bio fuel used for sale

C350 D5 Open A019J715 Genset Model C350 D5, 350kVA Standby, 320kVA Prime, NT855G6, Diesel, Open Emergency Standby Power (ESP) Emission Level; No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NT855G6 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HCI4E, 50Hz, 12 Leads, 380-415V, 163C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 630A, 690V IEC, 600V UL, 4Pole, End  ...

C500 D5 Enclosed Genset Model Item      C500 D5, 500kVA Standby, 455kVA Prime, 0, 0, QSZ13G5, Diesel, Enclosed      Emergency Standby Power (ESP)      Emissions Level : EU SII      Local Codes and/or Regulation : CE      Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine      QSZ13G5      Engine Air Cleaner - Duty Rating : Normal Duty      Engine Speed Governing : Isochronous Electronic Governor      Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts      None Supplied Main Generator      HC5C, 12 Leads, 50 Hertz (Hz), 190 - 220V and 380 - 440V, 163C, Emergency Standby Power (ESP)      Generator Accessories      Voltage Regulator - Torque Match      Main Generator Heater : None Supplied Genset Housing      Sound Attenuated, Steel, Munsell Green Exhaust System      Silencer Grade : Enclo ...

C550 D5e Enclosed A029Z751 Genset Model C550 D5e, 550kVA Standby, 500kVA Prime,QSX15G8,Diesel,Enclosed Emergency Standby Power (ESP) Emission Level,No Certification Local Code and/or Regulation,CE Output Voltage,400/230, 3 Phase, Wye, 4 Wire Engine QSX15G8 Engine Air Cleaner-Duty Rating,Normal Duty Engine Speed Governing,Isochronous Electronic Engine Coolant Heater,240V Main Generator HC5D,50Hz,12 Leads,200V & 400V150C,Emergency Standby Power (ESP) Voltage Regulator,Torque Match Main Generator Heater,None Supplied Genset Housing Sound Attenuated,Steel,Munsell Green Cooling System Genset Mounted Radiator,50C / 122F,Genset Mounted Engine Coolant Mixture,50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device-1 800A,690V IEC, 600V UL,4 Pole,100%,Left C ...

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

CHP with John Deere gas engine and 70 kW of electrical power New exhaust gas turbocharger Control AMG 2 with leanox control Synchronous Generator Stamford 70kW Complete with frame,sound hood Automatic oil refilling with internal silencer and exhaust heat exchanger Operating hours approx.42,000 Suitable for biogas and natural gas

FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Dear's Sale, used 2 complete engine Deutz SBA8M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 ...

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...

DEAR'S SALE, HITACHI MAN 35MCE SPARE PARTS FULL COVER, LINER, PISTON, CONROD, 4CYL CAMSAFT, PIPES, FUELPUMP ANY PARTS Brgds Hakan KUSCU +905323642509 info@kscege

Dear's sale, Wartsila 16v25 engine complete spare parts inc block and cranksaft full cover, piston, liner, conrod, fuelpump etc... built 1997 brgds Hakan KUSCU info@kscege.com

Execution: unit type: mobile version: Schallgedämmt technical data motor: motor manufacturer: one motor type: D 2842 LE engine power: 424 KW cooling: water-cooled starting: electric 24 V DC speed: 1500 rpm fuel: fuel oil EN 590 Technis Che data generator: generator manufacturer: Ansaldo FKI generator type: M 7B 316 LD 4 generator power: 525 kVA voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: peak-load operation switch: generator switch 3 pin delivery: built tank: execution: double-walled litres: 1,000 dimensions of the unit: width approx. mm: 2350 height mm: 3.260 length mm: 9.230 weight KG: 10,600 use: State: well get built: 1992 delivery: immediately Verl price net in â?¬: on request: hours of operation: 701 location: Verl - Germany

S07 - used approx. 20 m³ / 20,000 litres steel tank, double-walled, underground tank, fire-fighting water tank, water cistern. In good condition, double-walled steel tank, lying horizontally, underground storage tank, water tank, diesel fuel tank, heating oil tank. volume: approx. 20 m³ / 20.000 litres material: steel tank length: approx. 6.00 m diameter: approx. Ø 2.00 m weight: approx. 4,0 t Outer side with bituminous insulation or bitumen coating. Used storage container, emptied and professionally cleaned inside. According to the age traces of use are present. Lightest damage and small dents to the insulation due to the excavation process. The tank is fully functional. This steel tank can be used as a storage container for many different media. On demand we can also modify it as a fire-fighting water tank, just ask us. Price upon request. Transport c ...

