bri used for sale

Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017

Tool presetter SOMET SPS 200 U built: 1989 Table dimensions: 700 x 550 mm < >Coordinates of the bridge ride: 200 mm Coordinates of the sleigh ride: 350 mm Measuring room height: 250 mm 2x Measuring unit: FEINMESS DRESDEN Type: OFD FAE 4 Accuracy: 0.002 mm Angle Measuring System: MEOPTA Type: PMP 100 on underframe New ! preserved ! Angle measuring system used ! Dimensions: 800 x 750 x 1600 mm

Coolant system FILTERTECHNIK GERA coolant system incomplete ( drive for the belts is missing (Fig. 2) ) with 4 Brinkmann Pumpen TBR63/270 (2 times) TB303/370-T TB250/350 New Dimensions: 2600 x 1400 x 1200 mm

Coolant processing, with magnetic roller and submersible pump LIQUI FILTER GmbH Magnetic roller: MW 210 Roll width: 210 mm Roll diameter: Ø 140 / 170 / 175 mm without motor ! Submersible pump: BRINKMANN TB25/170-Z+095 Immersion depth: 170 mm Flange: Ø 130 mm Pump base: 100 mm Q: 30 l/min H: 2 m engine: 0.1 kW 3200 rpm 480 V 3AC 60 Hz tank: approx. 100 l New ! Dimensions: 450 x 375 x 420 mm

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: GE FANUC MAIER PRO total power requirement: kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,4 x 1,6 x 2,3 m m Switch-on time: 70,076 hours. Automatic time: 40,135 hours. Counter spindle available (see pictures) Machine was converted for spindle production (see loading magazine), dismantling According to the previous owner, this was easily possible. Machine brings alarms (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary UV Flexo label press - Nine Colour Make Mark Andy Model XP5000 Year 2006 Running hours +/- 12.800 hours Maximum width 480 mm Number of units 9 flexo printing units Register by BST camera control Lamination wet and dry lamination station UV-dryer GEW E Brick, 5 powerunits, 10 lamps Hot air drying 9 hot air dryers Corona treatment 1 Corona treatment unit Printing cylinders: Full set Anilox rollers: 28 Anilox rollers ranging from 300 to 1200 LPI Details Die cutting station with 1 set of cilinders Chiller unit

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

brinell hardness: 15,625 rockwell hardness: 60-150 HRC throat: 130 mm total power requirement: 0 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 940 / 350 / 620 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wentzky 4R150 (Graessner), lapping machine, dia mm 1500, 4 rings (I.D. 535 mm), This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.or ...

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Olympus Iplex IV9420RT Videoscope in neat working condition Scope diameter: 4 mm Scope length: 2 m Angle: 130° Illumination: Ultra-high intensity LED illumination Image manipulations 5X digital zoom, 10 step digital brightness control Gain control 3 step adjustable gain control with exclusive WiDER™ brightness level balancing technology. Sharpness control 4 step adjustable sharpness control Saturation control 3 step adjustable control of color saturation Recording media USB flash memory (1GB standard, compatible with recommended USB flash device) Still image recording Resolution -- H768 x V576 (pixels) Recording Format -- Compressed JPEG format Video recording Resolution -- H640 x V480 (pixels) Recording Format -- AVI MPEG-4 format, Can be played on the Windows Media Player. #8062 Net prices plus VAT

Weiss SC/KWT 450 Corrosion Test Chamber Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: room temp. up to +50 °C Condensation test: room temp. up to +45 °C Voltage: 1/N/PE AC 230V +-10% 50Hz Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Type: SC/KWT 450 More items - new and used - can be found in our shop! International shipping costs on request!

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

Crawler Dumper Dumper 500kg with Ride-On Platform and Bucket NEW - Finally assembled in Germany Model: LP05 Length: 1150 Width: 648 Height: 515 Capacity: 0.2m³ Angel of dumping: 57°/47° Engine Model: Briggs & Stratton Fuel: gasoline Rated Power: 6.8Kw Rotation speed: 3000r/min Cylinders: 1 Hydraulic Motor: Large Torque Motor Dual Pump: Gear Pump System pressure: 16MPa System flow: 12ml/min Hydraulic Oil Tank Capacity: 19.4L Machine Operating weight: 600kg Loading capacity: 500kg Fuel tank: 5.5L Speed: 3.5km/h

Mini Excavator KV 20 Mini Excavator - NEW Finally assembled in Germany with engine Kubota 1105 - 18,2Kw 4 Legs Roof Swing Boom Adjustable Track High/Low Speed Accessories for mini excavators Bridge width 92mm (see picture) Bolt diameter 25mm (see picture) Bolt spacing 85mm (see picture)

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

Mini Excavator KV20 Mini Excavator - NEW with motor Laidong 385 - 18,4Kw Finally assembled in Germany 4 Legs Roof Swing Boom Adjustable Track High/Low Speed Accessories for mini excavators Bridge width 92mm (see picture) Bolt diameter 25mm (see picture) Bolt spacing 85mm (see picture)

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L ...

