blown used for sale

Complete Working Melt Blown Plant Consisting of: 1 Mm 65 Extruder With 6 Heating Zones 1 Extruder Head 1 Vacuum charger 1 carpet and carpet turner 1 Reel With Meter Counter And Material Cutting 1 Electrostatic Load Control Unit And 2 Electrostatic Bars 1 Air Compressor 22kw + Soundproofing Cage 3 Dies Holes 0,20 Miss 600 Mm 1 Pyrolysis Oven X Die Cleaning 1 Ultrasonic Tank For Die Cleaning 1 Aspirator Behind The Mat For Melt Blown Formation 1 Complete System With Suction Hood And Pipes

Gottfert blown film extraction unit

Key data: 75 mm, 24

Blown film extruder for mono films TOP version Manufacturer Alpine BJ 1989 has already been partially modernized. Screw length 24d Screw diameter 75mm Blowing head BF 14-36 internal cooling from Alpine Cooling ring HK 300 with peak Output approx. 175 kg depending on the product Film thickness 12my – 50my Dosing Dosing unit with 4 volumetric feeders Winder Kuhne 1300mm Tandem Pre-treatment available 1 time Slotting device is available Flat laying 840mm – 1200mm Thickness measurement is available

See PDF attached

Line includes (1) Material Dosing Iveca (2) Extruder Windmöller & Hölscher (3) Blow Head Windmöller & Hölscher (4) Die Windmöller & Hölscher, diameter: 200mm (5) Film Cooling Windmöller & Hölscher (6) Calibration Basket Windmöller & Hölsche (7) Flat-Lay Unit Windmöller & Hölscher (8) Haul-Off Windmöller & Hölscher (9) Winder Svend Knudsen (10) steel construction, operational hours counter: ca. 7000h, with documentation, the line was only used for testing purposes.

1、Product size: PP melt blown fabric with width at 500mm(after trimming 175mm2pcs) 2、Main Material: PP compounding material(we will supply formula and operation video after order) 3、Extruder type: SJ65/30 single screw extruder 4、Output capacity: 300-400kg/24hour (24hours) 5、Electric power supply: 3phase, 380V;50Hz(customized) More data available if needed

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

BIELLONI BLOW FILME LINE, xtrusion line with screw diam. 80 mm, die diam 180 mm., n.2 cooling rings, calibration cage, oscillating pull off unit 1.200 mm.wide, for LDPE LLDPE HDPE (in blends) from 18 to 170 my, as is or reconditioned, screw diam.: 80, die diam: 180, wider: double 1200 mm.

General SKULU001 LocationNetherlands MakeALTOP kunststoftechniek TypeScrubber Stripper combi skid Year of construction2017 Main Features Capacity3000 Ltr./Hr. Specified Features - Scrubber CapacityStripper liquid: 3,0 m3/h, Air flow: 7200 m3/h, Ammonium 9,9 kg NH3-N/h Vessel sizesStripper Dia: 1000 mm Number of columns:1c stripper, 2pc scrubbers With stirrerflux mixer With pumpcheck Information With switchgearcheck Total height8,0 m CEcheck Floorspace6,0 x 3,3 m Extra SpecificationsThe system consists of the following main components: - Scrubber 1 - Scrubber 2 - stripper vessel - Process water supply by means of valve ABV403 - Acid dosing by pump PU501 - Ammonium sulphate removal by pump PU303 Objective: neutralise ammonia vapour generated in the stripper. Sulphuric acid dosing will convert ammonia into ammonium sulphate. The ammonium sulphate will be pumped to an ext ...

M. No. : 6064/11 6708 Equipment / Additional information: Working width: max. 550 mm Product transport: 5 pieces flat belts - transport elements Departmental equipment: 5 pieces breakout elements with blown air Speed: 1 - 165 m / min, infinitely adjustable Mobility: mobile with wheels and feet

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...

brochure system Manufacturer: FKS Model: Duplo 5000 year: 2008 Counter total: 780656 2x FKS/ Duplo gathering machine DC-10-60 1x transfer unit LUL-HM including dowry compartment and manual system/ -insert 1x FKS/ Duplo bridge between the towers 1x FKS/ Duplo brochure machine DBM-500 1x FKS/ Duplo front trimmer DBM-500 T 1x FKS/ Duplo long tape delivery DBM 500 LS 1x blown air support for stitching station 2x ring eyelet stitching heads 1x DBM-500 P booklet repress unit 1x short cover kit 1x FKS/ Duplo pallet lowering table STR (right display) Price: on request

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

Trotec Speedy 400 Co2 Laser 80 Watt air-cooled Year of construction: June 2015 • Immediately ready for use • 6 months warranty on all machines Working area: 1,016 x 610 mm Max. workpiece height: 305 mm • Only 2853 operating hours Scope of delivery: • Trotec Laser Speedy 400 year 2015 • Software JobControl 11.4 / Ruby incl. license key •Connecting cable • Aluminum lattice table • Lens cleaner • Lentil cloths • Allen key set • Lens set •Manuals On request: • Unwinding device • Trotec extraction • Slat table • Engraving table • Honeycomb grid table • Training and commissioning • Delivery by transport company Dimensions: width/depth/height (approx.) 1400 x 950 x 1070 mm Air support: By using an air compressor heat and gases are removed from the cutting surface blown away, resulting in a better cutting result can ...

