bauscher kg used for sale

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 702 built in 1988Max. Grinding range: 0.3 - 4 mmMax. Drill length: 90 mm4 point angles: 90/118/130/140 °Bevel angle: 0 - 27 °Connected load: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx: 35 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make TOS type SV 18 RAMachine -No: 018100830833, year of construction approx. 1980Technical specifications:Distance between centers: 1000 mmCenter height: 180 mmCircumferential diameter over bed: 380 mmCircumference diameter over support: 215 mmSpindle bore: 41 mmSpeed range: 14 - 2800 rpm.Longitudinal feeds: 0.02 - 5.6 mm / revFlat feeds: 0.01 - 2.8 mm / revmetric pitches: 0.2 - 140Inch thread: 1/5 - 140/1 DP thread: 1 - 224 DFModule thread: 0.2 - 70 M.Drive power: 6.0 kWDimensions approx: 2200 x 1000 x 1400 mmWeight approx: 1800 kgWith- Steel holder- three-jaw lathe chuck- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Twist drill grinding machine make SCHANBACHER type S 3-50Machine -No: 80 1018Technical specifications:Grinding range: 3 - 50 mmPoint angle: 90 - 140 °adjustable clearance angle and relief grindingGrinding wheel dimensions: 175 x 32 x 20 mmGrinding wheel drive: 380 V, 0.25 kWGear motor for swivel movement in the machine framebuilt-in: 0.12 kWDimensions approx .: 600 x 850 x 1200 mmWeight approx: 120 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 327 built in 1978Technical specifications:Max. grinding range: 0.3 - 4 mmMax Drill Length: 90mm4 point angles: 90/118/130/140°Relief angle: 0 - 27°Connection value: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx.: 35 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make GRAZIANO type SAG 210Technical specifications:Distance between centers: 1000 mmCenter height: 210 mmCircumferential diameter over cross slide: 268 mmCircumferential diameter in the crank: 580 mmSpindle bore: 57 mmBed width: 330 mmLength of the offset with the driving flange: 316 mm24 spindle speeds: 38 - 2000 rpm.80 longitudinal feeds: 0.020 - 0.44 mm80 cross feeds: 0.010 - 0.22 mm40 WW thread: 46 - 340 metric pitches: 92 - 640 module thread: 0.25 - 2.875 mod.Leadscrew pitch: 3/8 Rapid traverse: 6000 mm / minDrive power: 7.5 kWDimensions: 2700 x 1400 x 1370 mmWeight approx: 2270 kgWith- three-jaw lathe chuck- Multifix steel holder with several inserts- fixed bezel- moving center point- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Twist drill grinding machine make HAASE type WS 20Machine -No: 40175Technical specifications:Grinding range: 2 - 20 mmDrilling angle adjustment: 60 - 180°Stepless milling angle adjustment: 0 - 25°Power connection: 220 V / 50 HzApprox. weight: 12 kgExternal dimensions approx.: 400 x 300 x 250 mmwith- 2 clampsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Slotting machine RUWO-HAHNDORF type SEW 52/300Machine -No: 66/7880 built in 1966Butt length: 300 mmGroove width max .: 32 mmSmallest bore: 40/17/6 mmCutting speed: 5 m / min.Faceplate diameter: 360 mmDrive power: 1.1 hpWeight: 220 kgOutside dimensions: 780 x 400 x 120 mmWith- Underframeused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make MEXPOL / PONAR type TUR 50 SMachine -No: 45499 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 250 mmCircumferential diameter over bed: 500 mmCircumferential diameter over support: 300 mmSpindle bore: 80 mmShort cone: size 836 spindle speeds: 18 - 1800 rpm.42 feeds lengthways: 0.64 - 26 mmacross: 0.32 - 13 mmMetric thread pitches: 42Inch thread: 42Diametrical pitch thread: 42Machine weight: 2720 kgRequired space approx .: 2500 x 1300 x 1630 mmWith- Acu-Rite digital display- three-jaw lathe chuck- faceplate- 4-way steel holder- 1 steady rest (fixed)- 1 moving center punchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Hor. Grooving machine make RUWO HAHNDORF type REWK 52/10Machine -No: 81620 Year 1981Butt length: 300 mmGroove width when pushing: 32 mmGroove width when clearing: 10 mmkl. Bore diameter when pushing: 40/17 mmkl. Bore diameter with spec. Grooving knives: 6.0 mmkl. Bore diameter when broaching: 6.0 mmCutting speed: 3.0 m / min.Traction: 2.0 tDrawing length in 2 moves: 500 mmRäädadellänge max.: 640 mmFaceplate diameter: 360 mmDrive power: 1.5 hpWeight approx: 230 kgLength of the machine: 780 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical shaping machine manufactured by RAVENSBURG type S 200Technical specifications:Large stroke of the ram: 200 mmRam adjustment: 200 mmRound table diameter: 440 mmThroat: 410 mmGroove width max: 32 mmHeight between table and ram guide: 370/470 mmLongitudinal table displacement: 375 mmCross table displacement: 350 mm4 lifting speeds: 33/49/75/110 H / min6 feeds, lengthways per slide stroke: 0.03 - 0.3 mmacross per ram stroke: 0.07 - 0.7 mmround per ram stroke at 100 mm diameter: 0.05 - 0.5 mmDrive power: 3.0 kWDimensions approx: 1000 x 1600 x 2200 mmWeight: 2000 kgWith- Round dividing tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Vertical slot broaching machine make ROSCHER & EICHLER type ST 3Year of construction 1962Technical specifications:Projection: 350 mmTable size: 650 x 250 mmNumber of ram strokes per minute: 45 - 73 - 125largest stroke of the ram: 180 mmLongitudinal movement of the table by hand: 420 mmLongitudinal movement of the table automatically: 400 mmCross movement of the table by hand: 150 mmAutomatic transverse movement of the table: 145 mmVertical movement of the table by hand: 300 mmgreatest height between table and ram guide: 400 mmExternal dimensions L x W x H approx.: 1230 x 1250 x 1700 mmWeight approx: 850 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Vertical machining center make BRIDGEPORT type Interact 412Machine -No: 73440A built in 1988Table size: 840 x 320 mmTravel X: 450 mmTravel Y: 310 mmTravel distance Z: 300 mmMax. Table load: 250 kgSpindle speed: 40 - 4000 rpm.Spindle mount: ISA 40Feed range: 0 - 4.5 / 7.5 m / min.Rapid traverse: 12 m / min.Number of tools in the changer: 12Max. Tool diameter: 75 mmMax. Tool length: 250 mmMax. Tool weight: 6.0 kgTool change time: 8,0 sec.Drive power: 5.5 / 3.7 kWWeight approx: 2,3 tOutside dimensions approx: 1910 x 1850 x 2000 mmWith- Heidenhain TNC 355 CNC control- Vice- several tool holdersused, in working order, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM.  ...

