We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,574 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
total 45 plates; Film faced; 6166
used
total 45 plates; Film faced; 6166
used
total 45 plates; Film faced; 6166
used
Frees blok; freesblok; freesmachine; uitwendige maat 240 mm; hoogte 32 mm; asgat 40 mm; v.v. wisselmes
used
total 45 plates; Film faced; 6166
used
total 45 plates; Film faced; 6166
new
Weighing unit with 24 weighing heads for very precise weighing, with 1 Liter volume each. Special design for weighing 4 or 6 different products simultaneously and then merging them or to weigh one product in high speed. Optional for extra charge: CAN bus protocol for higher speed. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (with 4 - 6 products simultaneously) | weight range per product for 6 products: 1-200g | accuracy +/- 0.5-1.5g | PLC controlled, operating via 10 Touchscreen (operation menu in English) | stainless steel 304 | IP65 | 220V/2,5kW, 15A | machine dimensions: L2630xW1700xH1815mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...
new
Weighing unit with 24 weighing heads for very precise weighing, with 0.8 Liter volume each. Special design to mix up to four different products or to weigh one product in high speed. - Specifications: max. speed of the machine in neutral: 220 cycles/minute (when one product is processed, and depending on product). Weighing range 2-500g, Accuracy +/-1g, 10.4 inch Touchscreen (operation menu in three languages). - Stainless steel, IP64 (upgrade to IP65 possible, for additional costs) 220V/4kW, L2136xW1456xH1433mm, 1100kg. Deviations from the sample image are possible. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...
new
Weighing unit with 24 (2x12) weighing heads for very precise weigh checking, with 1.0-Liter volume each. Special design to mix two different products or to weigh one product in high speed - Specifications: max. speed of the machine in neutral: 150 (or 2x60) cycles/minute | weighing range: 10-1000g | accuracy: +/-0.1-2.0g | touchscreen (large version) operation | stainless steel | 220V, 3kW | L2176xW1456xH1483 | 1000/1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - ...
used
There are three metal band saws available, connected load: 1.1kW, weight: 170kg.
used
Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled.
used
Rotational speed: 1800/3600/min, an inspection is possible.
used
X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation.
used
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packagin ...
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...
used
Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly.
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...
used
Transport width: 4800mm, format: 0.25/0.5/0.7/1l, output: 38,000 bottles/h, with documentation and accessories.
used
Max. piece dimensions: 250x240mm, connected load: 5.8kW, length: 1925mm, width: 950mm, height: 1420mm, weight: 450kg, including documentation, display is defective.
used
Operating pressure: 10-20bar, weight: 1.33t, with buffer storage, pumps and external heat exchanger.
used
Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.
used
There are two identical robots available, operational hours counter: 69,335h, including controls.
used
Inclination: 7°, compressed air supply: 6.5bar, connected load: 8.5kW, length: 4170mm, width: 2990mm, height: 3330mm, weight: 2.8t, including documentation.
used
With window station, printing units, outside and inside print, gumming reel splicer, hotmelt and window splicer,
used
Drill rotational speed: 200-2500/min, drill diameter: 3-8mm, drill length: 30-80mm, max. stacking height: 40mm, connected load: 4.6kW, with documentation.
used
This is a machine for the production of mailing bags and envelopes, number of colors: 2, max. output: 500/min, max. paper roll diameter: 1500mm, connected load: 73kW, length: 28,280mm, width: 2500mm, height: 3100m, with documentation, without window station, an inspection on site is possible, the machine is located in Western France.
used
Max. load: 240kg, weight: 1.267t, with controls, was maintained regularly, an inspection is possible.
used
Size: 609 x 767 mm Equipments: Machine complete with PC, RIP, etc.
used
Aviteq feed channel Brand: Aviteq Type: OA 2490/900 ASA Length 2490 mm - Width 900 mm Drive by means of magnet vibrator Incl.: control apparatus & springs.
used
Kneading machine Boku Type: AK 240 Year of construction: 1996 / 2004 Dough quantity: 240 kg additional 2 boilers Manual control 2 speed automatic Mechanical boiler locking Weight: 0.7 t per kneader Condition: from service, electrics and mechanics contra.
used
Screening machine Binder 24/60-1 Brand: Binder Type: KS 2400/6 Screen area : 6000 x 2400 mm – 1 decker Screen opening upper deck: [] 8 mm Screen opening lower deck: [] 4 mm Drive: Electric motor 18.5 kW
used
The scope of delivery includes: 01x Kolli flow rack frame, used Manufacturer: Tegometall Type: CI Material color: white / galvanized Material color (rolls): white for truss width: approx. 2,800 mm Total width: approx. 2,780 mm Total depth: approx. 2,450 mm Total height: approx. 110 mm Further data on the flow rack frame: Number of roller strips per segment: 18 pieces Roller strip spacing: approx. 130 mm Tray width: approx. 440 mm
used
DORRIES VCE 2400/200 MC/FC 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Plate dia.: 2000 mm Max. turning dia.: 2520 mm Max. turning height: 1990 mm Ram travel: 1500 mm Main drive motor: 75 kW Live spindle: Spindle rotations: 45 - 1500 1/min Spindle motor: 15kW Max. workpiece weight: 12 Ton Tool magazine: 16(turning)+16 (drilling) Station Automatic Tool Changer Auto tool probe Auto detail probe Pallet changer with 3 pallets (turning plates) Table rotation (2 ranges): 1. 2,5 – 70 2. 10-280 Machine space required: 11000 x 11000 mm Video before dismatling
used
Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse
used
Stock number: 3772 WELDING ROBOT Manufacturer: ABB ROBOTIC, Type: IRB 2400 L- 6 axis Machinen NR.: 24-12947, YOC: 1999 Specifications: ROBOT TYPE ABB IRB2400 x 2 Ansahl Aschsen 6 pcs. weight 1-5 kg Working range 3421 mm Control abb Fabr. Accessories Manipulator Model IRBP 250 K Rotary table 250 mm
new
Manufacturer: SKF Type: 24160C CK 30 /W33 In stock: 6 piece(s) Weight: 164 kg/piece
used
Lifting tipper, Fabr. Diosna, HK 240
used
x-travel: 6200 mm y-travel: 1500 mm z-travel: 508 mm Control: Mazatrol type: M 32 workpiece height: 708 mm Tool changer: 60 spindle taper ISO: 50 table surface area: 6200x750 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
see PDF attached
used
Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul
used
Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
used
Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new (second choice) Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse for panel thickness: 22 mm Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting
used
Infinitely variable adjustment of belt tension, 30mm paper-coated PE tape, automatic – via photocell or manual activation
used
KRAUSS MAFFEI KM3200/24500 (3200 ton) injection molding machines for bumper. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)
used
The scope of delivery includes: 01x collision guardrail, used Manufacturer. Feralco For double rack row: 2,400 mm Total height: approx. 400 mm Total depth: approx. 340 mm Total weight: approx. 29 kg | Pcs. Consisting of each: 02x rectangular tubes, used Total length: approx. 2.490/ 2.415 mm Material color: yellow Profile abm.: approx. 80 x 40 mm Material thickness: approx. 2.0 mm 02x U-collision protection corners, used Material colour: yellow/black Total height: approx. 400 mm Total depth: approx. 300 mm Total width: approx. 170 mm Internal width: approx. 152 mm Material thickness: approx. 4.0 mm 08x screws 08x nuts 16x washers
used
Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW
used
Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009
used
Viereck Brötchenalage Lippelt Rustica 240 / 220 - square bread roll Lippelt - Model: Rustica 240 / 220 -composed of - with dough pre-portioner (retrofitted in 2017) - with funnel tape - with dough dividing machine - with sprinkling unit - with settling tape - Year of construction 2006 (revised in 2017 and new dough funnels added)
used
STUFFER + PORTIONER WITH SAUSAGE HANGER, HANDTMANN Technical description: Stuffer type: Handtmann VF100B Portioner type: Handtmann AL 242-01 Hanger type: Handtmann 242-16 Power supply: 380-440 V / 50-60Hz https://youtu.be/ZxAf2uRbDf4