bending double used for sale

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   MACH-id    1784 MAKE         Haeusler TYPE           VRM HY YOP             2000 SPECIFICATIONS Rolling width       4000 mm Rolling thickness 3  x toproll Ø      60 mm Rolling thickness 5   x toproll Ø     50 mm Rolling thickness prebending       40 mm Top Roll Ø       710 mm Bottom Roll Ø        640 mm Side roll Ø      520 mm Number of rolls          4 Rolling speed      1/4/6/8 m/min Top support         Yes Side supports       Yes Number of driven rolls  ...

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: HAEUSLER MACH-id       5424 MAKE           Haeusler Swiss TYPE             VRM - HY YOP               2001 SPECIFICATIONS Rolling width        3100 mm Rolling thickness 3  x toproll Ø     45 mm Rolling thickness 5x toproll  Ø       60 mm Rolling thickness prebending        40 mm Top Roll Ø       570 + 430 mm Bottom Roll Ø     540 mm Side roll Ø      420 mm Number of rolls      4 Rolling speed       2/4/6 m/min Control        HAEUSLER  ...

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 3   MACH-id    5393 MAKE         AKYAPAK TYPE          ASM-S YOP            1999 SPECIFICATIONS Rolling width        2000 mm Rolling thickness 3  x toproll Ø       6 mm Rolling thickness 5  x top roll Ø      8 mm Rolling thickness prebending       4 mm Top Roll Ø       170 mm Bottom Roll  Ø  170 mm Side roll  Ø        150 mm Number of rolls     3 Rolling speed 4,8 m/min Power        4 kW DIMENSIONS Length       4000 mm Width         1300 mm Height        1 ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

ISITAN BENDING MACHINE HORIZONTAL TYPE HP 22 - Capaciteite 22 ton - Hydraulic - Slag 200 mm - Digital uitlezing - Digital slag instelling - Table 1100 x 625 mm - Twee hands bediening of voetbediening - Centraal smeersysteem - Materiaalaanslag - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS ROUND BENDING MACHINE TYPE 4R OHS 1570 X 200 - 4 rolls - Capaciteite 1570 x 9 - Geharde rolling - Diameter boven rol 200 mm - Diameter onder rol 200 mm - Diameter zij roll 180 mm - Hydraulic - Digital uitlezing voor beweging left rol - Digital uitlezing voor beweging middelste onder rol - Digital uitlezing voor beweging right rol - Boven rol is hydraulic uitklapbaar - Stalen constructie ST-52 - Hydraulic Drop-End voor eenvoudige rolpositionering - Hydraulic op en neer bewegingssysteem met middelste- en zij roll - Hydraulic balanceringssysteem - Overbelastingsbeveiliging - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

SAHINLER RING BENDING MACHINE TYPE HPK 50 - Asdiameter 50 mm - Bovenste wals wordt hydraulicver - Drie roll aangedreven - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Opbergruimte voor roll - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id    5337 MAKE         Roundo Sweden TYPE           PAS 650 YOP             1991 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic          3 or 4 roll       4 roll Maximum sheet thickness       65 mm Bending length       3000 mm Max. Rolling capacity Ø 2.500       60 mm Max. Prebending capacity Ø 2.500        50 mm Top Roll Ø       650 mm Bottom Roll Ø     650 mm Side Rolls Ø      530 mm Working speed M/Min.    5 M/min. DIMENSIONS Length       7000 ...

OSTAS ROUND BENDING MACHINE TYPE SMR-S 1070 x 150 - Capaciteite 1070 x 8 mm - Electrically adjustable achterrol - Electrically adjustable onderrol (materiaal klemming) - Digital uitlezing voor beweging achterrol - Digital uitlezing voor beweging onderrol (materiaal klemming) - Geharde rolling - Conisch walsen - Pathdraaibare bovenrol - Centraal smeersysteem - Remmotor - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 10,00 mm Bending length: 2000 mm Number of rolls: 4   MACH-id     5331 MAKE          AKYAPAK TYPE             AHS / 4 YOP                2008 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical        Hydraulic 3 or 4 roll        4 roll Maximum sheet thickness         10 mm Bending length        2100 mm Max. Rolling capacity Ø 2.500         10 mm Max. Prebending capacity Ø 2.500     8 mm Top Roll Ø       210 mm Bottom Roll Ø      190 mm Side Rolls Ø         170 mm Working speed M/Min.4 M/min. DIMENSIONS  ...

