buy used for sale

Crane traverse, Wewira, 3 to. –used-: Price from location: 6.500.-€ (net)! Manufacturer: Wewira Type: Compensating truss Year of construction: 2022 6.000mm 6 hooks Load capacity: 3,000kg Original price, 7.800.-€ (net) Condition: very good - basically unused! – classic bad buy! It's just a bit dusty at the moment! Available: now Location: 79206 Breisach am Rhein

Coffee roasting oven: for sale production line - 2 furnaces by the French company SASA Samiac. Equipment still used in production, put up for sale due to the purchased larger furnace. Fill each kiln 60 kg. Possibility to buy one furnace.

Pausch X-ray imaging workstation Compact CS 2000 with the following system components: Generator Editor Hfe 501 Tube Siemens SV 150/33/78R-S 0.6/1.2 Vertical tripod Pausch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Frequency inverter, 15KW, tested, max 2935 load hours, VLT FC-302P15KT5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 15 KW, VLT FC-302P15KT5E20H1XGXXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 29/25A - Output; 3x0-Vin, 0-590Hz, 32/27A - The frequency converters have been tested and only have between 1580 and max. 2935 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any def ...

Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Frequency inverter, 4 KW, tested, max. 606 load hours, VLT FC-302P4K0T5E20H1XG… Danfoss, used Top Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Frequency inverter Danfoss 4 KW, VLT FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXD0 - Input: 3x380-500V, 50/60Hz, 9,0/7,4A, - Output; 3x0-Vin, 0-590Hz, 10/8,2A, - The frequency converters have been tested and only have between 105 and max. 606 load hours. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defe ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 10.000 liter per hour., Standardization capacity: 15.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 15.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 12.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New whey clarification separator (clarifier / cleaner) for removing curd fines from the whey, so that the subsequent skimming process is more efficient. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. The best performance is achieved if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Whey clarification capacity: 10.000 liter per hour., The new offered whey clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substance (collected in the periphery of the bowl in the sludge chamber) periodically automatically eje ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 15.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 12.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk clarification separator (clarifier / cleaner) for removing impurities from milk and reduces the level of leucocytes and bacteria. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Product: Fresh cows milk (≤ 48h from milking). It can be carried out using both hot and / or cold milk, but the best performance is acheived if the temperature is between 50° - 55 °C. Feeding pressure (in): ± 1,5 bar. Clarified milk pressure (out): ± 4 bar., Milk clarification capacity: 10.000 liter per hour., The new offered milk clarification separator (clarifier) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special SUPER DUPLEX stainless steels with very high resistance to mechanical stress and corrosion., - Discharged of the product by means of 1 centripetal pump., - Discharge of the solid substan ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 10.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, ma ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 15.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. Ther percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 10.000 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 5.000 liter per hour., Standardization capacity: 7.500 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless AISI 304., - Bowl with disc stack, made out o ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

This 3-Axis CNC milling machine, the SORALUCE Soramill SL 4000, was manufactured in 1995. Featuring a CNC-415-Heidenhain control type and ISO 40/M16 spindle holder, it offers a spacious work area with traverse paths of x 2500 mm, z 900 mm, and y 1600 mm. With 30 tool stations and a weight of approximately 14.5 tonnes, it ensures robust performance for milling and drilling tasks. Consider the opportunity to buy this SORALUCE Soramill SL 4000 milling machine. For further information, contact us.

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Metal band saw from MEP type Shark 452-CCS. Built in 2007. Required set-up/working surface of the saw is: L3000mmxW1500mmxH2100. In addition, there are two roller tables, length/protrusion on the left approx. 1800mm, on the right 3500mm. Electro-hydraulic, semi-automatic band saw for 60° cuts • Large, mounted turntable with indexing • Large cutting area 450 x 330 mm on beams and profiles • Mechanical reduction gear • Electronic display • Base with coolant tray and chip drawer • Electric coolant pump • Automatic hydraulic saw blade lift at the end of the cut. We are selling our Shark 452 CCS, the saw is still in operation and fully operational. It has always served us very well and reliably. Our business has changed a lot in recent years and we therefore want to buy a slightly smaller saw. The machine shows the usual signs of wear and damage to the paintwork. The saw wa ...

Storage Container | 20 feet | 6 meters Buy now at a low price at: abcs://abc.troostwijkauctions.com/de/l/lagercontainer-%7C-20-fu%C3%9F- %7C-6-meter-%7C-co00957-A1-18991-20

Sanitary container, 20 feet (6m x 2.44m) Buy now at a low price at: abcs://abc.troostwijkauctions.com/de/l/sanitarcontainer-%7C-20-fu%C3%9 F-%7C-6-meter-%7C-wc-%2B-dusche-%7C-co00399-A1-18991-15

Standing Panel Saw Model 1265 Super Cut Working area 5000 x 2200 Year 93 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

Table saw model model 1712 with swivel rolling table year 91 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

Format and trimming circular saw model F 90 cutting length 2500 with cross slide year 73 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

Format and trimming circular saw model T 78 Cutting length 3300 mm 3 speeds Year of manufacture 94 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

Niton XRF equipment, model XL3t 980 GOOLD+. the spectrometer is practically new as it has been completely overhauled and recalibrated by the parent company in November 2023, changing the defective/worn parts which are under warranty for another six months or a year and which has the double metal/alloy -soil/rock setting. (each setting is worth 3000 euros) Overhauled by the manufacturer in November 2023, excellent conditions, comparable to a like new instrument. It is one of the most advanced models capable of reading even light metals such as aluminum, magnesium, silicon and precious metals. The equipment was purchased in Italy from the American company Thermo Fisher, to carry out tests which have now been completed. The spectrometer works perfectly. Reasons for sale: non-use. The equipment has a double configuration, both for soils and rocks and for alloys and metals. Th ...

