beth filtration used for sale

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Grinding length: 650 mm Grinding width: 230 mm Grinding height: 350 mm Wheel diameter: 225 mm Spindle power: 1 kW MACH-id      5557 MAKE           OKAMOTO Japan TYPE            ACC 52 EX YOP               1999 SPECIFICATIONS X - Travel       650 mm Y - Travel       230 mm Z - Travel       350 mm Table Length        550 mm Table Width        200 mm Table load         100 Kg Grinding stone dimensions          225 x 20 x 50,8 mm Power         1,5 kW Speeds         2800 Rpm Coolant system          yes DIMENSIONS Length  ...

Grinding length: 4000 mm Grinding width: 1100 mm Grinding height: 1000 mm Wheel diameter: 500 mm CNC Brand: Fagor CNC Model: 8055 MACH-id    5133 MAKE        Danobat Spain TYPE           RT 4000 SP YOP              1987 / 2019 SPECIFICATIONS Control       Fagor 8055 Cylindical / Surface / Other        Surface grinder X - Travel           4000 mm Y - Travel           1100 mm Z - Travel            1000 mm Electro magnetic table        4000 x 1000 mm Grinding wheel size            500 x 100 x 203,5 mm kW power on spindle          20 kW Speeds / ranges    &nbs ...

Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...

Grinding length: 800 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 7 kW CNC Brand: Fanuc MACH-id   4302 MAKE        Okamoto TYPE          ACC 64 CA1 YEAR          2009 SPECIFICATIONS Controll       FANUC Cylindical / Surface / Other      Surface X - Travel      800 mm Y - Travel      440 mm Z - Travel      500 mm Electro magnetic table       600 x 400 mm Work piece weight         1000 Kg Grinding wheel size         405 x 127 x 50 mm kW power on spindle      7.5 kW Spindle speeds / ranges      2800 Rpm Coolant / Filtration /    Yes DIMENSIONS Length ...

Grinding length: 950 mm Grinding width: 440 mm Grinding height: 500 mm Wheel diameter: 0 mm Spindle power: 3000 kW CNC Brand: Fanuc MACH-id    4104 MAKE       OKAMOTO Japan TYPE         ACC 95 EX YEAR        1998 SPECIFICATIONS Controll        FANUC in 2 Axis Cylindical / Surface / Other      Surafce grinder X - Travel      950 mm Y - Travel     440 mm Z - Travel      500 mm Electro magnetic table      800 x 400 mm Work piece weight    500 Kg Spindle speeds / ranges       3000 Rpm Coolant / Filtration /Yes DIMENSIONS Length      4870 mm Width       2690 mm Height       2400 mm

Membrane ultrafiltration XL 300 by B&P Engineering with a maximum efficiency of filtered apple juice of 30 -35 m3/h. Year of production 2007 / Expansion 2018. Very good condition. Technical parameters: 1. Membrane modules Type A19 FPA 20 12", quantity: 120 pcs. (installed on June 2022) 2. The filtration area is 300 m2 3. Capacity: 30 -35 m3/h of apple juice 12 Bx 4. Filtration/washing temperature 50 -55 degrees Celsius. c 5. Maximum working pressure 6 bar Ultrafiltration devices: 1. A block of 120 filter modules mounted on the frame of the device 2. Pump block: INOXPA DIN -FOOD, INOXPA SE26, PACO 3. CIP station: Grundfos dosing system + two capacity tanks. 100 l for  NaCLO, NaOH 4. Clear juice/CIP tank vol. 2.5 m3 5. Tubular heater 6. Control cabinet with a touch panel.

Other Info: Micro Blasting MAKE   IEPCO Peenmatic TYPE     Peenmatic 750 S YEAR    2000 DIMENSIONS Length    740 mm Width      520 mm Height      500 mm Make        : Iepco Swiss Type        : Peenmatic 770 S YOP         : 2006 No.         : 770 - 289   Working internal space   Length        : 740 Width         : 520 Height        : 500 Optimal product 500 x 400 x 250 mm   Dimensions outside   Length        : 870 Width       ...

Other Info: Micro Blasting MAKE   IEPCO Swiss TYPE     Peenmatic 770 S YEAR    2006 DIMENSIONS Length      740 mm Width        520 mm Make        : Iepco Swiss Type        : Peenmatic 770 S YOP         : 2006 No.         : 770 - 289   Working internal space   Length        : 740 Width         : 520 Height        : 500 Optimal product 500 x 400 x 250 mm   Dimensions outside   Length        : 870 Width         : 936 Heig ...

