Ленточно-шлифовальное приспособление (31)

Key data: 1100 mm

DMC Polisand 110 RP широколенточный шлифовальный станок 1998 год Лак Широкий ленточный шлифовальный станок общая установленная мощность ок, 23 кВт Ширина шлифования 1100 мм Толщина заготовки примерно до 170 мм Моторизованное позиционирование по высоте с цифровым считывателем Вакуумная транспортная лента, вакуумная установка F,LLI FERRARI с мощностью двигателя 4 кВт Мощность питающего двигателя 1,50 кВт Агрегат 1: рифленый резиновый шлифовальный валик, с воздуходувками Агрегат 2: шлифовальный круг, ...

Auction-ID: A1-40901-255

Маленькая шлифовальная машина, работающая на 380V три. Поставляется с 26 абразивными лентами для металла (абразив: боразон), для атласной отделки нержавеющей стали и для дерева. Раздвижной стол, регулируемый вручную по высоте (размеры: 170 x 65 см). Размеры пояса: 4200 x 150 мм. Машина поставляется с: 10 новых полос 3M с зернистостью 150 для дерева или алюминия (стоимость примерно 350-€ без учёта НДС) Для атласной отделки нержавеющей стали: 1 новая полоска, зелёный цвет 2 полосы почти новые, бордовый  ...

Machine in working order. Sanding belt 30cm width. Auction-ID: A3-46115-4251

Key data: 150 mm, 7800 mm

Длинноленточный шлифовальный станок Johansen

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40901-527

Настольная ленточная шлифовальная машина Höfer Motor 4,2 кВт формат 2,50 x 1,20 метра

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40901-226

СПЕЦИФИКАЦИИ: Установленная мощность: 5,5 кВт 2 маховика Ø 450 мм Длина шлифовальной ленты: 4900 мм 2 настройки скорости

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40901-529

Код: 0021 Бренд: БОР - АВСТРИЯ Модель: 150/330 Шлифовальная площадка для ленточного шлифовального станка Универсальная шлифовальная площадка для ленточных шлифовальных машин из графита для массива дерева и шпона - мм 330 x 150 Габаритные размеры мм 330 x 150 x 100 h Вес кг 4

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40901-528

Продается подержанная шлифовальная машина steinemann. Бумага вверх и вниз, супер широкая, 200 кВт. 1990 г. Короткое использование.

4Kw motor. Belt sander is defective. Auction-ID: A1-51321-14

СПЕЦИФИКАЦИИ: Горизонтальный ленточный шлифовальный станок Ширина стола, мм: 800 Длина стола, мм: 2 900 Ширина шлифовочной ленты, мм: 1 500 Длина шлифовочной ленты, мм: 8 000 Максимальная рабочая высота мм: 600 Мощность главного двигателя л.с.: 4 С шлифовкой

Number of sanding units: 6 st.sanding width: 45-165 mmSanding height max.: 45-92 mmweight: 2200 kgEcoline Q-SAND 6For sale on behalf of a customer--------------------------------------------Full text as PDF attachment!Short description:Machine with infeed conveyor and automatic height detection.It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit.Technical manufacturers description:Ecoline Q-Sand: the ideal grinder for squared timber and more.Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be us ...

Ремень шлифовальный станок для дерева и металла, роликовые интервалы около 3000 мм

Auction-ID: A3-46110-5786

material width: . mmmaterial thickness: . mmmaterial cross-cut: . mm²The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...

Number of sanding units: 2 st.sanding width: 300 mmSanding height max.: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ширина полос: 75 ммдлина ленты: 2000 ммскорость ленты: 37 м/минобщая потребляемая мощность: 3 кВтвес машины ок.: 0,084 тгабариты машины ок.: 1x0,5x1 �

ширина полос: 75 ммдлина ленты: 2000 ммскорость ленты: 37 м/минобщая потребляемая мощность: 3 кВтвес машины ок.: 0,11 тгабариты машины ок.: 1x0,5x1 �

Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin N-------------------------Machines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush