bx 24 used for sale

Machine complete with PC, RIP, etc.

Used potato starch dewatering station 1000 T / day, made in Spomasz Wronki. New 1970s. The set includes 5 vacuum traps with pumps and motors, a bathtub and a collecting conveyor with a new conveyor belt with a certificate for food purposes, purchased in 2020. It worked until January 2021.

No. 3487 & 3489: 1 gebr. Additional table (suitable for rigid table type 2710 ) for lid - slanted bed models FP 2/3 L/LV FP 41/42 Fabr. DECKEL, type 2410, with weight approx. 180 kg Arb.-Ber.: Clamping surface 1200 x 370 mm,

Diosna lift tipper HK 240 for spiral and lifting kneaders from 1971

industrial robot ABB IRB 2400/16 Type B - M2004, Y.O.M. 2005 - Load capacity: 16 kg - Range working radius: 1550 mm - Control module: IRC5 M2004 - Robot version: IRB 2400/16 Type B - M2004 - Teach Panel: FlexPendant - Remote I/O Unit: DSQC 350A - Total power: 1 kW - Mash. Weight: 800 kg - Space requirement (W x D x H): 0.73 x 0.6 x 1.6 m - Condition: very good - Engine hours: 37095 h details well-maintained robot, ready to use accessories Documentation, all cables

-Boiler with car for spiral kneader Diosna W 240 A -with handle -with stainless steel boiler -Boiler diameter 96cm outside

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

high-quality front foils for industrial use for IPC10.8 104168006 and IPC10.7 104168010

Vertical 4-side sealing sachet machine suitable for dosing liquids. Machine comes without dosing unit.

Double cone mixer,stainless steel,gearmotor

We offer you here a used roll bar of the manufacturer Bito for sale. Included in delivery are: 01x roll strip, used Manufacturer: Bito Material color frame: galvanized Material color rolls: similar. Cream Segment length: approx. 2,460 mm Segment width: approx. 38 mm Roll width: approx. 25 mm Pitch: approx. 25 mm Roll diameter: approx. 20 mm Frame height: approx. 25 mm Material rolls: plastic Shipping costs on request

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 466 kg Siegmund authorized dealer all articles available! Product description The table Professional 750 2400x1200x100 mm has a hole arrangement in 50 mm Grid on the table top and a parallel hole arrangement in a 25 mm grid the sides. The holes have a diameter of 16 mm. The table has one Material thickness of approx. 11.5-13 mm and is made from high quality steel S355J2 + N manufactured. Grid lines at a distance of 50 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment The data ...

table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 537 kg The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N angle + 1x 163999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm capacity 90 degrees: square: 200 x 200 mm capacity 90 degrees: flat: 285 x 200 mm capacity 45 degrees: flat: 200 x 200 mm capacity 45 degrees: round: 200 mm capacity 60 degrees: round: 130 mm capacity 60 degrees: square: 130 x 140 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 37 - 74 m/min work height max.: 940 mm total power requirement: 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1.250 x 1.500 x 1.700 mm Furnishing: - Miter cuts left 60 ° + 45 ° right - cutting speed 37 + 74 m / min. - Ball-bearing turntable for easy miter adjustment (durable) - Machine base with automatic cooling - Electrical display and monitoring of the machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm dimensions of saw-band: 2730 x 27 x 0,9 mm table height: 920 mm cutting speed: 35 + 70 m/min : 240 mm stroke back stop: 230 mm cross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm : 130 mm : 130x160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,26 t dimensions of the machine ca.: 0,9 x 1,6 x 1,74 m WMT promotional price ! 2899, -EUR • miter left 60 ° • Quick-action vice with quick-release device a. • Quick release lever for easy handling • Frame and gearbox in one piece, very quiet cut and very low vibration • Electrical monitoring of belt tension and belt break, saw blade cover. • saw blade guide made of carbide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw fram ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 37 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 2900x2300x2150 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 16 l/min Capacity: - Watt conveying height: 2,5 total power requirement: 60 Watt voltage: 24 V depth: kompl. mm 0: 11,5 mm A submersible pump that has been developed to be completely in the cooling fluid To be submerged. It is mainly used in small machines with Low coolant use (for example, sawing and drilling machines). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Proportional valve, 4WRE 10 M64-14/24K4/M, Bosch Rexroth, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with few traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

We offer 18 pieces Peri Trio 330 x 240 elements refurbished. Newly covered with original Peri Finply formwork. Frame cleaned, primed and painted with zinc phosphate coating. 50% discount on the new value of 3683,00€ = 1841,50€/ piece. Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

HANDTMANN PVLH 226-01 + 242-16 ID.NO. 2133 Handtmann PVLH 226-01 + 242-16 links + suspension year mod 2008 directly taken out of production. Dimensions 500 x 90 cm H 150 cm.

