bottle pet used for sale

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit

Water tanks, extinguishing water tanks and heating oil tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 A used diesel tank according to DIN 6616 in the size of 7,000 litres is offered. Volume: 7,000 Ltr. Material: steel tank tank, material S235JRG2 Tank according to DIN 6616 Tank shape: cylindrical, horizontal, in integrated shells, double-walled Diameter 1.60 m, L approx. 3.70 m Exits: Dom on the top Tank according to DIN 6616 for the above-ground storage of heating oil and diesel Tank is overhauled and will be fitted with new fittings. An electronic dispensing system can also be installed. Tank technology newly equipped with: lid, filling nozzle, ventilation nozzle, suction line, truck filling nozzle, limit sensor and leakage indicator Tank is in top condition and is immediately available. Delivery time approx. 1  ...

Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

AOKI One step PET injection stretch blow molding machines for jar

Qty. 1 Second-hand blower and PET filling line Mfc.: SMI, SARCMI, KOSME, EC-JET, SIMONAZZI, ZAMBELLI, PROCOMAC, ACMI, ATLAS, SIAD, ASKI, SIDEL Built: 1976 – 2012 Plastic Cap Product: Still & sparkling water Capacity: 12 000 bottles/hour Scope of supply: Blower machines Filler Labeller Conveyors Shrinkwrapper Palletiser Compressors Chiller Dryer

Petrol engine -Sale: as dismanteld -Dimensions: 1200/800/H800 mm -Weight: 200 kg

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

PET/Can Baler, Special Baler BTS-MF60hd The BTS-MF60hd Dosen_PET special baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and much more. The press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Compact bales weighing up to 70 kg - Crimps a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross-tying ensures a secure hold of the material in the bale - Fully automatic bale ejection - Maximum safety standards - CE certified - Quality product Made in Europe Press force: 13 t Motor: 2.2 kW 16 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2144 x 1267 x 1328 mm Transport height: 2144 mm Machine weight: 706 kg Cycle time: 24 seconds Noise: 68 dB Bal ...

PET filling line - capacity: 10.000 bph – 1,5 L Year of manufacturing: 1999 – 2006 Control system: Siemens S7 Working hours: 26588 h (total on compressor) consisting of: Blowing machine Blowmax 10 year of manufacturing: 1999 incl. Chiller OHF 1250 Omega year of manufacturing: 1999 Preform dumping, feeding and orientation device year of manufacturing: 1999 High pressure compressor Ateliers Francois CE46BSG 40 year of manufacturing: 1999 Air conveying system year of manufacturing: 1999 Krones Bloc consisting of: Bottle rinser Krones Variojet 2160-054-126 with 54 rinsing stations year of manufacturing: 1999 Bottle filler Krones VP-L60-113 / SV10 / S LM wiht 60 filling valves and 10head screw capper year of manufacturing: 1999 Cap feeding system Gassner year of manufacturing: 1999 Labelling machine Krones Canmatic 600-10 RM year of m ...

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

This lot has been tested for function.

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Filter Petrodiesel Part number: 60502-12S-0005

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.

Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.

PET stretch blow molder with 4 cavities, capacity up to 5,500 bottles per hour at 1 ltr bottle size 2 ltr. Spare parts, blow moulds and neck spare parts can be purchased optionally. The machine was overhauled by Flexblow and various new parts were installed. Siemens control system with English operating language. Machine already dismantled and stored

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. Slat conveyors year ...

CLEXTRAL STOLZ Petfood extrusion line a complete double screw extrusion line for petfood, capacity between 1 / 2.5 tonnes per hour. Was stopped end year 2022. Still visible in the layout. Main machines : extruder CLEXTRAL BC82in very good working condition, granulator, conditionner WENGER, coater, dryer all the peripheral.. Information and list of machines on request

SIDEL SBO 6/10 series 1 PET blow-moulding machine for 6 moulds Linear oven with 10 modules Capacity 7.200 bph, equipped for quick change moulds Personalization for preform neck 29/25 Machine supplied with preforms hopper, unscrambler and infeed rail Sidel electrical panel, PCC drive and control panel Huge set of spare parts valued at 30.000€ included Dismantled february 2023 and stored in our warehouse. Excellent machine with low working hours. Very attractive pricing. Available immediately

HUSKY HPETL 230 (230 ton) injection molding machines for PET preform. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

STM PET blowing machine for 5 to 7 liters bottles Manufacturing year 2015 low working hours Currently blowing 6 liters bottles on mould 3 cavities at 30 bar. Capacity 3.000 bph Machine equipped with: preforms hopper and feeding system loading and process of the preforms inside oven with internal grip Preform heating by IR oven with 6 heaters each heating module with 8 lamps Preform grip and transfer to the mould Stretching & blowing station Exit device of the processed bottle EPI Eco power energy saving system Chiller and HP compressor included & also full filling & downstream line Unique opportunity Available immediately

