blow injection used for sale

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 500 A Suction capacity: approx. 500 m ³/h Cat. No.: PP W31 001 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

The blower is refurbished and can be supplied as a complete unit.

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

The fan is installed in a soundproofing hood completely, the stage is refurbished.

V1 0.85 cbm/s =, PT = 52.3 bar, 15 / 60 °C, n = t1 = 2.910 rpm, 1 = P1, CC, PW = 5, 58kW 198 kg/m, electric motor 7.5 kW

The fan speed is refurbished, can be supplied as a complete unit.

The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.

The fan speeds are reconditioned, can be supplied as a complete unit.

Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

Sidel SBO 2F Blowmoulding machine Sidel with 2 molds of 2,400 bottles per hour, the condition of the machine is also excellent.

The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed

The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed

including 8 molds of Lt.1,5 and Lt 1, high pressure compressor 40 bar SIAD,

Single head Capacity : 5 Liter- 10 Liter Machine can be seen in working condition

Blow molding machine SIAPI mod EA 6,000 PET bottles / h. Stamens for 0.5l, 1l, 1.5l and 2l formats. Overhauled and working

A machine for the production of PET bottles from 0.2L to 2L In good condition, the opportunity to see the bottle maker at work, Complete with mold

Krupp Kautex Blowmoulding Machine Mono layer Double head One station Machine has been fully revised mechanically and also PLC revision in 2008 Machine is in working condition

PET preform blower up to 6 liters 1 cavity Maximum bottle diameter 170 mm Maximum bottle height 345 mm Production 800 BPH Installed power 33 Kw

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.

1 used stirring and whipping machine Manufacturer: Boku (Diosna) Type: RS incl. 3 kettles and 3 brooms! serviced and checked! with great digital control! Machine runs very quietly! Viewing and test run possible at any time! Sold only to professionals. Only the written purchase contract is binding! The brands and characteristics mentioned here are only used to describe the product. If you have any questions, please feel free to call or send an email at any time! The machine can be supplied by our own fleet of vehicles (at a cost), or sent via freight forwarder! It is also possible to organise a commissioning with a master baker! In accordance with EU law, we would like to point out that we do not assume any guarantee, warranty, liability for material defects or the like. This does not affect damages due to intent or gross negligence.

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit

• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14

p1=1.0 bar, p2=1.4 bar Speed: 1470/2940 rpm Power: 7.4/12.2 kW, incl. silencer and frame construction

Equipment / Additional information: 200-240V 50/60Hz

Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition

We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K70R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.

We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K80R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.