: 12 bar spare part for machining center HECKERT CWK400 D !, among others! used, tested ! Dimensions: 565 x 54 x 54 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DNC-50-175-PPV-A 163368 stroke: 175 mm rod diameter: Ø 20 mm Rod thread: M16 x 1.5 pmax: 12 bar used, tested ! Dimensions: 355 x 65 x 95 mm

Linear actuator FESTO DGPL-40-400-PPV-A-B-KF-GK-SH 175136 stroke: 400 mm piston diameter: Ø 40 mm Carriage: 167 x 82 mm pmax: 8 bar New ! with documents ! Dimensions ( Linear actuator ): 700 x 97 x 91 mm Dimensions ( packaging ): 730 x 200 x 150 mm

Pneumatic cylinders, standard cylinders, double-acting FESTO DNC-40-10-PPV-A 163336 stroke: 10 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm Rod thread: M12 x 1,1,25, length 23 mm pmax: 12 bar New ! Dimensions: 175 x 55 x 55 mm

Linear actuator FESTO DGP-40-700-PPV-A-B 175136 stroke: 700 mm piston diameter: Ø 40 mm Carriage: 171 x 21 mm pmax: 8 bar New ! with documents ! Dimensions: 1000 x 65 x 88 mm

Pneumatic cylinders, standard cylinders, double-acting FESTO DNC-40-10-PPV-A 163336 stroke: 10 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm Rod thread: M12 x 1,1,25, length 23 mm pmax: 12 bar New ! Dimensions: 175 x 55 x 55 mm

Pneumatic cylinder, standard cylinder, double-acting, 2 pieces FESTO DSN-20-80 PPv 592R stroke: 80 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, length: 20 mm mounting thread: M22 x 1.5, Length: 18 mm pmax: 10 bar As good as new ! Dimensions ( pneumatic cylinder ): 570 x 40 x 32 mm Dimensions ( packaging ): 570 x 70 x 40 mm

Magnetic coupling pump head, pump head SONDERMANN PUMPEN + FILTER GmbH & Co. KG RM-PPsw-VGKKK-20/220-60 PUMA.com 20.2206.006 Qmax.: 220 l/min Hmax.: 20 mWS Connection ( suction side ) : Ø 44 mm / G 2 ( inch ) Seal: O-ring connection ( pressure side ) : Ø 25 mm / G 1 1/2 ( inch ) seal: O-ring Flange diameter: Ø 163 / 124 mm bolt circle diameter: Ø 150 mm hole diameter: Ø 6.5 mm Material: PP, FKM New ! Dimensions: 186 x 165 x 155 mm

float magnetic switch, float switch, level switch, level switch, level switch KSR KUEBLER ABRPP 1,5-PPO-L 150/12-PP44A 730931-1 Immersion depth: 150 mm 1 Switching point Flange thread: G 1 1/2 Float: Ø 42 mm Control box: 83 x 83 x 60 mm used, tested ! Dimensions: 230 x 85 x 105 mm

Float magnetic switches, float switches, level switches, level switches, level switches KSR KUEBLER ABRPP 1,5-PPOS-L 330/12-PP44A 730931-2 Immersion depth: 330 mm 2 switching points Flange thread: G 1 1/2 float: Ø 42 mm Control box: 83 x 83 x 60 mm used, tested ! Dimensions: 410 x 85 x 105 mm

Pneumatic cylinder, double-acting FESTO DNN-40-25-PPV-A stroke: 25 mm piston diameter: Ø 40 mm rod diameter: Ø 16 mm Rod thread: M12 x 1,25, Length: 25 mm pmax: 174 psi ( 12 bar ) New ! Dimensions: 190 x 54 x 54 mm

Probe M&H PP21.00 21.00-ME 15530 clamping range: Ø 25 mm, length: 28 mm New ! Dimensions ( probe ): Ø 25 x 57 mm Dimensions ( packaging ): 86 x 47 x 42 mm

Pneumatic cylinders, standard cylinders, double-acting FESTO DNG-320-160-PPV-A 151897 stroke: 160 mm piston diameter: Ø 320 mm rod diameter: Ø 63 mm rod thread: M48 x 2.0, length: 95 mm pmax: 10 bar as good as new ! Dimensions: 510 x 410 x 340 mm

