boiler 10000 used for sale

Tank,rustfrit syrefast stål,dobbeltkappet,isoleret,røreværk,mandedæksel i top & side,Ø 2220 mm

Tank,rustfrit stål,liggende i vugger,koniske endebunde,mandedæksel i endebund,Ø 2000 mm.

Tank,rustfrit syrefast stål,stående på ben,mandedæksel i side,Ø 2250 mm.

Tank,rustfrit syrefast stål,stående på ben,mandedæksel i side,Ø 2000 mm.

Tank,rustfrit stål,røreværk og mandedæksel i side,vaskevinge i top,Ø 2000 mm.

Tank,rustfrit syrefast stål,mandedæksel og røreværk i top,45° konisk bund,Ø 1910 mm.

Tank,rustfrit syrefast stål,røreværk fra top,mandedæksel og CIP i top,Ø 2000 mm.

Tank,rustfrit syrefast stål,røreværk fra top,mandedæksel og CIP i top,Ø 2000 mm.

Tank,rustfrit syrefast stål,isoleret,mandedæksel i side,Ø 2200 mm.

Type: SR 1600/10000 Location: Czech Republic tour possible good condition

turning diameter over bed: 2000 mm turning diameter over slide rest: 1500 mm turning length: 10000 mm speed: 1,4 - 71 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.

There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, lantern, barrier pressure system and documentation, the tanks were used for 15 years.

Max. load: 16t, span width: 20m, lifting equipment: GM5000.16000

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Gathering machine DC 10000 S Currently in stock: 4 x DC 10000 1 x DBM 200 with TW 48 1 x DBM 250 with DBM 250 T 1 x DC 8000 as a spare carrier

Fully automatic Saddle stitcher Configuration: Fully automatic from feeder to trimmer • 1 cover folder feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating point • Stitching machine with wire feed gear • Trimmer with trimmer feed • Compensating stacker RIMA RS-14 Technical specifications: Maximum format untrimmed 320 - 350 x 460 mm Maximum trimmed format 340 x 450 mm Maximum cutting thickness (single use) 12 mm cutting thickness (double use) 1/2x punch knife width Maximum staple thickness 6 mm Maximum trimming front trimming 50 mm Maximum trimming head and foot trimming 50 mm Stitching heads max. 4 Hohner narrow stitching heads staple length of the vertical feeders approx. 250 mm (depending on the paper) Arch opening vacuum suction cups at least 6 mm rear fold, 8 mm front fold, Sheet opening gripper max. 20  ...

10000 liters diesel storage tank, tested as new.

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

We present a selection of high-quality dry transformers, including the 1600/20/04 and 2000/20/04 models. These transformers are designed for efficient and reliable power distribution in various industrial applications. Features: - Model 1: 1600/20/04 - Power: 1600kVA - Primary voltage: 20kV - Secondary voltage: 400 - Model 2: 2000/20/04 - Power: 2000kVA - Primary voltage: 20kV - Secondary voltage: 400V Properties: - Reliable performance: These dry transformers provide efficient and consistent power distribution to ensure smooth operations and minimal downtime. - High efficiency: The transformers are designed for energy efficiency in order to minimize power losses and optimize energy consumption. - Compact Design: The space-saving design allows for easy installation and flexibility in various industrial environments. - Durability: Constructed with robust materials, t ...

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stainless steel Capacity up to 10,000 kg/h

Cans De-palletiser cans De-palletiser for cans Overhauled: 2019 Small canning line up to max 10.000 cans/h With this speed an handle big pallets

Transnorm conveyor belt GF 10000-600-500 RA2108 Technical data: Conveyor length (NL): 10000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 10000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentr ...

x-travel: 10000 mm y-travel: 1100 mm z-travel: 1700 mm Control: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mm chip conveyor: universal head: table height over floor: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container Size With Actual Configuration: 1 l // Number Of Heads: 8

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system, construction vacuum cleaner, dust separator -Manufacturer: Dustcontrol, extraction system dust separator type DC 10000 -Side channel blower Dustcontrol TED 30.055 -Individual components: see photos -Dimensions: 1060/570/H2240 mm -Weight: 192 kg with pallet

Stainless steel tank, stainless steel tank, silo system, tank, fertilizer storage silo -Tank: made of stainless steel -Capacity: approx. 10000 ltr -Fill and drain fitting -Outlet height: 310 mm, dimensions see photo techn. drawing -Dimensions: Ø1975 x 3940 mm -Weight: 500 kg

Container turning device, welding turning device, roller block, rotators, pipe straightening system -Roll diameter: O 160 mm -Electronic drive: adjustable -Manufacturer: APS Typ -Load capacity: max approx. 3000 kg -Speed: min. 80 mm / min -Speed: max. 2000 mm / min -Foot switch -Admission of pipes to be welded min .: O 250 mm -Acceptance of pipes to be welded max .: O 2000 mm -Laterally adjustable castors: 400 mm - 805 mm -Counter bearing length adjustable on: Rail system -Transport dimensions: 2070/2000 / H1110 mm -Own weight: 1219 kg

1 x Used 3 meter stroke Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not deductible .

Maximum turning diameter: -over bed 1600mm Maximum weight of piece between swings 40000 kg Main spindle revolution domain 1,5 - 250 Feed domain longitudinal and transversal 1- 3000 Distance between swings 10000mm Main motor power 60kw Fanuc Machine is equipped with 4 linets, milling and grinding devices. Last edition CNC Fanuc equipment. Delivery time: 2 months. Please send request for more technical details, price and photos.

