brown sharpe used for sale

Semi-Automatic Roll Rewinder with Automatic Positioning and Manual Cutting Year of construction: 2023 Condition: Like new, barely in use Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain Inclusive: Blade Lubrication System, Motorized Sharpener, Film Packaging System Description: Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a maximum diameter of up to 400 mm and a minimum diameter of 100 mm. The positioning of the cutting head is automatic, while the lowering of the cutting head is done manually. The fastening system of the cutting head allows for high-precision cutting. System for varying the blade speed to cut all materials. Details: - Two guide benches. Displacement guides for the movement of the head. Cutting head displacement by timing belt. - A servo motor for the movement of the cutting head timing belt allows perfect positioning of  ...

grinding wheel diameter: 250 mm connected load frequency: 230 V turning speeds: 90 U/min total power requirement: 0,2 kW weight of the machine ca.: 18 Kg dimensions: 470 x 300 x 440 m Knife sharpening machine Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness of sanding paper: 1,3 mm Width of sanding paper: 41, 54 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm no. of working stations: 2 Stück total power requirement: 1,1 kW weight of the machine ca.: 0.2 t 1x Cup wheel diameter 300mm 1x tangential wheel 260x50mm Drill sharpening device More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness of sanding paper: 1,1 mm Width of sanding paper: 34 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness of sanding paper: 1,6 mm Width of sanding paper: 54, 60 und 80 mm Length of sanding paper: alle Längen mm Sharpening pitch: 3-4/4-6/5-8/ bis 10-14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multivalent steam boiler system 2 x 10 MW, AS NEW For dusty fuels or natural gas H. 2 identical lines: Single-flame tube boiler with economiser Fuel so far: lignite dust Calorific value Hu: 22,190 kJ/kg Ash content: 3.0 % – 3.5 % Rated thermal input: 19.5 MW FWL (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation Preset also for natural gas operation H Calorific value HS: 11.4 kJ/Nm³ (calorific value Hi 10.4 kJ/Nm³) Rated thermal input: 19.5 MW (2 x 9.75 MW FWL) Steam output: approx. 24 t saturated steam, 20 bar ü depending on the extent of condensate recirculation The change of the burner operation is carried out by changing a fitting piece on the burner. Boiler 1 and boiler 2 can be fired at the same time with different fuels. If desired, the contents of both fuel silos can also be b ...

continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system

cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg

Divider, counterpoint, dividing discs, useful sharpening bits, useful sharpening blades, cones and grips., Specification: Universal

Shaft holders, dividers, Wheels / axis milling, dividers, wheels, High: 1765 mm, Long: 2570 mm, Width: 1100 mm, Weight: 2500 Kg, Ø tool: 250 mm, Total power: 7.5 kva., Travel of table: 400 mm, Height of centers: 125 mm, Power wheel motor: 3 Kv., Ø max to sharpen: 250 mm, Distance between points: 635 mm, Revolutions of the wheel: 1750/2150/2850 mm, Maximum length to sharpen: 400 mm, Radial travel axis wheelhead: +35 / -65 mm, Vertical travel of the wheel: 175 mm, Cone holder shaft clamping pieces: ISO 40, Speed continuous longitudinal table: From 30 to 1000 mm / min., Specification: Strawberry mother

sheet width: 1030 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,00 t dimensions of the machine ca.: m Motorized adjustable rear gauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet support Side stop and table extension knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: ISHIKA WAJIMA HARIMA BROWN BOVERI Type: VTR 564-11 Serial Number: XI 97711 & XI 97712 RPM: 13800 T MAX: 620°deg.C N.MAX: 230 1/s Specification: V 01113, R 011, H 01112 W02108, E 01113 L36100, T 04100

Petroncini coffee grinder 1500kg per hour Was revised by actual owner Cooling system added by owner In perfect working condition Was exclusively used for Turkish Ibrik coffee (very fine) 2 sets of rolls very recently sharpened Inspection possible in operation Ready to work for many years ! Check my profile to see other roasting equipment

sheet width: 1040 mm plate thickness: 2,50 mm no. of strokes: 63 Hub/min cutting angle: 1,66 ° column arm: 100 mm table height: ca. 750 mm total power requirement: 3,0 kW weight of the machine ca.: 750 kg range L-W-H: 1470 x 1550 x 1020 mm Refurbished - shear blades sharpened like New () Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