GAS FIRED STEAM BOILER : MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

Diosna Wendelkneter Type: W240 A Spiral kneader extendable for max. 240 kg dough or for max. 150 kg flour 2 speeds slow and fast 2 automatic timers 2 spiral spiral stainless steel with plier lock Boiler is driven by friction wheel drive Head hydraulically lifting and lowering with switch box with 2 stainless steel boilers Vat capacity 355 litres Machine was completely overhauled in 2017 and was in operation for 3 years Height: 180cm Width: 110cm Depth: 150cm

Diosna vat wagon with boiler revised and repainted Kneading boiler vat for spiral kneader Diosna W 240 A Stainless steel boilers with carrying handle for a maximum of 150 kg flour for max. 240 kg dough Revised, boiler finely ground and polished, trolley repainted

Boku Spiral Kneader Type: SK 240 AK extendable spiral kneader for max. 240 kg dough with automatic timers digital display 2 speeds slow and fast Spiral made of stainless steel with 2 stainless steel boilers with flour dust cover Completely overhauled in 2017 Extra boilers available at extra cost. Approx. 20 boilers in stock

Spiral kneader Diosna Type: SP 240 AF Spiral kneader extendable for max. 240 kg dough or for max. 150 kg flour 2 speeds slow and fast 2 automatic timers with program memory Spiral made of stainless steel with plier lock Boiler is driven by friction wheel drive Head hydraulically lifting and lowering Film control with 2 stainless steel boilers Vat capacity 355 litres On request and surcharge also in a completely overhauled and newly painted condition

Diosna Spiral Kneader Type: SP 240 E with soil emptying automatic dough emptying Stainless steel boiler and spiral 2 timers with flour dust cover New belts on the conveyor belt for 150 kg flour or 240 kg dough with boiler shearing repainted

 Spiral Kneader Boku Kettle ALUHeducator : BokuType : SK 240 ASCS For 160 kg flour , 240 kg doughWe have 5 pieces in stockDetails see picture

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

platewriter Manufacturer: glunz&jensen Model: ICTP 2400 Pc + rip included year: 2010 Availability: in 2 weeks Defects: no Price: on request

Puller trolley with 10 pullersStainless steel trolleyPullers made of ALU without cloths On request, we can get new clothsOn roller trolley dimensions: W: 248cm D: 64cm H: 192cmPuller dimensions: W: 240cm D: 61cmFor up to 200cm deep ovenCloth dimensions 4400x580mm3 pieces in stockSee pictureDo we have different size pullers in stock

Used exhaust gas heat exchanger Aprovis, functional; Price net EXW

Diosna vat wagon with boiler Kneading boiler vat for spiral kneader Diosna W 240 A Stainless steel boilers with carrying handle for a maximum of 150 kg flour for max. 240 kg dough

T-slot Table 3500 x 2450 x 610 mm Thickness: 610 mm Length: 3500 mm Large: 2450 mm With (1) -- Without (2) nuts: 7 t-slots

Flail mulcher for three-point attachment (rear or front) Cat. II, PTO drive 540 rpm, gearbox with freewheel, hydraulic side displacement approx. 350 mm, working width 240 cm, 34 hammer mallets. Further flail mulchers, also laying mowers and other mowing technology in stock - see example photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Stock # U2422-9 Used mobile vertical stainless steel AISI 316L aseptic reactor with a total capacity of 240 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Reactor has a working volume of 160 l and is designed to operate at pressures ranging from -1 to 3 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 16 l and is designed to operate at pressures ranging from 0 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 680 mm, length of straight wall line 530 mm. Reacto has open hinged dished top, bolted with clamps. The top equipped with an inspection manway with an internal diameter of 250 mm and 7 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central ou ...

Magnet coil, electromagnet, pull magnet -Type: MSN1G-24V -Connection: 24 V DC 2.5 W. -Price: per piece -Number: 14x available -Minimum order: 3 pieces -Weight: 0.1 kg