Stainless steel switch cabinet, baying cabinet, 600x2300x600mm TS8452.600, Rittal, used Top Special price The current price of a similar product is € 3.280 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.1, bayed enclosure, TS8452.600, Rittal, used-Top: - Baying cabinet width 600mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. left side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - Incl. Rittal enclosure fan SK 3240.100 and limit switch - In ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel switch cabinet no.2 or no 4 or no 5, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the tr ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.3, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. right side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the trans ...

Borche BS150-III injection molding machine Year of production - 2015 Injection components: Screw diameter: 45 mm Injection Weight: 321g Injection pressure: 1850 bar Injection volume: 341cc Closure elements: Closing force: 150 t Clearance between columns: 460×460 mm Maximum table plate dimensions: 670×670 mm Ejector: hydraulic Closure system: knee Hybrid machine: energy-saving, high-speed, very quiet Euromap 67 robot interface air valve x 1 Hydraulic core string x 2 Central lubrication system The main motor - a servomotor controlled by an inverter It is possible to buy a Shini robot Dimensions: Weight: 4300 kg Length/Width/Height: 4.85×1.42×1.64 m Power: Pump/Motor: 15 kW Heaters: 9.6 kW Total: 24.6 kW

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

Two-way hydraulic bending machine, with CNC numerical control, with two bending jaws and deflection compensation (bombing). Upper instruments segmented. Year of manufacture 11/2008. These are two separate devices: a) material loading, b) double-sided bending machine with a table for feeding material incl. its rotation options. The machine was put into operation in 2009 and was only used for about half a year. It is possible to buy the bending machine itself, or just with the serving table. Bending capacities: material width: 2,500 mm thickness: max. 8 mm (material up to 400 N/mm2) edges with minimum height = up to 6 times the strength of the board minimum radius = up to 1.5 times the strength of the board.

Very beautiful JOPER coffee roaster with roasting profiler Year of manufacture: 2013 Condition: Very good (Was used only for micro lots) Hand crafted in portugal Usefull capacity per batch: 5kg Minimum batch size: 2.5kg Front and back lid made of cast iron Roasting and cooling at the same time 4 motors for the drum, the cooling tray arm, the cooling fan and the drum airflow Double wall drum Very well insulated roaster for increased quietness and energy efficiency Profile roasting system controlled by PLC, touch screen or computer. You can save roasting profiles and reproduce them later automatically. 2 thermocouples for bean and air temperature Artisan & Cropster connection Chaff collector included Adjustable Low Nox atmospheric LPG gas burner Power: 220V/50Hz Dimensions:2075 x 1160 x 2090H Weight: 450Kg Possibility to buy a destoner separately for 2000 ...

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...

Overview This can filling line was in operation at a large German food company until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity according to formats   150 ml Slim can - 18.000 cph  250 ml Slim can - 18.000 bph 330 ml Standard/ Sleek can - 15.000 cph  355 ml Sleek - 14.500 cph  500 ml Standard can - 11.000 cph  568 ml Standard can - 10.300 cph 900 ml King can  - 6.500 cph  Less than 3.000 operating hours  Carousel pitch circle diameter: 1,080 mm 24 filling valves Machine pitch: 141 mm  Single machines  Can Depalletizer | Krones | Pressant Universal 1A | 2020 Infeed at the bottom Discharge on top Includes safety fences, can conveyors, vacuum suction unit do identify damaged cans Empty Can Inspection | Krones | Cantronic 709 | 2021 Can Rinser | Meyer | Infeed Twiste ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 500 gram, 125 x 75 x ±56 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 70 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

Key data: 1 mm

Equipment and technical data: Edge banding machine for pre-coated edge material High-performance heat gun Roll capping electromagnetic Edge milling machine Sytem Hebrock End capping: Cross-cut module for flush cutting the front Edge protrusion Feed: 3-roller system Boom on both sides Add-on trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. workpiece length approx. 170 mm min. workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for use: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well  ...

This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. Its equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us.

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Key data: 4200 kN

Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement  ...

Key data: 450 kN

Battenfeld HM 45/60S with the Wittmann W702 sprue picker / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 30 mm Injection weight: 31.1 g Spraying pressure: 1100 bar Dosing volume: 34.2 ccm Clamping unit : Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Control Panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection It is possible to buy the machine with the Wittmann W702 sprue picker for additional payment Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x ...

Key data: 800 kN

Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Spray weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing unit, volumetric with container - Conveyor with proportional valve Metrics: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heat ...