Vertical slot broaching machine make ROSCHER & EICHLER type ST 3Machine -No: 9273 built in 1961Technical specifications:Projection: 350 mmTable size: 650 x 250 mmNumber of ram strokes per minute: 45 - 73 - 125largest stroke of the ram: 180 mmLongitudinal movement of the table by hand: 420 mmLongitudinal movement of the table automatically: 400 mmCross movement of the table by hand: 150 mmAutomatic transverse movement of the table: 145 mmVertical movement of the table by hand: 300 mmgreatest height between table and ram guide: 400 mmExternal dimensions L x W x H approx.: 1230 x 1250 x 1700 mmWeight approx: 850 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

Hardness tester make VEB Leipzig type HPO 3000Fabr. -No: 309/36 built in 1982Load levels: 3000 kp / 29420 NError limit of load levels: +/- 1%Outreach: 200 mmlargest clamping height: 365 mmTest bench with clamping grooves: 260 x 400 mmOptical measuring device with eyepiece measuring microscope, magn. : 25 timesand micrometer, scale value: 0.01 mmViewing Neckline: diam. 7 mmDial gauge for monitoring the test procedure: Drm. 100 mmMeasuring range: 0 - 5 mm1 pointer revolution: 1 mmScale value: 0.01 mmOperation: electro-hydraulicelec. Connection: 220 V, 60 HzConnected load: 1.2 kVAExternal dimensions L x W x H: 920 x 420 x 1400 mmWeight: 530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

