bosch 0 001 used for sale

Hydraulic cylinder, double-acting REXROTH CD 160 C 32/14 - 0185 ( CD160C32/14-0185 ) Z10/01HHDM11A 549244 Piston diameter: Ø 32 mm Rod diameter: Ø 14 mm stroke: 185 mm rod thread: M12 x 1,25, Length: 12 mm Flange: Ø 42 / 71 x 51 mm hole spacing: 58 / 33 mm 4x bore: Ø 6.5 mm New ! Dimensions: 335 x 71 x 60 mm

Hydraulic cylinder, double-acting REXROTH CD 70 C 25/16 - 0425 ( CD70C25/16-0425 ) Z11/01HCDM11A N16637 piston diameter: Ø 40 mm Rod diameter: Ø 16 mm stroke: 425 mm rod thread: M10 x 1.02 5, Length: 16mm Flange: 63 x 38mm hole spacing: 52 / 28 mm 4x bore: Ø 6.5 mm used, tested ! Dimensions: 565 x 63 x 44 mm

Hydraulic cylinder, double-acting, with pivot pin REXROTH CD 70 S 25/16 - 0040 ( CD70S25/16-0040 ) Z11/13HEDM11A N20559 piston diameter: Ø 25 mm rod diameter: Ø 16 mm stroke: 40 mm rod female thread: M10 x 1.0 5, Depth: 25 mm 2x pivot: Ø 19 mm, Length: 18 mm used, tested ! Dimensions: 160 x 76 x 54 mm

Hydraulic cylinder, double-acting REXROTH CD 70 C 25/16 - 0420 ( CD70C25/16-0420 ) Z11/01HEDM11A N06358 Piston diameter: Ø 40 mm rod diameter: Ø 16 mm stroke: 420 mm rod female thread: M10 x 1,5, Depth: 25mm Flange: 63 x 38mm hole spacing: 52 / 28 mm 4x bore: Ø 6.5 mm used, tested ! Dimensions: 540 x 63 x 44 mm

Hydraulic cylinder, double-acting, with piston rod on both sides REXROTH CG 70 P 25/16 - 0110 ( CG70P25/16-0110 ) Z11/01HEDM23AP N10129 piston diameter: Ø 25 mm rod diameter: Ø 16 mm stroke: 110 mm rod female thread: 2x M10 x 1,5, Depth: 25mm flange: 36 x 36 mm bolt circle: Ø 40 mm 4x stud bolt: M5 x 0.8, length: 20 mm used, tested ! Dimensions: 372 x 56 x 45 mm

Gear pump, hydraulic pump REXROTH, BOSCH AZPF-11-008RAB1MG 0510 425 044 ( 0510425044 ) Pressure: max. 2800 bar Volume: 8 cm3/revolution Speed: max. 400 rpm Shaft diameter: Ø 18 mm Shaft length: 30 mm Groove width: 6 mm flange: Ø 80 / 125 x 90 mm hole spacing: 100 / 72.5 mm New ! Dimensions: 127 x 90 x 125 mm

Directional valve, solenoid valve, hydraulic valve BOSCH 0810 091 233 ( 0810091233 ) 081WV06P1V1014WS024/00D0 315 bar 24 V approx. 1.0 m connection cable used, tested ! Dimensions: 150 x 45 x 85 mm

Pressure relief valve, pressure relief valve with intermediate plate BOSCH 0 532 004 102 ( 0532004102 ) TÜV.SV.97.697.6.F.G.P 819862623MB 50 bar 40 l/min used, tested ! Dimensions: 190 x 80 x 45 mm

Throttle valve, proportional throttle valve block installation, pilot-operated BOSCH 0811 402 642 ( 0811402642 ) FESXE50CA-1X/980LK0B1M 315 bar 24 V DC with built-in electronics (OBE) and inductive displacement transducer New ! Dimensions: 220 x 140 x 300 mm

Pneumatic cylinders, tie rod cylinders Bosch 0822343803 P: 10 bar piston diameter Ø 63 mm stroke: 100 mm rod diameter Ø 20 mm New ! Dimensions: 395 x 75 x 75 mm

Pressure switch BOSCH 0 821 100 004 ( 0821100004 ) Pressure range: 0.5 - 1.5 bar Pmax.: 200 bar Voltage: max. 250 V approx. 0.45 m Connection cable New Dimensions ( without cable ): 117 x 31 x 31 mm

Front panel valve, 2 pieces BOSCH 0 820 408 006 ( 0820408006 ) 0 - 10 bar max. 190 l/min Pneumatic connections: M5 New ! dimensions ( single front panel valve ): 70 x 55 x 40 mm

Pressure transmitter BOSCH 0811 405 510 Measuring range: 0 - 210 bar U(signal): 0.1 - 10 V DC U(supply): 12 - 36 V DC used, tested ! Dimensions: 70 x 35 x 35 mm

3 - Directional pressure control valve with position control BOSCH 0 811 402 051 Pv: 0 - 175 bar Pmax: 315 bar G: 40 l/min Sensor: Type 1 887 001 106 used, tested ! Dimensions: 280 x 90 x 45 mm

Directional control valve, solenoid valve, hydraulic valve BOSCH 0 810 092 113 ( 0810092113 ) 081WV06P1N1020WS024/00E00 250 bar 24 V DC used, tested ! Dimensions: 215 x 47 x 95 mm