Double grinding block make ELEKTRA BECKUM type SL 200Year of construction 1989Grinding wheel size: 200 x 40 mmSpeed: 2830 rpm.Drive power: 1.1 kWPower connection: 380 V / 50 HzWith- Knife sharpener length 800 mm- Knife sharpening device adjustable in anglevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal circular saw (chop saw) make IPB Pedrazzoli type Brown MasterSaw blade diameter: 275 mmMiter adjustment via turntable: 0 - 45 ° left2 saw blade speeds: 55/85 rpm.Drive power: 2.5 / 3 kWSpeeds Engine: 1400/2870 rpmExternal dimensions W x D x H: 1000 x 650 x 1800 mmWeight approx: 200 kgWith- on underframe- Quick-action vise- Length stop- Cooling device- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 MARGASA textile waste cutting machine type CMT 600 rotary cutter, year 1996, working width 600 mm, cutting blade width 610 mm, feeding conveyor 250 cm long, exit conveyor 190 cm long, supplied with blade sharpening table and spare blade

Diesel engine brand Caterpillar Type 3306T, Location: Brown Lenox K114 crusher, year of construction 1992, Accessories: Starter, Generator, Turbo, Engine is serviced and ready for use

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;

offer 22317 Specifications: - Saw blade dimensions up to 315 x 2 x 40 mm - Saw blade spindle speeds 43 + 86 rpm - Cutting range at 90° around 100 mm - square 80 mm - flat 105 x 70 mm - Cutting range at 45° left around 80 mm - square 70 mm - flat 75 x 70 mm opening width of the material clamping stick 175 mm - Material stop 1000 mm - Drive 400 V / 2.5 / 3.0 kW - Space requirement approx. W 600 x H 1400 x D 1000 mm - Weight approx. 180 kg - 7 saw blades

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

Package of the Oerlikon machines: 5 pcs Gear milling machine Oerlikon SM 3 2 pcs Gear tester Oerlikon SKT 2 pcs Laping gears Oerlikon SL 3 2 pcs Tool sharpener Magerle SKB

offer 22460 Specifications: - Printing capacity 120 t - Working width 2520 mm - Passage between stands 2150 mm - Table width 220 mm - Projection 240 mm - Installation height approx. 400 mm - Ram stroke 160 mm - Working height approx. 900 mm - Engine power approx. 11 kW - Oil filling approx. 120 l - Space requirement approx. W 2750 x H 2600 x D 1900 mm - Weight approx. 7000 kg - with: - Swivel arm – control panel - Digital displays for offset -Mot. Backgauge with display - Universal die, split sharpening tool - Two-hand control panel, foot switch, 2 support arms

offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms

Specifications: Machine stands over the hallway, does not go into the floor - Printing capacity 400 t - Working width 3100 mm - Passage between stands 2600 mm - Table width 300 mm - Projection 400 mm - Installation height 500 mm - Ram stroke 550 mm - Table height 1000 mm - Drive 400 V / 50 kW - Space requirement approx. W 4100 x H 3800 x D 2200 mm - Weight machine approx. 24800 kg - Weight accessories approx. 1000 kg -with: - Swivel arm – control panel for press depth - Control ATS 460 renewed in 2007 - two-hand control panel, foot switch, - Sharpening tool 2500 mm - V – die 2700 mm - various short press brake tools

Jet JSSG-10 Wet grinder STEPLESS SPEED 90-150 RPM. Grinding wheel D=250 x 50 x 12mm Versatile in professional version for sharpening planing knives, chisels, and other tools incl. protractor, leather pulling disc and 1 tube polishing paste for polishing Base and 2 drawers G&JET-708015M

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

Drill grinding machine GÜHRING Type SS 15 Fabr. No. 909 Year of construction approx. 1977 Drill diameter max. 40 mm Grinding wheel diameter right 300 mm Grinding wheel diameter left 250 mm Grinding wheel width 40 mm Grinding spindle speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Tip angle infinitely adjustable - Sharpening device - Gear motor for height oscillation in front of the pot disc - Diamond dressing holder - various drill holders - coolant device Space requirement L x W x H 1200 x 950 x 1550 mm Weight approx. 1150 kg; used

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Pressure: 0 t Sheet length: 150 mm Sheet width: 200 mm Positions ATC: 0   Minimum tool diameter 2 mm Maximum tool diameter 160 mm Maximum grinding depth 0.99/cycle Grinding rate 0.03 to 0.06 mm/Min Power 1.5 kW FAST, EASY AUTOMATIC TOOL GRINDING All punch press operators know how important tool maintenance is to part quality and tool life. Automatic tool can give a superior quality and process stability, considerably reducing maintenance times. TOGU-EU automatic tool sharpener has been specially designed for high quality sharpening of sheet metal tools. With fast and reliable sharpening of all standard tools, it allows their optimal repair and guarantees to always produce high quality parts. Unlike traditional grinding machines, the TOGU-EU range can minimise the amount of material removed during grinding, preventing the tool from overheating and extending its life time.  ...