Vertical slotting machine make BEHR type ST 150Machine -No: 096, built in 1955Technical specifications:large stroke: 150/175 mmSlide adjustment: 150 mmInclination of the ram in both directions: 5/8 degreeProjection: 450 mmHeight of table / UK ram guide: 260 mmRound table diameter: 340 mmLongitudinal displacement of the table: 320 mm3 lifting speeds: 17/54/108 H / min.large groove width: 16/26 mmWeight approx: 1000 kgExternal dimensions approx .: 960 x 1530 x 2030 mmWith- Feeds in X and Y (forwards and backwards) Adjustable speed- Adjustment of the rotary table manually- without the chuckused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...

Measuring machine make MORA type 0190Fabr. -No: 16079/0888 year 02/88 for measuring rotational parts(as used to measure propellers)in 2 levels, in conjunction with a pivot point with encoderMeasuring height: 1500 mmMeasuring width: 1200 mmDistance of the pivot point from the measuring stand: 1400 mmInstallation height from the chuck to the highest position of the chuckProbe: 1260 mmChuck with inner jaws: 240 mm Drm.Space requirement with internal jaws: 2550 x 750 x 2550 mmWeight estimated approx .: 700 kgWith- Digital display with keyboard for X and Z attached to the machine- Turn-Check-Program MS-DOS Version 1.3 for measuringxa0propellers- EPSON FX 1000 printer- Calculator PEALOCK- Monitor- Measuring head RENISHAW with various buttons- technical documentsused, from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Pay ...

Vertical slotting machine make WMW Meuselwitz type StS 400Serial no. 4178.20.61, built in 1961Technical specifications:Stroke: 400 mmRound table diameter: 850 mm6 ram strokes: 18 - 56 / minCutting speed: 2 - 70 m / minFeed per cut: 0.14 - 1.4 mmConnected load: 9 kWExternal dimensions L x W x H: 2800 x 2000 x 3300 mmWeight: 6200 kgwith- swivel headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grooving machine make RAUSCH type RS 1/800Year of construction 1964Clearing power: 1.0 tStroke: 800 mmMax. Groove width: 20 mmMax. Tool length: 1000 mmClearing speed: 3.0 m / min.Return speed: 6.0 m / minTable size: 320 x 220 mmDrive power: 1.5 / 3.0 kWWeight: 340 kgExternal dimensions approx: 700 x 600 x 1500 mmWith- several guide sleevesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical broaching machine make RAUSCH type RS 3/1000Fabr. -No: 3289536, year of construction 1980Traction: 3 tStroke: 1000 mmMax. Groove width: 20 mmMax. Tool length: 1200 mmClearing speed: 3 m / minReturn speed: 6 m / minDrive power: 1.7 kWDimensions L x W x H: 540 x 720 x 1460 mmWeight approx: 250 kgWith- several guide sleeves- 1 set of broaches 4/6/8/10/12/14 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal grooving and broaching machine manufactured by HENNING type KM 350Masch. -No: 19001 Year of construction 1976Technical specifications:Clearance length: 350 mmDimensions approx .: 2100 x 1000 x 1300 mm weight approx .: 1200 kgWith- Accessories on guide sleeves, broaches- Operation switch pushing / clearing- Reverse and set-up operation- Reversal soft - hard- coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