Description Brand JUNGHEINRICH Model EJE 116 ID 102658 Status Active Price 1.200 € + VAT Year of manufacture 2011 Fuel Electric Working hours 2.263 ore Location Oradea (RO) Jungheinrich EJE 116 - Technical Specifications Nominal load at COG: 1,6 t Wheel base: 1,255 m Standard tyres: 1 x + 2/2 Equipment dimensions: L x W x H 1,644x0,72x0,797 m COG: 600 mm; Lifting height: 0,122 m; Traction motor: 1 kW; Hoist motor: 1,2 kW; Battery capacity: 24/150; Net weight: 0,439 t; Batt. weight: 0,151 t; Travel speed with / without load: 6 km/h; Hoisting with / without load: 0,04/0,05; Lowering with / without load: 0,05/0,04; Max. climbing ability: 10/20 %; Turning radius: 1,44 m; Disclaimer: These specifications might not be an exact match for this machine model, in which case they should only be used as guidelines. ExWorks. Price is negotiable. Contact Tel.: + ...

RECON - with cooled exhaust seat rings - heavy fuel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Gemini type 4000 BJ. 11/2007 8000mm longitudinal career 2 x oxy-fuel burner 1 x plasma support preparation Workspace 3500mmx6000mm without filter system without firing tables. Commissioning on request

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Dear's Sale, Man B&W K45GF engine spare parts Cover, Liner, piston, conrod, fuel pump etc Brgds info@kscege.com

GS10 - used approx. 100 m³ / 100,000 litres double-walled steel tank, water tank, firefighting water tank, fuel oil tank. In good condition, horizontally lying storage tank, steel tank, former heating oil tank. capacity: 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616D dimensions: Ø approx. 2.90 m x length 15.8 m weight: approx. 17.0 t manufacturer: Thyssen safety tank bitumen coating outside The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. Minor insulation damage caused by transport may be present. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

Description Brand GPG TECHNICAS DE PANIFICACION SL Model GFH-60 ID TR296 Status Active Price 1.300 € + VAT Year of manufacture 2009 Fuel Altele Location Oradea (RO) Gas heat generator for baking ovens GPG GFH-60, 2009, designed for STATIC furnaces from the same manufacturer. Heat exchange is based on thermal fluid (Marlotherm SH). Heat output: max. 80,000 kcal / h, fuel: gas, operating mode: automatic, direct monitoring, max. operating pressure: 4 bars, maximum temperature: 3500C, thermal efficiency: 85-90%. Connection type: DN-50 / PN-16 DIN 2633. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )  ...

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Dear's Sale, used 2 complete engine Deutz BA6M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Dear's Sale, used 2 complete engine Wartsila 12V32 Also, cover, piston, liner, conrod new/used, fuel pump, 12cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Surface disinfectant ready-to-use solution (ethanol- / isoporpanol-based) in 5L canisters for surfaces - Eliminates 99.9% of bacteria, fungi, germs and special viruses (H1N1,H5N1, Grippale Infections, Influenza, COVID-19 and Diarrhea) Technical data: Container: 5L canister Pieces: 300 Origin: Germany Smell: alcoholic (without addition of fragrances and dyes) Colour: clear-transparent Density at 20 degrees: 0.90 g/cm3 Water solubility: easily soluble Ph value: 7-8 UN number: UN1993 Active ingredient content per 100g product: 55g ethanol & 16g 2-propanol Registered and approved quality product from Germany. Opinion on the efficacy of the disinfectant in Sars-CoV-2 infections: Based on the VAH publication of 12.03.2020 "Notes on the efficacy and manufacture of disinfectants from 2-propanol and ethanol based on the general decree of BAUA against the background of the ...

Dear's Sale, used 2 complete engine Skoda 27.5 with R/G Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Dear's Sale, used 1 complete engine Mak 6M552AK Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Year of manufacture: 2004 Engine: PSI 4.3 L., 6 cylinders, 133 K. M. Drive: 4 x 4 Fuel: Propane/gas Transmission: Automatic Water tank: 936 L. Snow tank: 2.91 cm3 Weight: 3190 kg. Condition: excellent

Fuel oil tank, diesel filling station, tank plant, service filling station, steel tank with 100,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, the dome lid sanddowns and fit ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...

-Emassing 2m long; 1.3m wide; 1.1m high -400V; 50Hz; 10kVA; 35A -11.5KW Qvcdc9vbp -Pneumatics 6bar -grinding belt 300mm wide; 4088mm long; -Speed 15-30 m/s -ca 77 dbA -Wet grinding direction 0.24kW; 90l/min -Fuell quantity 115liter -Weight 250kg

Cooling tower Gohl DT63Z, open system, approx. 600KW recooling capacity, incl. control for desalination and biocide, Bj 2009, good condition,

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

Item Combined duo burners, gas and oil operated Fabr.: Steinmüller, type 1: G-18-K 1120/800, type 2: DAG-18-K 1120/800, y.o.m.: 1996, Burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1,500 Pa, exhaust temperature 424 degrees, (8 units), Burner data Duo oil burner: calorific value 42MJ/kg, heating oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner working area 1:5, max. Oil pressure on the takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burners must be dismantled by the customer. The burners can also be purchased individually.

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...