bar feed used for sale

Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec

Closure feeder consisting of trough pick-up and conveyor belt

Serial No.: 001 // M.Nr.: 003

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

REF-2527-2528 INDUFLEX ICS II TWIN CAP SORTER AND FEEDING SYSTEM 2 UNITS IN STOCK Screw cap sorting and feeding system composed of a twin hopper and a twin elevator conveyor. The elevator transports the caps towards the outfeed in the correct direction and position by means of Jetstream conveyors. Manufacturer: INDUFLEX Model: ICS II Serial numbers: 6026 / 6031 Year: 2006 Throughput: 2 x 12,000 caps/hour Power supply: 230-400 V / 50 Hz / 3Ph+N+PE Electricity consumption: 32 kVA Compressed air pressure: 0.63 Mpa / 6.3 bar Overall dimensions: width 1,450 mm, length 3,100 mm, height 2,700 mm Adjustable-height outfeed Weight: approx. 750 kg

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

Type Conveyors / Feeders Height 2050 mm Width 1470 mm Length 1600 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Strip Material: Stainless Steel Tray dimensions 185 x 185 mm

Max. size= 52 x 36 cm, Availability= 062024, Envelope feeder Compatible with all small size printing machines - No mechanical changes to the printing machine necessary. No synchronization setting necessary. Absolutely shortest setup time. Efficient use from 1000 envelopes. Extremely simple operation. Technical data Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Electrical: 220 V, 50 Hz, 1,3 A LOT Loaded in truck or container

Falzmaschine - Flat Pile Folding Machine Stahl T52/4-4-SAK66 Year 1988 - Serial-No. 36336-88-148120 Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzmaschine - Flachstapelanleger - Folding machine - Flat Pile Feeder Stahl T 52.3/4-T-F-KB Year 1994 - Serial-No. 88139-246736 Flat pile feeder 1. Folding unit 4 buckles 2. Folding unit 1 knive Counter Anti noise hoods Stream Delivery Include compressor-pu Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzmaschine - Folding Machine MBO T45-1-45/4-KB Year ca. 1988 - Serial-No. 01/124 Folding width max. 450mm 1. Folding Unit 4 Buckles 1. Folding Unit 1 Knife Machine Control MBO MCC2 Stream Delivery Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kran für Sammelhefteranleger - Crane for Saddle Stitcher Feeders Müller Martini 3.060.054 Payload maximum 300 KG Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feeder Baujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mm Aussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz für Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed station Ratiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rückenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heißleim / Hotmelt side gluing unit Fälzelstation / Back Lining station Buchblock- und Ganzpresse FM 405 für fadengeheftete Bu ...

Shore: , shore convenient to (producer): Gubisch 0 Wheel diameter: 140 mm Wheel width: 30 mm New Gubisch feed rollers --------------------------- 7 pieces 140 x 30 mm -------------------------- Price per piece: 126.00 euros Total price from stock: 882.00 plus shipping and VAT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 6 mm plate length: 0-6000 mm speed: 90 m/min material cross-cut: 1200 mm² total power requirement: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 4 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc.

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg

Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Feeding control, controller, level controller, control -Manufacturer: H. Grote Stall- und Melktechnik, Futtersteuerung -Type: TF 38/50 -Dimensions: 220/120/H250 mm -Weight: 2.4 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Bolt Feeder TUCKER / EMHART ETF50D 10.70/5.7-32 T044 020/500 500 V New ! Dimensions: 510 x 500 x 500 mm

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Bolt Feeder TUCKER / EMHART ETF53D 10.00 / SWB11 T044 322/500 500 V New ! Dimensions: 450 x 500 x 490 mm

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Bolt circle: Ø 105 x 10 mm -Dimensions: Ø 162 x 25 mm -Weight: 2.4 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Circular Screen Feeder Haendle Type BRSH 15 A

Cardboard stacker for Euro pallets as an intermediate layer

- Container volume: 900 litres - With system - for triple outlet - For corks, crown corks and screw caps - With one Terminal

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Counter: 220,000 sheets Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times.  ...

Tub diameter 1900 mm Collection plate diameter 3200 mm Output depending on material 45 cbm/h

Part No.: 950 024 014-02 // Ser. No.: 706DGY00306 Equipment / Additional information: Media format: max. 330 x 788 mm // min. 210 x 210 Media stack height: 500 mm Throughput: A4: 18 000 sheets/hour (100gsm) Grammage: max. 400 gsm / min. 60 gsm Media thickness: up to 600 microns Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supp ...

Drive power 75 kW, 1450 rpm Central shaft 6 rpm

Collection plate diameter 1900 mm Volume throughput 12 cbm/h

Quick change chuck SPV MK5 quick-change chucks MT5 Manufacturer SPV Tools - Spintec AB. Made in Sweden. JAHRL SELF-LOCKING QUICK CHANGE TOOL SYSTEM for drilling, countersinking, spotfacing, reaming and tapping. JAHRL SELF-LOCKING QUICK-CHANGE SYSTEM for drilling, countersinking, countersinking, reaming and threading. 1.) SPV SA-2 1/2 E NC - Jahrl - Quick Change Chucks 2.) SPV 96619-E-DIN 1806 - Jahrl - Quick Change Chucks 3.) SPV 95172. 4.) SPV 95172 5.) SPV 95173 6.) SPV 95174. 7.) 80-5-2 – Adapter with internal Morse Taper – MK (MT) 5 8.) 80-5-3– Adapter with internal Morse Taper – MK (MT) 5 9.) 80-5-3– Adapter with internal Morse Taper – MK (MT) 5 10.) 80-5-3– Adapter with internal Morse Taper – MK (MT) 5 11.) 80-5-4– Adapter with internal Morse Taper – MK (MT) 5 12.) 80-5-4– Adapter with internal Morse Taper – MK (MT) 5 13.) 80-5-5– Adapter ...

Screen round feeder with the new vat and overweight gearbox. Tub diameter 1900 mm Throughput capacity 45 cbm

roles: 3; speeds: stepless;

turning diameter: 60 mm turning length: 200 mm number of slides: total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.