Drilling capacity: 500 mm Drilling depth: 0 mm Spindle taper: 40   Number of drilling spindles: 2   CNC Brand: Siemens CNC Model: Sinumerik Make Degen UTB 4 Type UTB 400 - 2 Year 2006 Siemens Sinumriek Tapping capacity (mm)Stroke = 500 mm Drilling capacity (mm)Double spindle Distance Column/center (throat) mm Taper SK 40 Tapping depth (mm)    iKZ Coolant Filtration system Twin spindle machine Optional Large tooling package  

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

Plate size 470 mm, During the process, a filter cake builds up from retained solids, which increasingly takes over the filter effect of the filter cloth. Thus, the initial surface filtration becomes a cake filtration with depth effect. With the "classic" chamber filter presses, the entire filtration cycle is driven via the feed pump. It starts with high throughput volume flow at low back pressure. As a result of the building up filter cake, the volume flow decreases with simultaneously increasing back pressure.

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Filtre presse manuel Netzsch 12 plateaux 250x250, contenance 12 litres, pression 15 bars, filtration ouverte, poids 250 Kg, dimensions 1500 x 550 x 1145 Pompe Tapflo TF50PTT, pression 7 bars, débit 3m3/h

Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 25 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic. Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Stock number: UG6346 Used stainless steel Padovan (IT) filter with horizontal rotating discs. Filtration surface 20 m2. Working output in range 25000-27500 l/h. Machine had been working on fruit juice filtration / food industry. Has local control panel and has technical documentation.

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

filtration performance: . l/min fleece width: . mm temperature: . °C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

Used Metalbud Nowicki MH140 injector is a high-performance device. It is equipped single head, easy and clear control using inituitive panel and efficient rotary drum filter for brine filtration. Using different parameters it is possible to adjust the belt speed and injecting pressure. Whole construction is made of acid resistant stainless steel which guarantees the ease of maintenance and maximum hygiene. Number of needles: 140 Max product height: 200mm Installed power: 11.7kw Belt width: 400mm Dimensions: L 1800 x W 1010mm x H 2015mm Weight: approx 550kg

Inv. Num. : 6136 Type: CTX alpha 5000 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Operating hours: 22803 h Switching-on hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Loader CNC Spacesaver SS 2500 (2018)

Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.

Brand: Velo Type: Diatomaceous earth filter Capacity: 8000 to 10.000 Litre/hour 38 Pfälzer screw fittings, • 4 m2 filter area with complete stainless steel filter and self-discharge via centrifugation • Suitable for pressure • with standing sieves, attached residual filtration and replacement pump (never used) • Manual tilting device for the discharge and vibrator for the remaining discharge • User friendly, filter can be cleaned very quickly Good, ready-to-use condition, flawless filter, and cost efficient Reason of sale; company asset sales

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

Capacity approx.: 200 hl/h, Filtration area approx.: 40 m², Temperature: 100 °C, Pressure approx.: 4 bar, Material: 1.4541, Features: 2 filter vessels (Schenk Filterbau GmbH, volume 2600 l), 1 Kieselguhr dosage unit , Periphery: Trapfilter (Filtrox, Typ Securox 50/24), Code: 469

Capacity approx.: 200 hl/h, Filtration area approx.: 40 m², Operating pressure: 4 bar, Volume: 26 hl, Material: Stainless steel 1.4541, Code: 469

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

Depalletizer APE mod. DEPAL 2000 - year 2003 Monoblock BERTOLASO 32.32.6.4 with pre-evacuation, composed of: SBR rinser 32 clamps double treatment and mobile nozzles - year 2002 BERTOLASO gravity filler 32 valves with corker 6 heads natural straight corks - year 2002 BERTOLASO Screw capper 4 heads stelvin - year 2006 Capsuling machine NORTAN mod. PRISMA 8+8 - year 2002 Labeller KOSME mixed glue adhesive mod. ETRA FIX 1280 15T.S2.E3 + S3.E3 electronic cam - year 2002 case erectors APE mod. FORM 200 HMA - year 2003 Case packer machines APE mod. INCA 2001 - year 2003 Carton closer APE mod. CH 200HM - year 2003 Palletizer APE mod. PAL 2000 - year 2003 Wrapping pallet TOSA mod. 095 - year 2002 BERTOLASO Caps elevator for natural straight corks mod. ALX1 - year 2002 BERTOLASO Caps Elevator for screw stelvin caps mod. A500 - year 2006 Printer for cartoon print and apply adhesive  ...

Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket

Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer: Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 - 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Key data: 626

Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...