Sheet thickness: 3,00 mm Bending length: 1050 mm Number of rolls: 2   MACH-id    5315 MAKE         Faccin Italia TYPE           HCU 1050 x 3 YOP             2008 SPECIFICATIONS Controll          Manuel Hydraulic / Mechanical         Hydraulic 3 or 4 roll       2 roll Maximum sheet thickness            3 mm Bending length        1050 mm Top Roll Ø        100 mm Bottom Roll Ø       300 mm Working speed M/Min.         7 M/min. DIMENSIONS Length        2600 mm Width          1250 mm Height         1900 mm  ...

Sheet thickness: 12,00 mm Bending length: 1500 mm Number of rolls: 4   MACH-id    5219 MAKE         Haeusler Swiss TYPE           VRM HY 1500 x 12 / 10 YOP              2002 SPECIFICATIONS Control         Conventionel Hydraulic / Mechanical      hydraulic 3 or 4 roll       4 roll Maximum sheet thickness        12 mm Bending length          1500 mm Max. Rolling capacity Ø 2.500       12 mm Max. Prebending capacity Ø 2.500        10 mm Top Roll Ø      220 mm Bottom Roll Ø     220 mm Side Rolls Ø       200 mm Working speed M/Min.4  M/min. DIMENSIONS Lengt ...

OSTAS ROUND BENDING MACHINE TYPE SMR 1070 x 96 - Capaciteite 1070 x 3 mm - Conisch walsen - Pathdraaibare bovenrol - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

Sheet thickness: 42,00 mm Bending length: 2500 mm Number of rolls: 4   MACH-ID   5190 MAKE        DAVI TYPE          MCB 2543 YOP             1997 SPECIFICATIES Werking Hydraulisch / Mechanisch      Hydraulic 3 of 4 rollenwals        4 roll Plaatdikte= 42 mm Wals lengte      2500 mm Max. wals dikte bij product Ø 2.500      42 mm Max. aanbuiging bij product Ø 2.500      32 mm Boven rol diameter Ø     430 mm Onder rol diameter Ø        400 mm Zij rollen diameter Ø         360 mm Werk snelheid in M/Min.       2-4 M/min. AFMETINGEN Lengte        5000 mm Breedte      &nbs ...

Sheet thickness: 3,00 mm Bending length: 1500 mm Number of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1 ...

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   MACH-id    5092 MAKE         Boldrini TYPE           PIR 600 x 100 YOP             1980 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic 3 or 4 roll        3 roll Bending length         600 mm Max. Rolling capacity Ø 2.500        100 mm Max. Prebending capacity Ø 2.500        70 mm Top Roll Ø       500 mm Side Rolls Ø     350 mm Working speed M/Min.    2.5 + 4 M/min .DIMENSIONS Length         3500 mm Width          1700 mm Height          2500 mm

Sheet thickness: 2,00 mm Bending length: 1020 mm Number of rolls: 3   MACH-id   5016 MAKE        Huvema Holland TYPE          HU 1020 x 2 YOP             2011 SPECIFICATIONS Hydraulic / Mechanical         Mechanical 3 or 4 roll      3 roll Bending length        1020 mm Max. Rolling capacity Ø 2.500        2  mm Top Roll Ø75 mmBottom Roll Ø  75 mm Side Rolls Ø    75 mm Power      0,75 kW DIMENSIONS Length       1600 mm Width         1000 mm Height         1200 mm  

Sheet thickness: 4,00 mm Bending length: 1250 mm Number of rolls: 2   MACH-id    5013 MAKE         Faccin Italia TYPE           HCU YOP            1990 SPECIFICATIONS Hydraulic / Mechanical     Hydraulic 3 or 4 roll         2 roll Bending length          1250 mm Max. Rolling capacity Ø 2.500        4 mm Top Roll Ø     165 mm Bottom Roll Ø     305 mm Power       6 kW Working speed M/Min.     5 M/min. DIMENSIONS Length        3500 mm Width          1300 mm Height         2200 mm

TUGRA RING BENDING MACHINE TYPE HPK 41 - Asdiameter 40 mm - Bovenste wals wordt hydraulicver - Digital uitlezing - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Sheet thickness: 4,5 mm Bending length: 1540 mm Number of rolls: 3   MACH-id    5011 MAKE         NOSSTEC LUNA Sweden TYPE           8266 15/45 YOP              1997 SPECIFICATIONS Hydraulic / Mechanical     Mechanical 3 or 4 roll        3 roll Bending length         1540 mm Max. Rolling capacity Ø 2.500     4.5 mm Max. Prebending capacity Ø 2.500      3.5 mm Top Roll Ø     120 mm Bottom Roll Ø      120 mm Side Rolls Ø        120 mm Power        1,1 kW DIMENSIONS Length       2100 mm Width         1000 mm Height        1200 mm  ...

