cas used for sale

Casadei Xenia 60 format saw sell format saw with scorer and tilting blade little used Year of manufacture: 2018

The scope of delivery includes: 01x Bale clamp, used Manufacturer: Cascade Catalog number: 28G32759R1 Serial Number: ALE491356-1R1 Working pressure max.: 100 bar Year of construction: 2006 Nominal load capacity: 1,200 kg Load centre of gravity: 500 mm Own centre of gravity: 286 mm Weight | Pcs.: 444 kg Currently in stock Available: approx. 01 pcs Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

This CASADEI LIBRA 35 wide belt sander machine wa made in the year 2019 in Italy. The machine has a working width of 1100 mm, working height of 4 - 170 mm, belt width of 1115 mm and a belt length of 1900 mm.

Number of working hours: . h output: 80 PS power fuel: Diesel Weight: 2800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with various cutters. Incl manifold You are responsible for dismantling and transporting this lot. There are no tools available.

Sanding height max. 3-150mm ; Throughput: 6-12m/min

Length: 1000mm, width: 1200mm, height: 2500mm, the machine has not been run for some time, an inspection is possible.

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Cutting length 4500 mm Pliers slide depth 4500 mm Saw blade projection 95 mm Gate valve 1-60 m/min Motor 9 kw Scoring motor 0.75 KW/1PS Machine cuts in format4 sides

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

sliding carriage length: 3200 mm; cutting width with rip fence: 1270 mm; Max. cross cut width left from saw blade: 3200 mm; Max. cutting height 90°: 140 mm; Max. cutting height 45°: 99 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 400 mm; saw blade speed: 3000 - 4000 - 5000 U/min; motor power: 7,0 kW; motor brake: yes / automatically; suction connection: 80 mm / 120 mm; machine length: 3600 mm; machine width: 1900 mm; weight: 1600 kg; With swiveling 400 mm saw blade and preheating device. M version with motorized height and angle adjustment of the saw blade. - Sturdy cast steel construction guarantees precision, smooth running and durability - Smooth-runn ...

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

SPECIFICATIONS: Workbench: 1100 x 900 mm Manual adjustment Installed power: 9 kW Engine brake Equipment: 01 Drive (0.37 kW)

Table size 450 x 210 mm Longitudinal travel 300 mm Cross travel 200 mm Vertical travel 370 mm Equipped with: Digital Coolant

CASE PUMA CVX 195 TRACTOR : POWER : 195 HP new in 2010, was recently submitted to an overall service for maintenance, in very, very nice condition, clean NEW BKT rear and front tyres : 620/70/42 and 540/65/28 40km speed air conditionning continuously varialble speed Front linkage 3.9 tonne and coming along frontal 1.6 tonne weight DELIVERY ALSO POSSIBLE Les informations détaillées sont disponibles en Français sur demande Expédition possible

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, highly machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy Powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packing unit: 3.0 kg New ! Dimensions ( packaging ): 85 x 85 x 230 mm

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Metal powder alloy CASTOLIN ROTOTEC EXOTEC 29904 exothermic reacting metal powder alloy as primer for all ROTOTEC applications Quantity: 1kg New ! Dimensions: 90 x 90 x 130 mm

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

Casadei R51H3 thicknesser Working width 510 mm Working height 300 mm 5.5kw main motor 4-knife planing roller Traditional knives Planer roller with brake, CE Standard Work table with 4 supports One motorized roller is installed in the table to support the feed of the machine Feed rate adjustable on the gearbox in the range of 5/10/15/20 m/min

Hydraulic pump, oil pump, gear pump -Manufacturer: Casappa, hydraulic pump -Type: PLP30.27DO-83E3-LGF/GE-N -Shaft: Ø 19 - 22 mm M14 x 1.5 - Connection: G3/4 , G1 -Dimensions: 175/125/H155 mm -Weight: 9kg

Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 120 x 50 mm -Recording: see technical drawing in the photos -Transport dimensions: 1380/680/H140 mm -Weight: 176 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve -Manufacturer: Castel, collector valve/valve membrane, unused in original packaging -Type: 6110/22 -Price: per piece -Number: 5 piece -Dimension box: 100/50/H40 mm -Weight: 0.1 kg/piece

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused original packaging -Type: 6590 / M12 -Connections: 12 mm ODS -Dimension box: 130/85 / H40 mm -Weight: 0.3 kg.

Stack electrode 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Stick electrodes 3.2 x 350 -Type: CP 35078 D -Price: per package -Number: 3 packages available -Weight per package: 4.6 kg

Sideshift, side lift, forklift sign -Load capacity: 2000 kg -Sign width: 1500 mm -Sign height: 400 mm -Upport height: 400 mm -Dimensions: 1500/480/H90 mm -Weight: 89 kg

Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 450/210/H200 mm -Weight: 21.2 kg

Code: 0184 Brand: CASATI MACCHINE Model: Z 2000 - CE Standard Thread splicer for veneer for high production - CE standard Technical data: Arm lenght mm 1200 Veneer thickness mm 0,3-3 Feed speed mt/min 10/50 Stepless change of heater, oscillation angular speed, independent of the linear feeding speed Accurate adjustment of the feeding friction pressure Adjustment of the starting point and stop point Thread heating by electric resistance Zig-zag height adjustment Automatic breaking of the thread All functions are operated on the control panel Total electric power Kw 1,5 Overall dimensions: mm 2050 x 600 x 1400 h Weight kg 450