The booklet production line consists of: Gathering tower DC-10000S with 10 suction stations format A3/A4/A5 Staple and folder DBM -250 with automatic format setting with stitching heads Hohner Trimmer DC – 48TW Compressor

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

Film buffer silo: 10000 litres, geared motor: 2.2 KW (3 hp). With remover.

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting edge solution in the liquid thermal treatment sector This machine meticulously designed by UDMACHINES is a model PAS 10000 45 2P E It s distinguished by its operational efficiency and precision setting a new standard in the industry Key Characteristics UDMACHINES known for their innovation manufactured this Used Flash Pasteurizer in 2022 making it a relatively new addition to the market Importantly it boasts a remarkable operational capacity of 10 000 liters per hour This capacity is a testament to its significant efficiency especially in handling large volumes for treatment Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method a critical feature Specifically it rapidly heats liquids to 90 C This process is not ...

General SKU287P477 LocationBarneveld MakeSchallex Apparatebau GmbH (D) Type10000 ltr No.14956 Year of construction1990 Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity10000 ltr Vessel sizesdia. 2000x3500mm Dished topcheck Dished bottomcheck Manholein side wall, dia. 600mm Top connectionsDN65 (2x), DN50 (1x) Outletdia. 80mm Max. temperature70 degr. C Internal heating spiral(3 ltr.) Max. temperature90 degr. C Information Mounted on legscheck Floorspace2,5x2,5 M Total height5,4 M Weight1800 KgVertical tanksSchallexTanks > Vertical tanksBrand > Schallex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You  ...

General SKU345S713 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1251 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 Ltr. (15175 Ltr.) Vessel sizesdia. 2400x3440 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN100, DN80, DN50, DN25 OutletDN80 Half coil jacketedcheck (340 Ltr.) Max. temperature-25/130 °C With paddle stirrercheck (HWL80-D) Motor15 kw, 400 Volt (EEx de IICT4) Speed mixing shaft71 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,6x2,6 m Total height3,5 m Weight4200 kg ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSo ...

General SKU213T163 LocationBarneveld Main Features MaterialStainless steel Volume13000 Ltr. Motor3 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity10000 Ltr. Vessel sizesdia. 1700x4800 Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsDN50, DN80 Outletdia. 36 mm With paddle stirrercheck (EKATO FLUID EM 2060) Motor3 kW 380-415/660-720 Volt (Ex) Speed mixing shaft19-93 rpm. MaterialStainless steel Information Floorspace1,8x1,8 m Total height6,6 m Weight1400 kg ATEX compatiblecheck Extra SpecificationsINCLUDING NEW MECHANICAL SEAL Stirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

Key data: 10000 mm, 3000 mm, 2000 mm

Inv. Num. : 7444 Type: FC 10000 CNC 5X Producer: SAHOS Created: 2008 Parameters: Control system: HEIDENHAIN Spindle drive power: 22 kW X-axis travel: 10000 mm Y-axis travel: 3000 mm Z-axis travel: 2000 mm Maximum feed speed axis X: 60 m/min Maximum feed speed axis Y: 30 m/min Maximum feed speed axis Z: 30 m/min Machine weight: 14,500 kg

Key data: 1000 kN, 6947 g/PS, 120 mm

Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm

B&A REF: 8968 TON: 1000 SHOT WEIGHT: SCREW DIAMETER: 100MM STROKE VOLUME: 3925CM3 INJECTION PRESSURE: 1670AR PLATEN SIZES: 1800 X 1580MM DBTB: 1250 X 1000MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 1100MM MAX DAYLIGHT: 2300MM EJECTOR STROKE: 400MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP SCREW DRIVE: ELECTRIC

General SKU245P288 LocationBarneveld MakeAsca Metallwarenfabrik Behälter- und Apparatebau (DE) No.2015 Year of construction1997 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor33 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10.000 ltr Vessel sizesdia.2200mm x3000mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connections(2x)DN300, (3x)DN100, (3x)DN80 OutletDN100, with valve With jacket900 ltr Max. temperature160 degr C With propellor stirrercheck With dissolver stirrercheck Motor8/33 KW,400 Volt Speed mixing shaft160/320 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace3,0x3,0 M Total height6,0 M Weight6500 KG Extra Specificationswith Ekato EM 2100 agitatorMinerals & inorganicAPIPlast ...

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Turbine Operating Hours of Turbine: 30.000h Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW, Revolution number: 23000 U /min, Live steam pressure: 65 bar, Live steam pressure temperature: 480 °C, Evaporation pressure: 1-17 bar, Investments in the year 2002 , Entire steam transforming station from 63 bar to 2,5 bar in the year 2002 renewed, El. Generator Fa. Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA, renewed, Entire measuring -, governing and control of the turbine renewed, Steam turbine renewed with Energy Production Installed boiler efficiency: Boiler I , Hard coal, Steam generation: 20 t/h, 63 bar, 495 °C Boiler II , Hard coalr Steam generation: 13 t/h, 34 bar, 425 °C Boiler III: , Combination burner for oil and gas, Steam generation: 20 t/h, 17 bar, 285 °C General overha ...

We sell a Czwaluk lift truck here. This lifting tipper was designed and built by us. The frame is made entirely of stainless steel has a maximum load of 600kg, a tipping height of 2800mm with a tilting angle of 45., This lifting tipper can be manufactured for you according to your wishes. Whether tipping height or boiler fork , anything possible.

1999, HOR. FRUIT PRESS, BUCHER, MPX-100, REFRIGERATION UNIT, BITZER, R-134A, CENTRIFUGE, VACUUM FILTER, STEAM BOILER, EVAPORATOR ETC.

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...