Flat cylinder, compact cylinder, pneumatic cylinder, double FESTO DZH-25-40-PPV-A 151122 piston diameter: Ø 25 mm stroke: 40 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar New ! Dimensions: 177 x 26 x 45 mm

Pneumatic cylinders, variant cylinders, round cylinders, double FESTO DSNU-25-65-PPV-A 14322 stroke: 65 mm piston diameter: Ø 25 mm rod diameter: Ø 10 mm rod thread: M10 x 1,25, Length: 20 mm pmax: 10 bar M22 x 1.5, Length: 20 mm Mounting socket: Ø 8 mm, Length: 16 mm New ! Dimensions: 207 x 27 x 27 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-400-PPV-A 163315 1376429 piston diameter: Ø 32 mm stroke: 400 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 625 x 45 x 100 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-200-PPV-A 163312 1376429 piston diameter: Ø 32 mm stroke: 200 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, tested ! Dimensions: 415 x 45 x 105 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DNC-32-600-PPV-A 163304 1463254 piston diameter: Ø 32 mm stroke: 600 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar with flexo coupling: FK-M10X1,25 ( 6140 ) used, checked ! Dimensions: 750 x 45 x 72 mm

Compact cylinders, pneumatic cylinders, double-acting FESTO DZH-32-600-PPV-A 14040 piston diameter: Ø 32 mm stroke: 600 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm max. 10 bar used, tested ! Dimensions: 750 x 35 x 75 mm

linear actuator FESTO DGP-25-950-PPV-A-B 161780 stroke: 950 mm piston diameter: Ø 25 mm Slide: 105 x 19 mm pmax: 8 bar used, tested ! Dimensions: 1220 x 70 x 70 mm

Pneumatic cylinder, variant cylinder, round cylinder, double-acting, 2 pcs FESTO DSNU-20-250-PPV-A 19243 < br />stroke: 250 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm rod thread: M8 x 1,25, Length: 20 mm pmax: 10 bar Mounting thread: M22 x 1.5, length: 20 mm mounting bushing: Ø 8 mm, length: 16 mm used, tested ! Dimensions (single cylinder): 385 x 27 x 54 mm Dimensions (packaging): 390 x 70 x 60 mm

12 Festo pneumatic cylinders, type: DNC-32-120-PPV-A-12K8-R3, maximum pressure: 12 bar, maximum stroke: 120 mm.

Measuring and marking plate cast steel cast strongly ribbed with mounting angle 565 mm high Year of construction approx. 1985 Length: 1200 mm Width: 800 mm Thickness: 35 /150 mm Working height: 1030 mm Weight approx. 550 kg with metal base very good surface; used

Straightening and welding plate cast steel cast strongly ribbed Length 1200 mm Width 800 mm Thickness 150 mm Working height 1050 mm Panel thickness approx. 30 mm continuous - simple metal substructure Weight 270 kg good condition; used

Measuring and marking plate cast steel cast strongly ribbed STIEFELMAYER Masch. No. 8530979 Year of construction approx. 1989 Length 5000 mm Width 2000 mm Thickness 350 mm Working height 690 mm Plate thickness 50 mm continuous - 15 pieces height-adjustable feet - very precise and stable longitudinal guides, screwed laterally to the plate Space requirement L x W x H 5000 x 2120 x 400 mm Weight approx. 7500 kg good surface; used

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Brand New UBE Squeeze Casting Machine Still in crates never installed. Specifications: Make: UBE Model: VSC 700 YOM: 2016 700 metric ton Vertical Cold chamber/High-pressure Squeeze Cast machine Fully Loaded Daylight 1.350 mm Die Closing force 7.000 KN ( 17.5 MPA) Column Internal Dimensions ( Vertical x Horizontal) 940 x 770 mm Column Diameter 180 mm Die Stroke 750 mm Die opening Force 352 KN ( 17.5 MPA) Injection Force ( Max-Min) 999 to 480 KN Injection Stroke ( Including Docking Stroke) 872 mm Sleeve Docking Stroke 170 mm Plunger Tip Diameter ( outer tip) 135 mm Plunger Tip Diameter ( Inner Tip) 60 mm Injection Position Machine Center Injection Speed Max. 110 mm/ sec Ejection Force 196 KN (17.5 MPA) Ejection Stroke 40 mm Distance from Die Mounting surface to Ejection Plate 190 mm Number of Valves 1 moveable and 2 fixed Motor for Hydraulic pump 480V ...

