battenfeld ba 150 used for sale

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton

warehouse no.: 501525 manufacturer: BATTENFELD Typ: Druckplatte 4505715 year of construction: 2012 We offer a mould plate / pressure plate for injection moulding machine from BATTENFELD for model HM II 4500, number 4505715. Pressure plate for injection molding machine Battenfeld HM series II 4500, Art. Nr.: 4505715th printing plates include injection molding machines to the highly stressed machine parts. The pressure plate is offered immediately from stock in Langenfeld (Rheinland), available

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit.

BATTENFELD 400/150 S-KS /… / 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 760 x 755 Clearance between columns (hxv) [mm] 520 x 470 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 358 Injection weight [g] 325 Injection pressure [bar] 2116 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 13.9 Dimensions and weight Net weight with control cabinet [t] 6.6 Dimensions (length x width x height) [m] 4.6 x 1.6 x 2.2

Battenfeld Fischer Type: BFB 1-6 D, 1000 h runhour! Control: - Built: 1996 Other 2 litres, double head double station

Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE

Battenfeld injection moulding machine Type: TM 1600 / 750 control: B4 year: 2001 Clamping unit Clamping force t 160 Gap mm: 480 Holm dimension mm: 520 x 520 min/max height mm: 225...-550 Plate size: 750 x 815 injection unit Screw diameter mm: Gr 40 injection weight: 258 Injection volume cm m³: 283 Spray pressure bar: 2678 Dimensions and weights Dimensions Lxwxh m: 5.1 x 1.5 x 2.1 machine weight kg: 6000 Miscellaneous B-4 control system interface

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12146 h Runhour! Control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 8000 / 7700 HM, 12757 h Runhour! Control: Unilog 9000 C year of manufacture: 1996 Clamping unit Clamping force t 800 gap mm: 1250 Holm dimension mm: 1750 x 1530 min/max height mm: 500 / 950 Plate size: 1750 x 1530 injection unit Screw diameter mm: 100 injection weight gr: 3574 Injection volume cm m³: 3927 spray pressure bar: 1960 Dimensions and weights Machine weight kg: 42,000/14,500 other Weight injection unit 14,500 kg dimensions (L x B x H) 6.00 x 1.72 x 2,20 m weight clamp unit 42,000 kg dimensions (L x B x H) 5.65 x 2, 80 x 3.36 m with Battenfeld robot

Battenfeld injection moulding machine Type: BA 6500 / 2800 HM control: Unilog 9000 C year of manufacture: 1997 Clamping unit Clamping force t: 650 gap mm: 800-1400 Holm dimension mm: 1000 x 1000 min/max height mm: 500 / 1100 Plate size: 1400 x 1550 injection unit Screw diameter mm: 85 injection weight gr: 1936 Injection volume cm 3: 2128 spray pressure bar: 1354 Dimensions and weights Dimensions Lxwxh m: 9.7 x 2.4 x 2.4 machine weight kg: 30,000/8000

Battenfeld Unilog Control 9000 B

Complete injection unit with 40 mm screw Repair required

with spare screw, high-pressure hose and various spare parts - see pictures

various spare parts incl.

Key data: 2000 , 491 , 50

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: Unilog 4000 B Clamping force/clamping force: 2000 kN Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 800 mm x 800 mm WZ height/mould hight: 200 mm max 520 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 970 mm Auger/screw size: 50 mm Stroke volume/shot volume: 540 CC / 491 gram PS spec. Spritzdr / injection pressure: 1822 bar General / General engine power: 30 kW Heating/heating power: 15.6 kW Dimensions/dimensions: 5.65 m x 1.45 m x 2.10 m Weight/weight: 10400 kg screen text/language: English additional equipment/additional equipment Core puller / core pulling: x 3 Lubrication lubrication / Central

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

Key data: 350 , 50 , 30

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

New screw and barrel for Battenfeld .../1900 injection unit 55 mm diameter complete with heaters and screws in the factory box.

Little used screw for Battenfeld .../1900 injection unit 65 mm diameter

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

Materials: PP, PS // Film Width (Max): 850 mm

The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.

2 injection molding machines BATTENFELD HM 65/210 The injection molding machines are fully operational, they are constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 52,000. The price is for one injection molding machine.

Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition

Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500

Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine

Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine

TM 1600/1000 Plastic Injection Molding Machine 160 tons Width between columns 53cm, height 50cm Brand: Battenfeld 2000 model

Battenfeld TM 1300/750 injection moulding machine 130 tons Width between columns 47cm, height 46cm Brand: Battenfeld 2000 model

TM 2500/750 Plastic Injection Molding Machine 250 tons Width between columns 57cm, height 55cm Brand: Battenfeld Year : 2000

TM 2700/1330 Plastic Injection Molding Machine 270 tons Width between columns 64cm, height 62cm Brand: Battenfeld Year : 2004

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R WITTMANN BATTENFELD injection molding