calfort 5 used for sale

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

Hydraulic power unit for mobile clinching pliers or mobile former ECKOLD type HA 500 / 2Fabr. No. 737 / 783 Year of construction 1991Hydraulic power unit type HA 500 / 2Operating pressure 50 - 500 bar adjustableFlow rate 2.6 l/minTank capacity 16 litresEngine power (hydraulic) 3 kWNead power 380 Volts, 50 Hz.Control voltage 24 Volts, DC pressure line with screw coupling- With solenoid valve HAWE GS 2-2- mobile on 4 swivel castorsWeight without hydraulic oil 125 kggood condition; used

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

2025 BIG backhoe bucket 50cm with MS03 Symblock attachment, Technical specifications:, - Weight: 93 kg, - Recording width: 50 cm, - Contents: 103 liters, - CAT 3 - suitable for 2.8 - 3.9 t excavators

2025 BIG backhoe bucket 50cm with OQ45 attachment, Technical specifications:, - Weight: 178 kg, - Recording width: 50 cm, - Contents: 198 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

BIG hook lift container with 5000 l tank

2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...

Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, total installed power 406 kw, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

Key data: 5500 mm, 1127 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1127 g Clamping force: 5500 kN Screw diameter: 70 mm Stroke volume: 1239 cm³ Injection weight in polystyrene: 1127 g/hp Injection pressure: 1,990 bar Clamping force: 550 t Lights Tie bar spacing H x V: 920 x 830 mm Tool installation height - min.: 350 mm Opening distance: 750/1300 mm Microprocessor control: KEBA 2880 Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kW Total connected load: 95.4 kW Total weight: 21,000 kg Total size: 7.5 x 2.5 x 2.6 m Payment terms: 100 % before taking over the machine, purely net

was in operation for conveying cereals and salt (silo filling),, Screw diameter: 150 mm,, Emission height: approx. 3,000 mm., Dimensions / weight: LxWxH: 4.500x1.085x2.970mm

PELLIZZOLI HEAVY DUTY GRANULATOR, Heavy duty granulator for rubber and plastics, sturdy machine, very well constructed, 1.500 mm.wide rotor, Ø 800 mm - open rotor, powerful 132 kw drive, n.15 rotating new knives 50 mm.long + spare set, n.2 screens: holes 50 mm + 8 mm., machine prepared to be connected to a chiller to perform a thorough cooling, material sucking unit + dust sucking unit., This machine was new in 2005 but it has been working only 3 months on a pilot project., The machine is offered reconditoned, Complete with CE compliance, electrical drawings, manual., installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.500 mm. (59), conditions: fully reconditioned, type: heavy duty - open rotor for rubber and plastics

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width  ...

Pillar jib crane, indoor crane, workplace crane -Load capacity: 500 kg -with chain hoist: SWF type 50/F -Year of construction: 1980 -Main stroke: 4.5 m/min -Fine stroke: 0.75 m/min -Projection: 3000 mm -Total height: 3760 mm -Hook height: 2940 mm -Swivel range: 360° -Transport dimensions: 3490/1100/H1400 mm -Own weight: 748 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Gefran, Linear Wegaufnehmer -Type: PK M 575 L XL0191 -Measured length: 575 mm -Dimensions: 770/40 / H60 mm -Weight: 1.2 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Ziehl-Abegg, axial fan axial fan suction fan -Type: ... 500-4-4ADsp -Power: 0.42 kW / 1360/1050 rpm -Fan: Ø 500 mm -Quantity: 1x fans available -Price per piece -Total dimensions: 860/850/H180 mm -Weight: 21 kg/pc.

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 105 mm -Protection rating: IP54 -Dimensions: 360/250/H200 mm -Weight: 14.8 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 360/250/H190 mm -Weight: 14.0 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, electric geared motor without gearbox -Type SA37 DRS71S4/MM07 -Drive motor: with frequency converter MM07D-503-00 -Motor speed 2900/597 rpm -Power: 0.55/0.055 kW -Shaft: Ø 10 -14 mm, spur gear see photos -Protection rating: IP54 -Dimensions: 240/186/H245 mm -Weight: 8.4 kg

Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Bra ...

Used Nissei blow molding machine ASB 50MB 2010Technical Specifications & Performance DataThis Nissei ASB ASB-50MB is a one-stage biaxial orientation stretch blow molding machine designed for precision PET bottle production. As a compact rotary indexing platform, it integrates injection and blow molding in a single cycle, ensuring excellent neck finish accuracy and consistent wall distribution. This second hand machine offers reliable output for beverage production and industrial packaging projects seeking a proven, cost-effective solution.Manufacturer: Nissei ASB engineeringModel: ASB-50MBManufacturing year: 2010Process: One-stage ISBM (injection-stretch-blow)Production speed: approx. 1000 bph with 4 cavitiesCavities: current setup 4 (machine supports 1–6 cavities depending on article)Bottle formats: 40 ml to 750 mlContainer type: PET bottlesElectrical data (plate): 400 V AC heater, ...

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

AGFA knife for SelectSet 5000. Including knife holder and dental equipment. Available now

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

AGFA drive motor of the knife for SelectSet 5000. Including dental equipment. Available now

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

4 + 4 bags Sniffer Output Available: Immediately

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

AT-Motor Scania Typ=DC12 Pumpe-Düse komplett ohne Anlasser+Lichtmaschine. 1 Jahr Garantie,337KW bei 1.800 U/min.Für Notstrom+BHKW Anwendungen. info@miw-zeven.de