5-way combined profile steel shears make PEDDINGHAUS type 210 Super 13Machine -No: 580AC015 built in 1979Technical specifications:Flat steel: 200 x 13 mmL-steel: 120 x 13 mmU-steel: 180 mmRound steel: 45 mmSquare steel: 40 mmPunching force: 65 tholes: 27 in 19 mmor: 90 in 5.5 mmStroke: 25.5 mmProjection: 370 mmWeight approx: 2100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal bed milling machine make NIIGATA type 2 UMCMachine -No: 62950 Year 1986Table size: 1370 x 310 mmTable longitudinal path = X: 870 mmTransverse travel = Y: 370 mmVertical travel = Z: 400 mmDistance table to spindle: 50 - 450 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 longitudinal and transverse feeds: 20 - 800 mm / min9 vertical feeds: 9 - 355 mm / minRapid traverse longitudinal and transverse: 3000 mm / minRapid traverse vertical: 1375 mm / minDrive power: 5.5 kWFeed motor: 1.5 kWDimensions L x W x H: 1825 x 2005 x 1745 mmWeight approx: 3000 kgWith- 3-axis digital display Anilam- Milling head can be swiveled from vertical to horizontalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Motorized punch PEDDINGHAUS type Forax 25 EMasch -No: 4220252183013 Year 1983Punching force: 25 tDischarge: 185 mmPunches: 27 in 7with special device: 39 in 5or: 58 in 3.5or: 90 in 2.2Stroke length: 18 mmStrokes per minute: 58Installation height: 189 mmWeight approx: 340 kgWith- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Univ. Bed milling machine make NIIGATA type 3 UMAYear 1978Table surface: 1600 x 380 mmTable longitudinal path X: 1000 mmTransverse Y: 420 mmVertical path Z: 400 mmSpindle mount: ISA 5016 spindle speeds: 45 - 1400 rpm9 feeds longitudinal and transversal: 20 - 800 mm9 vertical feeds: 5 - 200 mmRapid traverse longitudinal and transverse: 3000 mm / minxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 vertical: 750 mm / minMax. Table load: 700 kgMax. Distance between stand / spindle: 470 mmMax. Distance table / spindle head: 70 - 470 mmDrive power: 11 kWWeight: 3.9 tExternal dimensions: 2245 x 2280 x 1830 mmused, despite the year of construction ingood conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

Universal punch make EDEL type VM 40/350Machine -No: 24735456 Year of construction 1976Punching force: 40 tProjection: 350 mmStrokes per minute: 60Punches: 24 in 12or: 50 in 6Klinkleistung: 100 x 100 in 5 mmDrive power: 2.2 kWWeight approx: 1100 kgOutside dimensions approx: 780 x 1300 x 1750 mmWith- Rectangle - Notecards (currently furnished)- Tool carrier for punching out punch 68 mm- many punching tools- Footswitchused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lever hole punch type MUBEA type 22 N 16punches max: 16 in 10 mmTable size: 200 x 240 mmProjection: 160 mmLever length: 800 mmExternal dimensions Machine with lever: 500 x 250 x 1400 mmWeight approx: 76.5 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...

Punching machine make EDEL type HM 25/250Machine -No: 222191169, built in 1969Technical specifications:Cutting pressure max .: 25 tProjection / entry depth: 250 mmpunches holes up to dia. : 20, 26, 30, 40 mmin leg irons up to thickness: 10 / 7.5 / 6.5 / 4 mmpunches mitres andNotches in L-irons up to: 40 x 40 x 5 mmStamp size (shaft diameter x length): 30 x 120 mmDrive power: 2 HPWeight: approx. 900 kgExternal dimensions: 1400 x 900 x 1800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic hole punch make EDEL type HP 10/100 BTechnical specifications:Punching force: 10 tProjection: 100 mmpunches round and square up to: 45 mmpunches thickness up to: 6.0 mmfor example: 20/4mm:45 / 1.7mmWorking height: 980 mmRam Stroke: 10mmApprox. weight: 115 kgDimensions with base approx.: 800 x 250 mmwith- maintenance unit- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal bed milling machine make ERNAULT SOMUA type Z 1 CFabr. -No: 104470/333, built in 2/1970Table mounting surface: 1200 x 300 mmTable movement lengthwise: 700 mmY: 250 mmZ: 400 mmSpindle taperSpindle speeds Horizontal: 50 - 2500 rpmSpindle speeds Vertictal: 40 - 2000 rpmautomatic feeds f. along u. across the limit switchMotor power spindle approx.: 3 kWexternal dimensionsWeight approx: 1760 kgWith- Additional track control / cam control via connector panel- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lever hole punch make MUBEA type 22 N 16rebuiltTechnical specifications:punches max: 16 in 10 mmTable size: 200 x 240 mmDischarge: 160 mmLever length: 800 mmExternal dimensions Machine with lever: 500 x 250 x 1400 mmWeight approx: 30.5 kgWith- Undercarriage mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC bed milling machine make HURON type FXMachine -No: 890187 built in 1989Technical specifications:Working area X: 900 mmWorking area Y: 520 mmWorking area Z: 600 mmSpindle mount: ISA 40stepless speed range: 30 - 3150 mmTable size: 1000 x 700 mmmax.table load: 1300 kgTable height: 700 mmFeed rates X Y Z: 0 - 4000 mm / min.Feed force X Y Z: 5500 Nmax.feed force: 7700 NMotor power: 11 kWDimensions approx: 3000 x 2000 x 2500 mmWeight approx: 8000 kgWith- CNC control Heidenhain TNC 355- hydraulic tool clamping- hydraulic gear switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever section steel scissors make MUBEA type 5 SN / 10 Rfor sheet metal, flat and bar steelKnife length: 175 mmcuts sheets up to: 10 mmFlat material: 80 x 13 mmRound material: 22 mmSquare material: 22 x 22 mmOutside dimensions with base (without lever): 1400 x 350 x 900 mmWeight without base: 106 kgWith- Undercarriage mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC tool milling machine make DECKEL type FP 4 AMasch. Nr: 2284 0273 Year 1983 with GRUNDIG pattern control with screenworking areaX-way longitudinal: 485 mmY-way cross: 385 mmZ-way vertical: 380 mmPinolenweg: 80 mmVertical milling head displaceable on the headstock: 150 mm18 spindle speeds: 50 - 2500 rpm.Feed infinitely variable: 2 - 1000 mm / minRapid traverse X, Y and Z: 2000 mm / minSpindle mount: ISA 40Table surface v. Angle table: 800 x 460 mmpermitted table load: 400 kgDrive power: 3.7 / 4.4 kWOutside dimensions approx .: 1200 x 1750 x 2000 mmWeight approx .: 2000 kgWith- fixed angle table- aut. Tool clamping- Screen route control- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offeran ...