Directional control valve, solenoid valve, hydraulic valve BOSCH 0810 091 227 ( 0810091227 ) 081WV06P1V1012WS024/00D0 315 bar 24 V DC New ! Dimensions: 146 x 46 x 100 mm

Directional control valve, control valve BOSCH 0 811 404 087 ( 0811404087 ) 4WRP 10 W1 63S –1X/G24Z4/M Pmax.: 315 bar New ! Dimensions: 350 x 70 x 100 mm

Starter, starter, diesel engine, propulsion engine, marine diesel, diesel generator, diesel generator -Manufacturer: Bosch, starter from generator MWM RHS 518V16 -Type: Bosch 0 001 510 003 -Voltage: 24V 9HP -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

RECON Bosch Starter for MWM 620 V12 Part number: 0116 2640 / 1204 1381 Bosch number: 0 001 510-003 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Bosch Starter for MWM TCD 2016 V12 Part number: 0117 8721 Bosch number: 0 001 417-058 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Stock # 5144 Proportional valve, pressure valve H01, Manufacturer: Bosch 0811 402 001 used

Stock # 5042 Valve Paths 4/3 Manufacturer: Bosch No 0810 001 814 used

Starter Bosch -Voltage: 12V -Type: 0 001 367 017 -Teeth: 10 -Weight 15 kg

Starter Bosch -Voltage: 24 V -Type: 0 001 368 616 -Teeth: 11 -Weight: 15 kg

Starter Bosch -Bosch type: 0 001 368 616 -Voltage: 24 V -Teeth: 9 -Dimensions: 370/125/H170 mm -Weight: 16 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 265 mm -Price: per piece -Number: 2 pieces -Dimensions: Ø 28 x 265 mm -Weight: 0.8 kg/piece

Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: 1 827 001 272 -Quantity: 35 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 272/65/H65 mm -Weight: 2.05 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection M 16 x 1.25 thread) -Total length: 220 mm -Total length extended: 245 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Weight: 2 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Number: 1x valve available -Price: per piece -Weight: 0.15 kg

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Brand new Original Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Remanufactured Bosch Starter Voltage: 24 volt Power: 9,0 KW Number of teeth: Mounting hole: 3 Direction of rotation: right Reference number 229312 JENBACHER WERKE 0001510039 Bosch

Stock #5024 Directional valve 4/2 Manufacturer: Bosch No. 0810 090 106 used

Double pneumatic table press Bosch brand Built in 1983 maximum pressure 18 kN maximum stroke: 70 mm maximum operating pressure 5 bar Two-handed actuation knob Table made of aluminium profiles Condition used

Valve, Proportional, Built-in Valve Bosch No. 0811402501 Used

From warehouse dissolution, as good as new with bearing traces. 1 x Bosch SF-A4.0125.030-10.071 Brushless servo motor Type: SF-A4.0125.030-10.071 12.5Nm 9.1A 3000 rpm Wavelength: 5cm Shaft diameter: 2,4cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

Relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -12 V 2x15 A -Price per piece -Number: 98x available -Minimum order: 3 pieces -Weight: 0.1 kg

Starter Bosch -Voltage: 24 V -Type: 000 1416 030 -Teeth: 11 -Weight: 17 kg

alternator -Type: 0986 031 190 -28 V -Weight: 5 kg

Starter -Manufacturer: Bosch -Voltage: 24 V -000 1416 002 -Teeth: 9 -Weight: 15 kg

Starter -Voltage: 24 volts

Starter Bosch -Manufacturer: Bosch starter type 0 986 011 140 -Voltage: 12V -Teeth: 9 -Magnetic coil: Type 0331402503 -Total dimensions: 290/190/H115 mm -Weight: 11 kg

Bosch 038035 power supply Power supply for Bosch drive amplifiers / transistor amplifiers of the SERIES TR10-2, TR15-2, TR20-2, TR25-2 Price: 1750 € Functional guarantee upon handover

Bosch performance card Available types: Bosch performance card 038028 suitable for TR10, TR15, TR20 Price: 1050€ Bosch performance card 047018 Price: 1050€ Bosch performance card 047532 Price: 1050€ Condition: fully functional and ready for use Functional guarantee upon handover --ᐳ Please indicate in the request which supply module you are interested in.

Bosch controller card Available types: Bosch controller card 038030 suitable for TR10, TR15 & TR20 DC output voltage: 230V Price: 1450€ Bosch controller card 041458 suitable for TR10, TR15, TR20 DC output voltage: 140V Price: 1450€ Bosch controller card 047115 suitable for Bosch drive amplifier / transistor amplifier TR10-2, TR15-2, TR20-2, TR25-2. 047115-1027, 047115-3027 Price: 1450€ Functional guarantee upon handover --ᐳ Please indicate in the inquiry which servo module you are interested in.

polishing grinder make BOSCH type 0601203003Mash. -No: 2260002Power: 230WSpeed: 50000 rpm.Power connection: 220 V / 50 HzCollet chucks: 3.0 mmWith- Pistol shape- wooden box- 18 grinding pinsunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Brushless Servomotor Manufacturer: Bosch Type: SD-B5.380.020-00.000 e.g. to use as feed motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com