Description Piab 6010A vacuum pump replaces conventional compressors up to a size of 100m3. The patented vacuum pump is a smaller, more effective and reliable solution for vacuum generation. It is easy to install and can be adapted to your specific application requirements. Because the pump contains no moving parts, there is virtually no wear. In addition, no heat is generated, which avoids the static charge of the paper. Further advantages are the compact dimensions, the quiet operation and the low energy consumption. System completely pre-assembled. The pump always consists of a blown air and a vacuum side. Since the performance is individually adjustable, any compressor size can be replaced with a Piab vacuum pump.

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Filter housing with filter cartridge PAGUS Connections: 3/8 Filter cartridge: LT-PPBB-010-9 Filter fineness: 10 μm Filter diameter: 28 / 63 mm Filter length: 250 mm ( 9,00 mm 75) Filter material: Polypropylene (PP) melt blown suitable replacement filter cartridges see FI125 ! used, Filter cartridge unused ! Dimensions: 300 x 180 x 115 mm

TMS 65mm blown film extruder, complete with frame and new screw scale to be assembled, ABB motor overhauled in September, machine stopped in November, video available in operation, pulling and collecting mm.850, production around 120 kg/h.

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

Blown extrusion machine for containers up to 0.5 liters. of capacity in polyethylene and/or polypropylene. Spindle diameter 45 L/D 24. A station. Single output head with MOOG thickness regulator with electric servo actuator. Automatic deburring. Delivery ordered by extraction clamp. Incandescent cut. In January 2020, the entire maneuver was migrated with the replacement of the PLC, Touch Screen (both Siemens), temperature regulators (Omron) and output relays. PLC Program and Display accessible.

This listing includes the following components for Fiber filling machine/pillow filling machine: 1. Foam Shredder Model:FX- 001 Capacity: 40-50 kg/h Voltage : 380v/50hz/3phase Power: 4kw Size:681×596× 1178mm Weight: 80kg 2. Fan with T-joint- Transfer your raw material to the Mixer machine 3. Cotton filling machine: Model: FX-1500 Voltage :380v Power : 1.5kw ＋2.2kw Size:150011002050mm Weight:330KG Cotton outlet number :2 Air pressure:0.7-0.8MP 4. Filling Pipes- 12,16,19,28,38,53,61 mm 5. Filling machine - Filling your raw material into your product Filling machine is produced in China and shipped in Europe, Bulgaria, all duty fees paid for European Union. Machine is installed on site for testing the work of it. Worldwide shipping may vary depending on Country. Please feel free to ask any questions1. Brief introduction of the cotton filling  ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Unrenovated blown film line directly from production, make extruder Alpine HS 75 L/D 24, with 4 volumetric dosing stations, die head tool type BK 14-36 IBC, cooling ring HK 300 with peak, capacity up to 175 kg/h, film thicknesses variable depending on polymer, for HD-PE 12 ym – 50 my, corona treatment, film slitting knife, thickness measurement, film flattening, film widths 840 – 1,200 mm, tandem winder made by Kuhne, the technical equipment has improved over the years. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWClamping System DIN ISO 7388-3-A, ADSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmSpecial equipmentSwivel rotary table capable of simultaneous operation Clamping surface D505 x 500 Swivel range -35 to +110°, 360° rotation axis including direct measuring systems B and C axis and level transformation Tool magazine 60 places SK40 Vertical chain with douSpecial equipmentWork area flushing Flush strips on the right side wall, Machine bed rear, cabin left and right front Working ...

Thermofin TCD Condenser V-Shape Double Block Ideal for large power requirements with a small footprint, grouping of several devices in one group The condensers of the Thermofin TCD series are characterized by their high nominal capacity and adopt a comparatively small footprint. The air is sucked in from the side and blown upwards. The noise level, which is often decisive for outdoor installation in special environmental conditions, is thanks to the use of the latest generation of fans. Manufacturer: Thermofin Type: TCD 080.1-28-L(D5) Power: 753 kW Number of fans: 16 Speed: 680 1/min Voltage: 400 V Motor power: 16 x 1.05 kW Material Pipe Block: CU Surface: 3766 m2 Size: 10560x2200x2350mm (LxWxH) Weight: 3500 kg Re: weight: 4500 kg Year: 2000 Documents: Datasheet Assembly instruction More items in other sizes - new and used - can be found in our shop! Int ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Description Single layer blown film line Screw diameter 80 Die 180 Nr. 2 cooling rings Rotating haul-off Twin winder width 1200 Thicknes LDPE from 18 to 170 micron