Nuaire NU-440-600E fume hood The Nuaire 440-600 is ergonomically designed for user comfort and offers users more knee room. The Nuaire 440-600 has a unique sealed construction and a True Laminar AirFlow HEPA filtration system. The 440-600 biosafety cabinet features the advanced AirFlow Control Electronic System with precise programmable control for a safe, reliable environment. Specifications: Voltage: 230V, 50Hz Current: 11A Downflow 38 M/S Inflow: 46 M/S Inclusive: -2x 230 volt socket -Fluorescent lamps External dimensions (W) x (D) x (H): 200 x 85 x 150cm Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

CNC Floor Type Boring & Milling Machine   PAMA Speedram 1000   Manufactured new in 2008 - with only 4500 program run hours   Heidenhain iTNC 530 CNC Control   X 13000 mm   Y 3000 mm   Z 1000 mm   W 700 mm   Pama NC-Rotary travelling table   Table size 2000 x 2200 mm   Table load 16 t   B-Axis 360°/0.001° with contour milling capability   V-Axis table travel 2000 mm   Boring spindle diameter 150 mm   Spindle taper ISO 50   Spindle drive 37 KW   Spindle speeds to 3500 rpm   Floor plates   Huron type universal head   X,Y,Z hydrostatics   Optical scales X,Y,Z,V Axes   Linear magnetic scale W Axis   Coolant through the spindle 30 bar with filtration unit   Automatic attachment clamping on the ram   PREPARED for ATC   Excellent machine condition - Under power - Immediately available

WE OFFER AN WERY NICE CONDITION VARTICAL LATHE CNC Vertical Lathe (VTL) with C-Axis and Milling spindle & Pallet changer Pietro Carnaghi - ATF 8 TM Year 1995 NUM 1060 II CNC Control Pallet changer with 2 pallets Pallet diameter 800 mm Max. workpiece weight 1500 mm Swing diameter 1100 mm Turning diameter max. 1000 mm Turning height max. 750 mm Table drive motor 60 KW Table speeds 1.5 ~ 1000 rpm C-Axis 0.001° Milling spindle drive 23.5 KW Milling spindle speeds 12 ~ 3000 rpm Tool taper BT 50 Automatic tool changer for 80 tools Full work area guarding Chip conveyor Coolant through the spindle Paper band filtration unit Good condition High accuracies Under power for inspection Available immediately WE CAN ORGANIZE FOR CLIENTS AS WELL TRANSPORT OF MACHINE TO THEIR LO ...

Grinding diameter: 630 mm Grinding length: 4000 mm Workpiece weight: 900 kg CNC Brand: Siemens CNC Model: SIEMENS 840D 4 Axis controlled X, U, Z and C Axis Large steady rest package 6 units Concave grinding Covex grinding Dressing system Rebuild by Primoteq Centre height:           315mm Grinding Ø:              630mm Grinding length:         4000mm Grinding stone dimensions:710 x 80 x 305mm Table inclasement:       -5 to + 5° Tailstock:               6Mk Coolant system:          Yes Filtration:              Yes Length:                  12000mm Width:                  &nb ...

Universal external cylindrical grinding machine Studer S 12 + Automation loading system Seckler Manufacturer [manufacturer]: Studer CH Switzerland Type [ type]: Studer S 12 Control unit: Siemens 840D Sinumerik + Seckler Automation Ldesystem A16 + Streuli filtration system + Hönag Filtec exhaust air system Incl. handwheel/control panel Year of construction[construction year]: 10/2004 - 09/2017 Operating hours approx. 39.700h Dimensions Center width 150mm Grinding length max. 150mm Center height 175mm Grinding diameter 500mm workpiece weight 80kg Cross slide (X) travel 300mm Speed 0.001-30'000 mm/min. Lin. Mot. Resolution 0.00001 mm Longitudinal slide (Z) travel 350mm Speed 0.001-30'000 mm/min. Lin. Mot. Resolution 0.00001 mm Sanding headstock Grinding head pos. 0° or 30° Drive power 7.5/12.5 kW Grinding wheel right ø 500 x 80 x 203mm In ...

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Grinding length: 900 mm Grinding width: 360 mm Grinding height: 450 mm Wheel diameter: 300 mm Spindle power: 4 kW CNC Brand: Siemens Magnet table 800 x 400 mm Min. distance table to spindle center 125 mm Max. distance table to spindle center 575 mm Feed rate override all axis Vario speed grionding spindel drive Plunge cut grinding Parametic grinding and dressing Grinding intermittent & continious cross feed Coolant tank & filtration system Specifications Metric US Standard X - Travel900 mm Y - Travel450 mm Z - Travel360 mm Table Length1200 mm Table Width400 mm Table load700 Feed rate X-Axis30.000 mm/min. Feed rate Z-Axis400 mm/min. Grinding stone dimensions300 x 50 x 76,2 mm Feed rate Y-Axis4000 mm/min

Hole diameter maximum: 80 mm Grinding wheel diameter: 500 mm Workpiece height maximum: 260 mm CNC Brand: Siemens CNC Model: SIEMENS 840D Automatic dressing system Steady rest open C-type Package with stone & flanches Marposs measuring device Centre height260 mm Grinding Ø500 mm Grinding length2000 mm Grinding stone dimensions500 x 80 x 203 mm Grinding stone speeds1960 Rpm Table inclasement+ 6 to - 3 Gr ° Tailstock3 Mk Coolant systemYes FiltrationYes

for filtration of air

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...