Single-spindle automatic turret make TRAUB type TK 30Machine -No: 159 built in 1979Clamping diameter DIN 6343 up to: 30 mm11 spindle speeds: 400 - 4000 rpm.Crosswise support front / rear: 43/43 mmDrive power: 4.5 / 6.3 kWWeight approx: 1800 kgOutside dimensions approx: 1800 x 900 x 1600 mmWith- Cross support- Copying device- star turretused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret lathe manufactured by EMAG type NE 42Technical specifications:Tip height: 180 mmMax. Turning length: 400 mmlargest swing diameter over bed: 360 mmSpindle speeds: 55 - 2000 rpmSpindle bore: 42 mmExternal dimensions approx: 1800 x 800 x 1600 mmDrive power: 3.0 / 4.0 HPWeight: approx. 875 kgWith- Turret support with 6 tool stations- Collet device with 14 collets up to 32 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning machine make TOS type Galanta Zyklotronic HAD 40/75Machine -No: 400507596001 Year 1996Turning length: 750 mmTop height: 230 mmCircumference diameter over bed: 400 mmCircumferential diameter over cross slide: 230 mmCircumference diameter in the offset: 460 mmSpindle mount: DIN 52027 / B 6 CamlockSpindle bore: 50.8 mmSpeed range: 20 - 3500 rpm.Feed: 0.001 - 9999 mm / min.Rapid traverse: 6.0 / 3.0 m / min.Drive power / connected load: 7.5 kW / 13 kVAWeight approx: 1760 kgOutside dimensions approx: 2100 x 1200 x 1725 mmWith- CNC control FAGOR 800 T CNC- 3-jaw chuck- revolving center point- Multifix steel holder with multiple insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

