bizerba sc used for sale

75.0 kW, 7.5 bar, 11.30 m3/min

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

250 kW, max. 8 bar, 35 m3/min.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

Tire houses screw 90 mm - 25 l/d many more screws available from stock, some as good as new

250 kW, max. 7.5 bar, 34.3 m3 rpm, oil-free, air-cooled.

132 kW, max. 7,5 bar, 24,2 m3/min, New srew.

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

Scania AT-Motor DC12 pump nozzle c.350Kw completely ready for installation without starter+alternator-for emergency power +CHP applications. info@miw-zeven.de

110 kW, max. 8 bar, 15.5 m3/min.

Facade scaffolding system Layher Blitz 70 and Compatible Large used item and compatible new material in stock BOM on request

160 kW, max. 7.5 bar, 27.4 m3 rpm, built 1998.

160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.

Excenter screw pump Fabr. Cheeks, Type 60.4 R-ST

132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.

75 kW, max. 10.0 bar, 10.35 m3/min.

Scania Austausch-Motor Typ= DI12-54A-PDE-Steuerung 242KW Aldrehzahlmotor incl.Anlasser,Lichtmaschine.Auch für Pflanzenölbetrieb geeignet. info@miw-zeven.de

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de

Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25

in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm

55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991

Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.

500 kW, max. 7.5 bar, 83.1 m3 rpm, oil-free, very good condition, with suitable atlas Copco MD 1800 dryer.

200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.

90 kW, max. 8 bar, 16,10 m3/min. Total hours: 13719 Loaded hours: 7703 Condition as new.

315.0 kW, max. 8.0 bar, 46.44 m3/min.

315,0 kW, max. 8,0 bar, 46,44 m3/min.

160.0 kW, max. 7.5 bar, 28.26 m3/min.

55.0 kW, max. 7.5 bar, 7.60 m3/min.

160,0 kW, max. 7,5 bar, 28,26 m3/min.

55,0 kW, max. 7,5 bar, 7,60 m3/min.

200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.

200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.

75.0 kW, max. 9.8 bar, 11.05 m3/min.

75,0 kW, max. 9,8 bar, 11,05 m3/min.

90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.

90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

315.0 kW, max. 10.0 bar, 45.70 m3/min.

315,0 kW, max. 10,0 bar, 45,70 m3/min.

30,0 kW, max. 7,5 bar, 4,86 m3/min.

75.0 kW, max. 7.5 bar, 12.60 m3/min.

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

55 kW, 8 bar, 9.10 m3 rpm with dryer