We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,575 used machines on RESALE, but how to find them? Machine Search
used
The line has undergone commissioning and is in good condition. Not used. It is under conservation. Rod diameter from 5mm to 12mm; Mesh width 800mm-2500mm; The pitch between the axes of the transverse rods (multiples of 50mm) is from 50mm to 300mm; The pitch between the longitudinal bars is from 100mm to 300mm; Welding speed of cross bars is 55-80 cycles/min. n Line composition: Main machine - 1 piece; Chiller - 1 piece; Compressor - 1 pc.; Dryer - 1 pc.; Receiver 1000 liters - 1 piece; Operator control panel (in Russian) - 1 pc. Optional equipment: The machine cuts correctly. Rod diameter from 5mm to 12mm; The length of the rods is 6 m; Speed 130m/mi. Specifications Power supply: alternating three-phase current 380V 50 Hz; Cascade welding mode; Transformer power 150 kW - 12sh; Peak power 315-630 kW; Nominal pressure, air flow 06.-10.0MPA, 130m3; Supply voltage 3 ph ...
used
Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-1, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm:105 Spray weight gr: 4137 Spray volume cc: 4546 spray pressure possible: 1778 Dimensions and weights Machine weight Kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64
used
Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-2, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm: 115 spray weight gr: 4962 Spray volume cc: 5453 spray pressure to be: 1482 Dimensions and weights Dimensions LxBxH m: 12.16 x 3.49 x 2.58 Machine Weight kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64
used
Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 1.810 x 1.610 mm - Screw diameter: 140 mm - Shot weight max: 8.630 (PE) g - Shot weight max: 10.880 (PS) g - Injection rate: 1.510 cm?/s - Injection volume: 11.820 cm? - Screw speed: 90 / 90 / 75 rpm - Screw L/D ratio: n/a - Nozzle stroke / force max.: 600 mm / kN - Nozzle stroke max: 350 mm - Clamping force: 25.000 kN - Mould opening stroke max: 2.700 mm - Mould height max: 1.700 mm - Mould height min: 900 mm - Daylight between platens max: 3.600 mm - Platen size (h x v): 2.480 x 2.250 mm - Cascades / Sequential valve gates: n/a - Heating zones: n/a - Ejector force: 60 kN - Control: HICOM-5000 - Core pulls: n/a - Oil tank capacity: 3.800 l - Operating hours: 635 - Power: installed max: 85 + 55 +55 +55 +11 kW - Dimensions (long x wide x ...
used
Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone
Qty. 1 Second-hand basket transport and storage system Mfc.: Mannesmann Built: 1994 Storage capacity: 154 baskets Transport system for linking the drawing cascades with following drawing machines to storage of tube coils in baskets - warehouse management system.
used
Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone
used
- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100
used
Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm
used
ROBOT ENGEL ERC65 X-axis 800 (EUROMAP standar) Y-axis 1400 Z-axis: 2840 A-axis C-axis 2 x vacuum 3 x gripper - Screw diameter: 60 mm - Shot weight max: 650 g - Injection volume: 769 cm? - Screw L/D ratio: 23 - Ejector stroke / force max.: 250 / mm / kN - Clamping force: 3.500 kN - Mould opening stroke max: 1.300 mm - Mould height max: 920 mm - Mould height min: 380 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.060 x 1.095 mm - Cascades / Sequential valve gates: 6 - Distance between tie-bars (h x v): 710 x 710 mm - Control: MC 4 - Core pulls: 5 - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.500 x 2.100 x 2.380 mm - Weight: 15.500 kg
used
Offer: Battenfeld HM 400/2250/750S Year/year 2011 ps: new screw + cylinder 65mm/ new screw+barrel 65mm Production year: 2011 Control: Unilog B6S Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access ...
used
clamping force: 4200 kN injection volume: 1212 /292 cm³ screw diameter: 70 /15 mm platen size: 1200 x 1100 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic i ...
used
Overview The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited. Machines overview Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1 Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch Punching of aluminum caps from metal tape rolls Manufacturer: Fords Model: 320 MD Press Year of manufacture: 2007 Leak tester Testing the ...
used
Closing unit Clamping force [kN] 6500 Clearance between columns (hxv) [mm] 1025/930 Min./max. mold height [mm] 450/950 Maximum opening width [mm] 1800 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 2480 Injection weight [g] 2254 Electrical and hydraulic equipment Rated power of the pump motor [kW] 55 Heater power [kW] 62 Barrier Screw cascades: 4 pneumatic nozzles air valves: 2 valves