Two identical three-phase cast resin transformers are available. Frequency: 50 Hz, insulation class: F / F. Rated power/voltage/current: 4509kVA/10000V/260.3A. Dimensions X/Y/Z: 2385mm/1850mm/2682mm, weight: 11200kg. On-site inspection is possible.

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Base made of solid wood Weight approx. 950 kg good surface; used

Straightening and welding plate cast steel strongly ribbed Length 3050 mm Width 2000 mm Thickness 300 mm Plate thickness approx. 55 mm continuous Weight approx. 4.5 ton. good condition; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1600 mm Thickness 110 mm Working height 600 mm Plate thickness 30 mm continuous Weight approx. 1000 kg Good condition, good surface; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 250 mm Working height 820 mm Panel thickness 30 mm Continuous height-adjustable metal base Weight approx. 400 kg Surface rusted; used

Measuring and marking plate cast steel strongly ribbed Length 2000 mm Width 1000 mm Thickness 100 mm Working height 745 mm Plate thickness 40 mm continuous - stable metal substructure Weight approx. 800 kg good condition; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 1000 mm Thickness 230 mm Working height 970 mm Top thickness 38 mm continuous - Metal base Weight 450 kg; used

Straightening and welding plate, cast strongly ribbed Length 1000 mm Width 750 mm Thickness 110 mm Working height 810 mm Top thickness without ribs 34 mm - 3 pieces height-adjustable support points between table and metal base - simple metal base Weight approx. 280 kg; used

Straightening and welding plate cast steel strongly ribbed Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm continuous - Center hole 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes 27 mm Weight approx. 2.5 to. good condition Former press table; used

Measuring and marking plate cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 8530979 Year of construction approx. 1989 Length 3000 mm Width 1500 mm Thickness 360 mm Working height 690 mm Plate thickness 70 mm continuously - laterally machined at a 90 angle surface 3000 x 360 mm - 6 pieces height-adjustable feet - plus 1 piece measuring arm mechanically and electrically without function the measuring range is approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm Space requirement L x W x H 3000 x 2000 x 2500 mm Weight approx. 5000 kg very good surface; used

Straightening and welding plate SIEGFRIED WEYRAUCH Gemmingen cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjustment screws for aligning the plate Weight 370 kg good surface; used

Measuring and marking plate cast steel strongly ribbed Length 1000 mm Width 1000 mm Thickness 54/225 mm Working height approx. 800 mm - 4 feet with adjustment screws for aligning the plate Weight 390 kg good surface; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1000 mm Thickness 240 mm Working height 850 mm Plate thickness approx. 30 mm continuous - 5 pieces height-adjustable feet Weight approx. 1000 kg good surface; used

Measuring and marking plate, measuring table cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 22890285 Year of construction 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm- manually movable with measuring arm , measuring range X=1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - laterally machined area at 90 angle 1500 x 350 mm- 5 pieces height-adjustable feet Space requirement L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface; used

Straightening and welding plate cast steel strongly ribbed Length 1985 mm Width 1000 mm Thickness with ribs 220 mm Working height 860 mm Plate thickness approx. 35 mm continuously - 4 pieces height-adjustable feet Weight 1050 kg; used

Joint connectors made of cast iron PAGUS

Measuring and marking plate, measuring table Cast steel strongly ribbed STIEFELMAYER of a measuring or scribing machine with hand-held measuring arm Year of construction 1985 Length 2000 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - manually movable with measuring arm , measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm - with 3-axis digital display Grundig MZ 1030 - machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces height-adjustable feet Space requirements L x W x H 2000 x 1500 x 2500 mm Weight approx. 2600 kg good condition; used

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gray cast iron -Number: 7x bearings available -Price: per piece -Dimensions: 92/70/H85 mm -Weight: 2.0 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 35 mm shaft -made of: gray cast iron -Number: 12x stock available -Price: per piece -Dimensions: 70/52/H75 mm -Weight: 1.2 kg/piece