Description Extrusion and blow molding plant for the automatic production of hollow thermoplastic bodies Max blown container volume: 10000 cm3 Dry cycle: 2.8 sec Closing force: 15 tons Max opening: 600 mm Opening stroke: 300 mm Screw diameter: 90 Screw length: 22

Description Single layer blown film line Extruder diameter 105 L/D 30 Extrusion head with die 500 Dosing units DS&M Still haul off Twin winder working width 2200

Used Filling Triblock GAI 12 1 16 1 16 Valves 2500 Bph Rinsing machine with 12 grippers applying a single treatment of air blown on the bottle mouth before straightening Carousel grippers manually variable in height 1 1 head station for vacuum and gas injection before the filling machine with variable head in height 2 Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1 capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2 500 bph with the 0 75 Ml [...for more information send your inquiry to the seller.] refno: M121

Used PET Complete Bottling Line for Water Description of the Used PET Complete Bottling Line for Water revised in 2018 This Water bottling line can work with both PET and glass containers In this configuration we only have the complete PET line but we have the filling triblock that can work with both plastics and glass therefore in the future if you want to make glass work too just introduce some machinery and you can also make this type of production in this Water bottling line The Water bottling line can process both still non carbonated and carbonated water Therefore if shortly the owner decides to also produce carbonated water just introduce a saturator and it will be possible to start producing water with gas as well in this Water bottling line How this line is composed Used PET Complete Bottling Line for Water 1 SIPA blower 8 linear cavities complete with nr 2 molds lt 1 5 and 0 50 ...

5 Sormac peelers available, available Q2 2024, Onion peeler USM-S100, The Sormac onion peeler USM-S100 combines easy operator use with a good reliability. The operator has within reach a rotating, mounted display panel with all the important functions at there disposal. Also shown is important information like capacity, number of peeled onions, operating hours and malfunction identification.By means of a singulating chain the onions are transported from the infeed hopper and positioned onto the flights of the transport chain. The operator places the onions in the right horizontal position. The rotating knives top, tail and cutting arms make a horizontal cut around the onions., At the end of the conveying section the onions are picked up with a double holding-arm system with rotating holders., This arm is fitted on a rotating structure. During the rotating movement the onion spins around  ...

General SKU354T965 LocationBarneveld MakeUS Roaster Corp. TypeCoffee roaster No.1217 Year of constructionunknown Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Motor0.55kW, 230/500 Volt Information Total height1,9 m Weight910 kg Floor space2x2 m Extra SpecificationsThis coffee bean roaster is electrically heated. Six heat spirals are mounted under the drum, with the hot air rising and being exhausted by a fan through the mixing chamber and blown off to a cyclone. The coffee roaster can be filled through the hopper. When ready, the beans can be unloaded by manually opening a valve. The beans enter the cooling vessel with grid. The built-in blower blows cool air through the beans. The vessel is fitted with an agitator to cool the beans evenly Product chamber size: Dia:450 x510 mm Feed hopper: 400m ...

Flow Pack format packaging machine, Auriga 500E brand. NEW, HAS NOT BEEN LAUNCHED DUE TO CESSATION OF BUSINESS. Machine structure in painted steel RAL 9006, machine protections and enclosures in AISI 304 STAINLESS steel. - All the mechanics of the machine are in the lower part, protected to avoid dirt. - Pallet entry belt, length 2,100 mm, payload area 1,400 mm, guided side on the loading belt. - Quick change input paddle, parts made of plastic material. - Manually height-adjustable longitudinal welding group, consisting of two sets of 120 mm diameter wheels, the first cold wheels, the second hot wheels, blown Air welding cooling and cold third wheels, wheel opening pneumatics. - Transverse welding group with rotary movement, width 240, open-close control pneumatic clamp, welding clamp 12.5 ms. - Product anti-entrapment system in jaws. - Machine with 3 independent motors,  ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

travel -x axis: 1.250 mm travel -y axis: 880 mm travel -z axis: 800 mm control: HEIDENHAIN turning speeds: 10.000 U/min numbers of positions in the tool changer: 120 tool taper: SK50 5-axis simultaneous machining center | DMG - DMC 125 U equipped with automatic B-axis Equipment/accessories: - 4 pallets - Handwheel - Blown air spindle center - Measuring probe: TS 641 The machine is in a well-maintained condition and can be inspected at any time under power. Please find further equipment information about this machine in the original documents included in the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC125U | DMC-125U | DMC 125U | DMC125 | DMC-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Single Layer Blown Film Line Material: LDPE and COMPOSTABLE Film working width: 600 / 1.600 mm. Die diametter: 100-200-300 mm. – air gap=1,4 - Blow Up Ratio (BUR) =1,5-4,5 Film thickness: 30 / 200 μ Thickness tollerance: sigma 2 ± 8% Production: 100 / 160 kg/h (with ambient temperature at 25° C) the flow rate can vary according to the thickness of the film, the width of the tube and the type of raw materials used Maximum production speed: 80 m/min Finished reels maximum diameter: 1000 mm Cardboard mandrels diameter: 3" (internal diameter) Twin winder type BA-2/1800 Line total height: 9 m