SIDEL type SBO 6 Serie 2 Year: 1999 Capacity: 7.800 bph Number of moulds:: 6 Equipped : quick change for shell molds Oven type : Sidel caterpillar oven Neck personalization: still mineral water 30/25 Working hours: low working hours Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel electrical cabinet & PCC including HP compressor & chiller also Sidel air conveying system Equipment in good condition Available immediately

automatischer Rinser / Filier / Verschließer Maschine; mit Rinser mit fester Düse; mit elektronischem Durchflussmesser Schraubverschließer; mit 40 Rinserzangen; mit 40 Füllventilen; mit 8 Kappenköpfe; Teilung 113,1 mm; Durchmesser 1440 mm; im Uhrzeigersinn Drehung; für Fruchtsaft bestimmt; Produktionskappe 12 000 Flaschen / Stunde; Füllungstemp 2-5 c; installierte Leistung 14 kW; Gasdruck 8-12 bar; Luftdruck 6-8 bar; Wasserdruck 3-4 bar; 24 V; elektrisch Anschluss 380 V; 50 hz; mit Kraftschrank 18 verschiedene Arten von natürlichem Saft mit und ohne Fruchtfleisch; kalte Füllung, Ultra sauber und folgende Kühlkette flache Kunststoff-Schraubkappe 38 mm More then 300 machines new and second hand on our seema .de

-For PET or PEHD bottles -tests if the bottle is leaking by a pressure sensor in the side belts -Fill height control with radiation Spectrum TX VX 8.00.002 Serial Number: 2TG022697 More then 300 machines new and second hand on our seema .de

ZALKIN PET-Screwcapper 6 Head amount of capping heads: 6 working direction: left-right type of closures: Twist Off More then 300 machines new and second hand on our seema .de

Preform Weight (Max): 32,5 // Neck Type: PCO

Preform Weight (Max): 17 g // Neck Type: 30/25

Output: 43200 // Bottle Size: 300-700ml

Hydraulic pump with petrol engine -Mobile hydraulic power pack with petrol engine -Unfortunately no further data available

Stainless steel storage box, transport box, pallet box, crate, box -Material: 4301 stainless steel -Number: 1x box available -Dimensions: 1150/800/H920 mm -Weight: 98kg

Gasoline engine, gas engine, propulsion engine -1 cylinder -Air cooled -Motor power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

AOKI SBIII-1000H-60 year `2014 for 18~25liter bottle

Make: Future Tech Model: Twin Screw PET / PP / PS Extrusion Line Condition: Excellent – new after testing. Availability: Immediately Materials: PET / PP / PS (Virgin and Recycled Flake) Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 1100mm Output: 1000kg/hour Main Extruder: 95mm Future Tech UV95 twin screw extruder water cooled Co-Extruder: 65mm Future tech single screw with 30kW ac motor & invertor Running from 0.18mm to 1.2mm thick PET up to 1000kg/hr. Mix of virgin, post consumer bottle flake and skeletal flake. 2 Component volumetric blending system for primary and secondary extruders. 95mm Future Tech UW95/44 twin screw extruder water cooled. 250kW ac motor with inverter drive. Triple vented with liquid ring vacuum pump system. Hydraulic screen changer, dual piston, filter dia Φ180mm, manual control. JCTimes model 275 gear pump with ac motor and  ...

Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...

HUSKY electric HPETL 230 (230 ton) year `2015 for PET preform

Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...

Air Compressor Atelier Francois CE68 A, 40 bar with Dryer and Air tank Two air compressors, both type CE68A. made by Atelier Francois, Belgium in 2001 and 2000, capacity FAD is 35 Nm3 /min. with discharge pressure of 40 bars. The delivery includes the skid mounted 3–stage intercooled oil-free piston compressor and 1.000 litre galvanized 40 bar pressured air tank, separately installed stainless steel air dryer with integrated 1 micron air filter and radiator cooler. Air dryer has refrigerant cooled stainless steel plate heat exchanger which condensates the moisture from air. Both compressors are installed and in operation till end of 2023. Compressor Manufacturer: Atelier Francois, Belgium Model: CE68A Serial no: 20G200 Manufacturing year: 2000 and 2001 Capacity FAD: 2100 m³/h at 40 bar Operation hours: 37000 and 27000 (still running) Speed: 480 rpm Electric motor: ...

Capacity:  10.800bph in 1500ml                   18-20.000 bph 500 ml bottles Products:  Still water. After Premix upgrade suitable for carbonated and soft drinks Equipment List: Blow molder Krones Contiform 510/K784-241 Manufactured in 2008 Blower with 10 cavities Chiller KKT Kraus KLC50T/P512469/08 Manufactured in 2008 Air conveyors Europool Manufactured in 2000 Filler SARCMI Bluestar 2000/C9021 70 fillers Manufactured in 2000 Capper AROL TS-Euro PK / 17460 10 heads Manufactured in 2019 Labelling machine Krones Contiroll / N Series 745-825 Manufactured in 2000 Shrink wrapper DIMAC – Owen DIMAC  Dimac Star F / MATR. A401381 Manufactured in 2003 Shrink wrapper DIMAC – Owen DIMAC  Dimac Star FX / MATR. A401184 Manufactured in 2002 Palletizer  ACMI Rasar P135/2499 Manufactured in 2003 Feeder  ACMI 475/C2875 Manufactured in 2003 Winder TOSA MOD 121/032290 M ...