2 Rolls coffee grinder with an output between 600kg and 1 ton per hour depending on the ground size Spare sharpened set of rolls included

Hanging filing cabinet, two-lane • External dimensions: W780 x D580 x H1350 mm • Made of durable quality sheet steel • SSI Schaefer • 4 drawers • Drawers with continuous handle strips • Pull-outs with open hanging frames • All drawers on telescopic rails for easy opening and closing • Brown, powder-coated • A pull-out lock prevents the simultaneous opening of several drawers and thus the overturning of the cabinet • Drawer dimensions inside: W 683 x D 495 x H 245 mm • Load per drawer: 55 kg • Weight: approx. 77 kg

Knife sharpening machine clamping length 820mm V 380 kW 0.75

x-travel: 600 mm y-travel: 270 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1120 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 100 - 480 mm T-slots: 3x 14x63 mm workpiece weight: max. 250 kg milling head swivable ca.: 360 ° total power requirement: 2,4 kW weight of the machine ca.: 1480 kg range L-W-H: 1660 x 1500 x 1730 mm New price ~ 13.000 euros The TURNIER universal milling machine is suitable for execution of light and medium-heavy milling work. Thanks to her big Versatility and ease of conversion can use them in workshops for processing small and medium-sized series with success be used. Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically positioned switches - Heavy cast iron machine stand for vibration-free work - Dovetail guides - Standard with automatic tabl ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

Impact scissors Karl Krause "ROBUST" Ma. No. : 3142 Cutting width: 112 cm Table: 72 x 114 cm 2 adjustable stops Knives sharpened Weight: 360 KG Tested and cleaned / Functional

: gebraucht : 1992 : 9680 : prompt, Zwischenverkauf v : 17300 € : 1 : 2050 mm : 6 mm : 12 - 20 1/min : 0,5 - 3 ° : 13 : 750 mm : 7.5 kW : 770 mm : 2680 mm : 1650 mm : 1570 mm : 3000 kg link motion controlled Backgauge with handwheel for fine adjustment Cutting angle adjustment 1 side stop 1000 mm manual cutting gap adjustment rear light barrier shield Knives newly sharpened backgauge motor 0,37 kW Operating manual of identical HACO TS in German DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

The grinding block machine from Oskar Pensel & Sohn Jserlohn is a powerful tool for professional use in workshops and industrial companies. With a robust construction and high-quality components, it offers a reliable and precise grinding solution. This grinder machine is equipped with two grinding wheels that offer speeds of 1700 and 2200 revolutions per minute (rpm). Thanks to the two independent motors, each with 2.2 hp power, you can adjust the speed to your requirements and efficiently process a wide range of materials. The machine type 764M15B is characterized by its high stability and durability. It provides a solid base for precise grinding and allows you to have precise control over the grinding process. The grinding block machine is ideal for deburring, sharpening, polishing and forming various workpieces. For further details about the grinder block machine, please do n ...

Manufacturer: Wiegand Type: 225/3 Connection:400 V, 50Hz Universal professional grind type 225/3 - overhauled If you want to sharpen splitters and cutter knives in addition to hand knives, you are well equipped with our triple grinding. This machine is also used by professional knife sharpeners. A lamellar grinding wheel is available for the crown grinding. Grinding wheel diameter 225 mm, 215 rpm. Cotton disc diameter 220 mm, 3000 rpm. Slat disc diameter 250 mm, 3000 rpm. Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

1 Gebr. Göckel knife sharpening machine G40el for chipper knives, chipper knives and planing knives with magnet 1300 x 150 mm Grinding motor: 5.5 kW Coolant tank with pump Mounts for slip rings d = 200 mm and d = 175 mm 1 holder for diamond grinding cups d = 200 mm 4 different stop rulers Switchboard Space requirement: approx. 2500 x 1300 x 1300 mm

Used full gate Esterer HDE/S with swing frame and automatic overhang adjustment for complete and efficient cutting of tree trunks including loading and unloading. Consisting of: · Round wood feed 1 · Round wood feed 2 · Clamping carriage + auxiliary carriage · Full gate Esterer HDE/S · Riving knife · Roller conveyor with 2 discharge stations · Control and hydraulics · Approx. 140 gang saw blades Options: RIVO R 200 GA automatic sharpening machine Setting device Volmer P H 4 D The system is in good used condition and can be inspected in operation by arrangement. Output: approx. 80 fm per shift, frame width: 700 mm, headroom: 700 mm, stroke: 500 mm, feed: max. 13 m/min, engine: 75 kW, More technical data: On demand

Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...

I sell the band saw sharpener Mebor MN-7, built in 2019 Sanding disc included. Made in Slovenia. Condition like new. Available right away.

Rod sharpening machine Schwanog Type 667P/A Year of construction: 1981 Mounting diameter: Ø6-67mm Cutting head speed: 235rpm Engine speed: 1,400rpm

Stephan UM25 Universal Machine two speeds 1440/2900 rpm Knife insert (blades are to be sharpened) Stainless steel boiler with double jacket (electrically heated, but without function) Machine tiltable for removing the processed medium Machine in very good condition Video about test run available