CNC console milling machine make MEXPOL JAFO type FXH 400 NBMachine -No: 0505 built in 1984Table clamping surface: 400 x 1250 mmTravel X-axis: 900 mmTravel Y-axis: 250 mmTraverse Z-axis: 450 mmTool holder: ISO 5016 spindle speeds: 56-1800 rpm.continuously variable feed rates X and Y axis: 2-2000 mm / minstepless adjustable feed Z-axis: 1-1000 mm / minRapid traverse X- and Y-axis: 3200 mm / minRapid traverse Z-axis: 1600 mm / minDrive power: 11 kWDimensions: 2800 x 2990 x 2150 mmWeight approx. 3600 kgWith- Railway control HEIDENHAIN TNC 151- Horizontal holderused, from one operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic Lathe Fabr. WEILER Type MDU WMachine -No: 12401 Year 1971Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over slide: 140 mmMax. Tip width: 500 mmSpindle bore: 28 mmSpindle speeds: 160-1800 rpm.Drive power: 1.1-1.2 kWWeight: 400 kgOutside dimensions: 1300 x 600 x 1200 mmWith- Cranksupport- Collet device with draw tube and colletsused, from operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret Lathe Fabr. SPRINT Type T.R. 26Fabr. -No: 556Technical specifications:Center height: 125 mmdistance between centersSpindle bore: 30 mmBed length: 700 mmBed width: 140 mmMax. Distance Turret tailstock / spindle: 400 mmSpindle speeds: 140 - 2830 rpmExternal dimensions Length x width x height: 1500 x 800 x 1600 mmWeight approx: 700 kgWith- Spangenangeneinrichtung- Revolver stick- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Production lathe Fabr. WEILER type MF 220Top height: 100 mmTurning diameter over bed: 220 mmTurning diameter over cross slide: 120 mmTip width: 450 mmSpindle bore: 23 mm12 spindle speeds: 125 - 2800 rpmExternal dimensions length x width x height: 1080 x 450 x 1180 mmWeight approx: 225 kgWith- ColletsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC universal tool milling machine make AUERBACH type FUW 725Fabr. -No: 021 Year 1992Table size fixed angle table: 1000 x 500 mmTable load: 500 kgTravel X-axis lengthwise: 725 mmTravel Y-axis transverse: 525 mmTraverse Z-axis vertical: 505 mmTool holder: ISO 40Quill stroke: 80 mmSpindle speeds: 25 - 5000 rpm.Operating voltage: 3890VDrive power: 10 kWDimensions W x D x H: 2600 x 3800 x 2350 mmWeight approx. 4100 kgWith- Complete housing- CNC control PHILIPS CNC 3460- 20-fold tool changer KELCHused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe made by FEINBAU type PM 1 FMasch. -No: 1437 Year of construction 1960Technical specifications:Spindle passage: 23 mmTip height: 110 mmDistance between centers: 160 mmlargest swing diameter over bed: 220 mmlargest swing diameter over cross support: 110 mm3 spindle speeds: 700/1400/2800 rpm.Drive power: 0.22 / 0.3 / 0.5 kWWeight approx: 75 kgWith- Lever support- Lever tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Poppet turning lathe make HUNGER type VDKYear of construction 1982Center height: 60 mmSupport adjustable: 29-30 and 44-45 °Bed width: 85 mmCone diameter: 20 - 60 mmShank diameter: 6 - 15 mmPower connection: 380 V / 50 HzWeight approx.: 15 kgOutside dimensions approx: 340 x 120 x 220 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table Universal Nachdrehmaschine Make SEE type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- 4-fold steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal small lathe manufactured by UNGARN, type EMU - 250Fabr. -No: 3104, year of construction 1973Technical specifications:Center distance: 600 mmTop height: 130 mmTurning diameter over bed: 260 mmSpindle bore: 28 mmStepless speeds: 52 - 2250 rpm.Drive power: 1.62 kWExternal dimensions: 1785 x 600 x 1200 mmWeight: 770 kgWith- Three-jaw chuck 140 mm- Quadruple steel holder- tailstock- Drill chuckusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal CNC machining center make MATSUURA type MC 600 H - 45Masch. -No: 870706216 Year of construction 1987Table work area: 450 x 450 mmTable longitudinal path X: 600 mmvertical travel of the headstock Y: 450 mmStander traversing Z: 480 mmTable index increment: 0.001 mmMax. Table load: 500 kgNumber of tools in the changer: 50Distance table spindle axis: 85 - 525 mmCenter of table spindle: 125 - 605 mmSpindle diameter: 80 mmSpindle mount: BT 40Spindle speed: 30 - 6000 rpm.Rapid traverse XYZ: 15000/15000/15000 mm / min.Feed rate stepless: 1 - 5000 mm / min.Drive power: AC 7.5 / 11 kWWeight: 8200 kgWith- CNC control Fanuc 11 M- Number of change tables 2- a lot of tool holders- 14461 operating hours- Chip conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Err ...