Insertion with tweezers; Feeding leaflet/brief leaflet; Feeding pots; Closure case; Exit with expulsion. Machine weight: kg. 2200 Compressed air consumption: Nl/min. 200 Pressure: 6 bar Total absorption installed: kW 3 CASES DIMENSIONS (MM): Minute: A = 20; B = 24; C/H (Low) = 40; High C/H: 50 Maximum: . : A = 120; B = 100; C/H (Low) = 100; C/H (High): 180; A + B = 200

#3219 8 x UV dryer GEW Age: 2011 Available: Immediately Location: Europe -8 pcs. used UV dryer - Printing width 680 mm (used on a Omet VF 670) - Mercury lamps, 1300 W, air cooled - E-Brick, 16 KW

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Tool holder, milling holder, milling tool -Take: SK40 -Inner diameter: 25 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for: tool changer -Weight: 3.5 kg

Manufacturer: IPE, Control: Programm, Year: ca. 2000, Filter system - positive pressure: yes, Volume flow rate m³/h: 4000, Filterfläche m²: 20,5, Number of filter filter gallerys: 2, Rückluftfähig: yes, Cleaning of scavenging air: Druckluft, Electronic control board: yes, 2nd Exhaust fan kW: 4, inkl Brikettpresse RSN, Year :ca. 2000

Tool holder, milling holder, milling tool -Number: 4x holder SK50 -Inner diameter: 12/16/20/25 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for: tool changer -Sale: only complete -Weight: 15 kg

• Package dimensions L 45-300 mm, W 40-190 mm, H 16-100 mm depending on format set • Output max. 47 cycles/min, the max. output depends on the format and product • For all heat-sealable films (PP/PVC/PE/Cellophane) • Film roll outer diam. max. 320 mm, width max. 425 mm • 90 degree infeed belt • Knife bridge with new knife • Eltex film unloader with discharging bar • Perforation knife • Without tear thread device • Without multi-layer stacker • Various format parts • Contactor control • Electr. connection 230/400V/50Hz

Key data: 1350 mm, 3

SPECIFICATIONS: Working width mm: 1350 Sanding belt dimensions mm: 2620 x 1300 Configuration: I. Iron roller diameter 300 mm II. Hard rubber roller diameter 300 mm - hardness 80 shore III. Scotch Brite Brush Unit 02 Motors + power regulator KW 30 / KW 22 / KW 2,2 Complete with motorized conveyor belt mm: 3500 x 1300

Tool holder, milling holder, milling tool -Number: 7x SK50 mounts -Interior diameter: 32 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for: tool changer -Sale: only complete -Weight: 4.6 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -Sockets: Ø 22-50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head shell end mill spindle tool -Sale: only complete -Weight: 68 kg

Tool holder, milling holder, milling tool -Number: 20x SK50 mounts -Sockets: Ø 22-50 mm -Brill chucks: flat chucks, reducing sleeves, cutter head shell end mill spindle tool -Sale: only complete -Weight: 70 kg

Overhead crane, indoor crane, assembly crane, workplace crane -with 2x electric cable pulls -Load capacity: 2x 1600 kg -Bridge load capacity: 3.2 tons - Wingspan: 6.4m -hall service -Dimensions: 2000/6400/H1000 mm -Weight: about 2000 kg

Pipe coupling, pressure coupling, quick coupling, fire brigade coupling, Storz coupling, hose coupling -Manufacturer: Schott, quick coupling type PVR 12/90 to Ø 150 mm -Coupling: size C-DIN 14 302 -Dimensions: Ø160 x 330 mm -Weight: 1.6 kg/pc.

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 800 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 30/8 mm -Gratings: hot-dip galvanized -Number: 1x grids available -Price per piece -Weight: 5 kg/pcs

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Brush segment Quick Snap, brush, plastic brush, nylon brush, weed brush, conical brush -Brush: steel / plastic bristles -Wooden ring: Ø 490/328 mm -Quantity: 1x brushes available -Price per piece -Dimension: Ø 760 x 260 mm -Weight: 9.2 kg / piece

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Frizlen steel grid fixed resistor device: Art.-ID 56489 -P: 9 kW -R: 1 ohm -E: 2700 kWs -Price: per piece -Number: 2 pieces -Dimensions: 600/480/H450 mm -Weight: 42 kg

Magnetic drill, hand drill -Magnet foot: Fein 2000 -Bring machine: AEG type HBE-IV -Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265 V/200 Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Grids, grids, light grids, inlay grids, inlay grids, stairs -available: 1 piece -Dimensions: 1260 x 230 mm -Total height: 60 mm - Struts wall thickness: 2 mm - Bridge height: 30/10 mm -Grating: hot-dip galvanized -Weight: 9 kg

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Power: 4x5/3/1.29/0.86 kW -Resistance: 4x 33/28/66/100 Ohm -Dimensions: 595/480/H955 mm -Weight: 58 kg

Towing trolleys, cable trolleys, conductor rails and accessories, pantographs, cable trolleys, busbars, pantographs, bridge cranes, hall cranes -Cable trolley for: flat cable -Type: MS1F125-50-G-PM-K -Plastic bag with: 3 pieces -Price: complete -Dimensions: 200/200/H100 mm -Weight: 0.4 kg

Grids, grids, light grids, insert grids, insert grids -Dimensions: 940 x 785 mm -Bridge height: 50 mm -Longitudinal struts wall thickness: 3/5 mm -Grating: hot-dip galvanized -Number: 1 pieces available -Price: per piece -Weight: 51 kg/piece

Bridge crane, hall crane, assembly crane, workplace crane, ceiling crane system -without chain hoist (available for an extra charge) -Load capacity: 1000 kg -Span width: 3100 mm -Crane length: 4100 mm -Helmet rails -Interior height of the profile: 65 mm -Inside width of the profile: 70 mm -Transport dimensions: 4140/450/H250 mm -Own weight: 180 kg

Grids, grating, light grids, insert grids, insert grids -Dimensions: 990 x 490 mm -Bridge height: 30 mm -Longitudinal struts wall thickness: 2 mm -Grid grilles: hot-dip galvanized -Number: 2 pieces available -Price: per piece -Weight: 10.1 kg/piece

Grids, grids, light grids, insert grids, insert grids -Execution: -Dimensions: 1000 x 870 mm -Bridge height: 30 mm -Outer frame and cross struts wall thickness: 3 mm -Longitudinal struts wall thickness: 2 mm -Galvanized -Weight: 18.5 kg/piece