AYEL-TECH RINGBIEGEMASCHINE TYPE TB 40 - Asdiameter 40 mm - Horizontaal/verticaal te gebruiken - Voetbediening - Noodstop - Met 1 set standaard stalen roll - Met 1 set kunststof roll voor buis 30 mm - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5001 MAKE         COMAC Italia TYPE           3055 YEAR          1990 SPECIFICATIONS Power       15 kW Horizontal / Vertical / or H + V        H + V Shaft Diameter ø     120 mm Roll diamter ø       400 mm Resistance moment Cm      333 Cm3 Capacity IPN      240 x 106 mm Capacity  HEB        120 x 114 mm Capacity Tube walltickness x Ø  139 x 5 mm Capacity Flatt         125 x 25 mm Hydraulic / Mechanical       Hydraulic Working speed M/Min.2.5 + 7.5  ...

1 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV G Built: 1989 Strip width max.: 2000 mm Wall thickness: max. 25 mm / Ø 530 mm 2 Qty. 1 Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1981 Strip width: max. 3500 mm Wall thickness: max. 12 mm 3 Qty. Second-hand 3 roll bending machine Mfc.: SW GmbH Type: SRMV Hy Built: 1983 Strip width: max. 3500 mm Wall thickness: max. 19 mm 4 Qty. 1 Second-hand 4 roll bending machine Mfc.: SW GmbH Type: SVRM Built: 1981 Strip width: max. 2000 mm Wall thickness: max. 16 mm

Outside diameter maximum: 105 mm Inside diameter maximum: 0 mm Pipe length maximum: 300 mm Angle degrees maximum: 0 Wall Thickness: 60 mm CNC Brand: _Unknown / Other MACH-id   4141 MAKE       PBT Swiss TYPE         25 YEAR       1999 - 635 uur SPECIFICATIONS Hydraulic / Mechanical         Hydraulic Horizontal / Vertical / or H + V        Horizontal Shaft Diameter ø    105 mm Shaft length            300 mm Working speed M/Min.        1 - 24 M/Min Capacity IPN          120 x 2000 mm Capacity HEB      140 x 3500 mm Capacity Tube walltickness x Ø    60 x 1000 mm Capacity Flatt        80 x 8 x 1000 mm Power  &n ...

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Smart Pro MACH-id    4117 MAKE       DAVI PROMAU Italia TYPE         MCA 2017 YEAR        2009 SPECIFICATIONS Controll         SMART PRO Hydraulic / Mechanical        Hydraulic 3 or 4 roll         4 roll Maximum sheet thickness        6 mm Bending length     2000 mm Max. Rolling capacity Ø 2.500    6 mm Max. Prebending capacity Ø 2.500     5 mm Top Roll Ø    170 mm Bottom Roll Ø   160 mm Side Rolls Ø       160 mm Power      5.5 Hp  kW    Working speed M/Min.     ...

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 2000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm CNC Brand: Elgo MACH-id   4106 MAKE       Stierli Bieger Swiss TYPE         300 CN C YEAR        2001 SPECIFICATIONS Controll     ELGO Hydraulic / Mechanical      Hydraulic Throat      300 mm Press force         30 Ton Stroke       2000 mm Table size Length x Width    1250 x 850 mm Working speed      600 Hour DIMENSIONS Length       2785 mm Width        1600 mm Height       1400 mm- ex. SIEMENS very littl ehours- incl. universal tool package- incl. hand opperator button- incl ...

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id   4022 MAKE        Haeusler Swiss TYPE          VRM - HY YEAR          SPECIFICATIONS      Hydraulic / Mechanical    Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness    30 mm Bending length     3000 mm        Max. Rolling capacity Ø 2.500      25 mm Max. Prebending capacity Ø 2.500      20 mm Top Roll   Ø    420 mm Bottom Roll Ø   400 mm Side Rolls Ø    340 mm

