bri used for sale

Bridge rectifiers, rectifiers LENZE 14.630.13.004 voltage: max. 3270 V AC current: max. 1 A New ! Dimensions ( rectifier ): 52 x 26 x 18 mm Dimensions ( package ): 56 x 37 x 22 mm

ID1713 Löffler TB600 year/Year of construction 1994 Bridge saw, with control cabinet, CPU new in 2018, fully functional Bridge saw, with control cabinet, CPU new in 2018, fully functional

The line consists of: briquetting press RUF 400 sawdust drum dryer auger belt conveyor - 2 pcs sorter with magazine screw conveyor - 6 pcs wet sawdust container fuel tank wood waste boiler wood waste crusher exhaust fan with cyclone packaging machine with compressor Year of last overhaul: 2023

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel

Cutting table: hydr. Tilting table 3,500 x 2,000 mm / 0°-85° Cutting table extension: additional table rigid 3,500 x 430 mm Table load: max. 3,500 kg Support travel: 3,800 mm Bridge travel: 2,750 mm Support height adjustment: 1,000 mm Saw blade Ø: max. 1,300 mm Flange Ø: 250 mm Motor: 32 kW Speed: 500 - 6000 rpm. Spindle: SK50 Year of construction: 2022 Equipment: - Protective cover 1300 mm with vacuum cups, -Remote control - Camera surveillance -Auto. Measurement of workpiece thickness -Auto. Measurement of cutting wheelsØ - Special rubber cutting table - Protective enclosure for security doors

I am selling a heavy briquetting press RUF RB440. Year of construction 11/2002 Motor power 30kW Productivity Number 400 pcs. wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total weight 3000kg Equipment on the right - right entry box. Condition after full remont/500Mtstd warranty like new. Available soon. With full documentation and CE.

Description: Productivity 400/500 kg/h Pump motor 18.5 kW Briquette diameter 70 mm Operating pressure 200 bar Hopper capacity of 9.4 m3 (diameter 2000 mm - height 3000 mm) Refrigerator serial number: 0956, briquet diameter: 70 mm, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 2,000 kg

Description: Carrying capacity: 5000 kg Incl. runway Track dimensions: approx. 17000 mm Dimensions of the bridge: approx. 12000 mm Attention: the bridge crane can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 17,000 x 12,000 x 5,000 mm, weight approx.: 5,000 kg

Collector coins British Commonwealth 28 pcs mostly George VI and others 3x 6 pence George VI, 4x 1 shilling George VI, 3x Farthing George VI, Crown wedding Lady Diana, Australia 1 florin 1944 and 1951, 2x 1 penny 1964, 1/2 penny 1951, 6 pence 1943, 3 pence 1943, Cook Islands 1 dollar pp, Bahamas 5-25 cent 1974 pp, Fiji 1 florin 1958, 6 pence 1953 and 1965, Trinidad and Tobago 1 dollar 1979, coin holder

Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE available serial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg

Briquet press Make: Reinbold Type: RB 30 SV New machine Technische Daten: Reserve container approx. 1044 x 1044 x 1010 mm Hydraulic motor: 5,5 kW Briquett-Ø 50mm Oil quantity: 100 l Weight: Approx. 700 kg The max. material moisture should not exceed 18% Description The whole briquet unit consist of an easy-maintenance hydraulic, a powerful drive for the agitator as well as the the fill and press cylinders. The unit is compact placed on the machine. The accessable construction makes the service easy. Hydraulic unit consists of: motor, pressure switch, valve block, manometer, oil filter Switch box mounted on container, with SPS-Control Automatic Star-Delta-start Low oil switch Screw conveyor channel, screw conveyor Manual cylinder control Automatic end positioning of all cylinders Safety switch for oil temperature Connection for transport hose or c ...

Sand feeding/mixing/reactors (modernized in 2007): Control system: Siemens S7, number of machines: 23. 5x Jöst discharge chutes, sand screen, mixer, Eirich UE 62 discharge unit, bucket elevator, reactors, twin-shaft mixer, various weighing belts and conveyor belts. Press plant (modernized in 2012): Control system: Siemens S7, number of machines: 6. 2x Atlas presses incl. table removal and stacking device, scraper, empty trolley platform and Semet turntables, Atlas blank transfer table, 2 press tools in use and 22 additional tools available, various conveyor belts. Hardening shop/steam boiler (modernized in 2015): Control system: Siemens S7, number of machines: 13. Dapf boiler standard burner Saacke, 9x hardening boiler Scholz with automatic condensate drainage, water treatment Grünbeck, condensate collection tank, low-pressure feed water tank, approx. 130 hardening scales. Packaging sy ...

Ladies and gentlemen, we can offer a briquette plant. We are looking for large quantities of coal worldwide. Maybe also cooperations with the producer. Distribution of coal. We can offer mining machinery and equipment. We can offer consulting in mining. We would be pleased to have an offer. Yours sincerely Trade & Translations Hans Harald Benz

In-store baking oven WP BrillantDefectManufacturer : WPTyp : Brillant 4See picture for details

- SP Feeder Bridge Registration Motor - HP Part Number CA397-01980 - for HP Indigo Series 2 Machines

1 BIANCALANI discontinuous active relaxation and stabilization machine for tubular or open knit type BRIO, year 2013 (only 1700 working hours) Reduction of residual spirality in tubular fabrics Flat tumbling treatment, without tensions or defects Good hand, softness, and volume

Fomaco FBM 1000 Brine mixer Condition: Excellent Designed as an additional and essential tool for Fomaco brine injectors to mix ingredients. With this brine mixer, the process of mixing ingredients is very smooth and quick with spectacular results at output. The mixer automatically fills the tank with water to the desired level, and the operator only has to add the dry ingredients into the hopper. Brine mixing capacity: 1000 liters Tank volume: 40 liters Voltage: 3 x 400 V \ 50 Hz Dimensions (LxWxH): 2215 x 1940 x 2235 mm.

Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil  ...

Used 5-axis bridge-type machining center ROEDERS PXP601DSH (A3750) Condition: USED YEAR 2014 X-AXIS TRAVEL 540 mm Y-AXIS TRAVEL 635 mm Z-AXIS TRAVEL 400 mm DISTANCE SPINDLE NOSE-TABLE 50-555 mm RAPID FEEDS X-Y-Z 60 m/min SPINDLE 42000 rpm; 14 kW; HSK E40 A-AXIS ± 115 ° TABLE SIZE 340 x 340 mm MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 96 POS MAX TOOL DIAMETER 16 mm CONTROL UNIT ROEDERS RMS6X.xx4 WEIGHT 10000 Kg OVERALL DIMENSIONS 2885 x 2760 x 3050 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; EXHAUST SYSTEM NOTE AXES WITH LINEAR MOTOR

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Fomaco FGM 112 is a high-performance equipment designed to enhance the quality of meat and fish while increasing the yield rate. It is specifically suitable for working with bacalao fillets, as it offers extended clearance to accommodate them. The machine is equipped with two bridges, each featuring 112 Quadro needles with a diameter of 2.5 mm. The capacity of this injector can reach up to 15 tons per hour, depending on the product being processed. This injector fully complies with all sanitary and safety regulations, ensuring the highest standards are met while significantly reducing production costs. Additionally, it is equipped with a brine filter and a storage tank for convenient brine handling and storage.

Hardness tester, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell -Accessories are missing and are therefore sold as defective -Transfer in current condition as seen -Dimensions: 600/220/H660 mm -Weight: 92 kg

Measuring transducers, power measuring transducers, active power measuring transducers, analog converters, frequency/analog converters, frequency dividers, isolating converters, signal converters -Manufacturer: Weidmuller, signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Number: 9 piece -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece

Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder

Automatic buffing machine for flat panels Table size 4800 x 1400 mm. The machine has got 4 rotating pads mounted on a rotor, speed rotor adjustable Buffing speed bridge adjustable

Key data: 1100 mm, 1 , 200 mm

Calibration and fine sanding machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding pad, inclined sanding unit and lacquer sanding. A video of the machine running can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Bind machine with combination unit and electronic link pressure beam Edge segments can be switched on and off Segment width of pressure beam 35mm Pneumatic Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Webbing feed infinitely variable from approx. 3 to 15 m/min Strip blow-off device workpiece-controlled Constant table height approx. 900mm due to adjustment of the upper part of the machine, thus can also be integrated into grinding lines Feed bel ...

Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

 Continuous bearing Seam BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik Continuous shelves of different designs improve your intralogistics: FIFO principle: First In - First Out. The goods are removed in the order of put-away. In the area of perishable items such as pharmaceutical products or food essential. You can store large quantities in large shelves of great depth. This increases the utilization per sqm of storage space. You can stock many different items. Small quantities can be picked on the picking side. Loading side and picking side are separated. All processes are therefore fluid. The throughpass speed increases. The risk of accidents is reduced. In addition, you can receive packing tables and roller conveyors from us, which bring and remove the goods on both sides of the shelf. You can also receive an indi ...

Filter cartridges for AGIE sinkers Electrolyte filter cartridge Filter cartridges NEW and org. Packed Technical data please clarify briefly Tel. . Electrolyte filter cartridge Price pcs. 85 € net Complete. Sentence 6 pcs. New and Org. Packed 480 € Net plus 19% tax, freight and packaging Pradler Machine Service Tel. 05242 / 43186

MFC.: HÄNDLE, LINGL, RIETER, BUILT: 1959-2008, CAP.: 20.0 - 26.0 MILL. NF/ANNUM, INDIVIDUAL ITEMS FOR SALE!

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

A shelving system that can be used for shop fittings, as well as for storage by Tegometall, is offered. the frames of these shelves are deep approx. 2.80 m wide ca 2.18 m high 1.25 m In conjunction with Tegometallwand -, or gondola shelves, they are excellent for loading equipment. As they complete with chipboard, above it still reserves can be stored. The inner shelves can be equipped optionally with smooth or perforated walls, floors, bins, hooks, etc. so that they can be used for merchandise of any kind. Without this inner life they are storage racks, E.g. for the storage of larger materials and pallets. A double box with interior shelves is included in the offer, i.e. 3 red double frame (2.18 m high; 1.25 m deep, together approx. 5.60 m wide) with the necessary trusses and bridges of depth for each field a white double support backs, optional perforated, smooth or mixed for 4 fields  ...

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Attachment: Chamber filter press used Type: Rittershaus & Baldwin AEHIS 1200 Design: bridges Holm Filter plates sizes: 1200 x 1200 mm Plate number: 35 Filter plates: PP Thickness: 30 mm Schedule: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. 85 m ² Presses contents: approx. 1200 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Pump technology: optional Dimensions: L 5800 x B 1900 (2550) x H 2500 (2900) mm Accessories: filter cloth car wash, optional light barrier Extra services: On this complex warranty months 6-12. Condition: The unit is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work.

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...