Sheet thickness: 3,00 mm Bending length: 1550 mm Number of rolls: 2   CNC Brand: Siemens CNC Model: Simatic Panel MACH-id    3994 MAKE        Lisse France TYPE          B 155 . 30 YEAR         1997 SPECIFICATIONS Controll     Siemens Simatic Panel Hydraulic / Mechanical    Hydraulic 3 or 4 roll      2 Maximum sheet thickness    3 mm Bending length      1550 mm Max. Rolling capacity Ø    2.500   3 mm Max. Prebending capacity Ø 2.500   3 mm Top Roll Ø   120 mm Bottom Roll Ø   300 mm

M. No.: 3463 / 18 (91.144.1301/021) Max. Format: B1

Sheet thickness: 13,0 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Smart Pro MACH-id   3608 MAKE   DAVI - Promau TYPE     MCB 3028 YEAR    2007 SPECIFICATIONS Controll   Smart - Pro Hydraulic / Mechanical    Hydraulic    3 or 4 roll  4 roll Maximum sheet thickness13 mm Bending length   3100 mm Max. Rolling capacity Ø 2.500  13 mm Max. Prebending capacity Ø 2.500  10 mm Top Roll Ø   280 mm Bottom Roll Ø  260 mm Side Rolls Ø  260 mm Power   15 Hp kW DIMENSIONS Length   5000 mm Width   1500 mm Height   1800 mm Davi mcb 3028  4 roll platebending machine  

TUGRA RING BENDING MACHINE TYPE PK 20 - Asdiameter 20 mm - Draait right-en leftom - Voetbediening - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: - Bending capacity - steel pipe of 20 - 60 x 4 mm - - stainless steel pipe of 20 - 50 x 3 mm - max. resistance moment 6.2 cm - max bending angle 180° - max radius 125 mm - Bending speed 8 sec - Drive 400 V / 3 kW - Space requirement approx. L 2400 x H 1600 x D 1000 mm - Weight approx. 1400 kg - with: - Bending angle control via potentiometer with digital display - 6-fold bending angle preselection - Indoor + external pipe deburrer - Bending tools Rx2.5D x 38 ; • 50 , 65 ;

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  18mm Top Roll Ø:                    430 + 300 mm Bottom Roll Ø:                 430mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:    & ...

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Sheet thickness: 14,0 mm Bending length: 2100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Bend iT 7 Axis Touchscreen Bend iT Cone bending device Hardned rolls (Hrc 58) Force lower roll to upper roll 70 Ton New over EUR 100.000 Rolling width:                 2.100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    260mm Bottom Roll Ø:                 250mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 0 - 8 m/min Number of dri ...

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

M. No.: 121

Sheet thickness: 50,00 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: DAVI EASY Rolling width:                 3100mm Rolling thickness 3x toproll Ø:40mm Rolling thickness 5x toproll Ø:50mm Rolling thickness prebending:  40mm Top Roll Ø:                    530mm Bottom Roll Ø:                 470mm Side roll Ø:                   400mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        0 - 200mm/min. Adjustment side rolls:         0 - 200mm/min. Top support:  ...

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 3   Top support Variable geometry with three movebale rolls Linear slidews for roll movement Lubricatipon system Separate pendant control with optical position side rolls Rolling width:                 3050mm Rolling thickness 3x toproll Ø:30mm Rolling thickness 5x toproll Ø:40mm Rolling thickness prebending:  20mm Top Roll Ø:                    420mm Side roll Ø:                   380mm Number of rolls:               380 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:        ...

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   Hydraulic drop end Digital read out position side rolls Pendent control position side rolls Rolling width:                 3000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  16mm Top Roll Ø:                    420mm Side roll Ø:                   405mm Number of rolls:               3 Rolling speed:                 6,5 Length:                        5800mm Width:                        &nbs ...

Robust, high-quality round sheet bending machine for already profiled workpieces (sheet blades) - with motor drive at the bottom and top adjustable workpiece width between 300 mm and 800 mm, largest sheet thicknesses which can be bent round copper / titanium zinc / aluminium 0.8 mm - galvanized steel sheet 0.7 mm - stainless steel sheet 0.5 mm, smallest possible bending radius 350 mm - bending radius depending on the yield strength - smallest bending radius galvanized steel plate 0.7 mm - 1,000 mm, continuous speed infinitely adjustable 1 to 6 m/min, drive capacity 2 x 0.75 kW, weight 375 kg

OSTAS ROUND BENDING MACHINE TYPE ORM 1070 x 110 - Capacity 1070 x 4 mm DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

REI 11 Cutting and straightening system Progress Concrete steel processing Y.O.M. 2007 Price from location S-Anhalt

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Used machine in good condition. Available for immediate delivery.