bar feed used for sale

Diaphragm feed pump, diaphragm pump, chemical pump, water pump SERA GmbH R411 Nominal flow rate: 0 - 120 l/h Nominal stroke frequency: 100 per min Permissible back pressure: 4 bar Allowable pressure in pump inlet: -0.3 / 0 bar Engine: SEW RF30DT71C4 0,25 kW 1400 / 108 rpm 220 / 380 V 3AC 50 Hz IP44 used, tested ! Dimensions: 325 x 220 x 420 mm

Diaphragm feed pump, diaphragm pump, chemical pump, water pump SERA GmbH R411W Nominal flow rate: 0 - 120 l/h Maximum suction height: 80 mWS Engine: SEW RF32DT71D4 0,37 kW 1380 / 148 rpm 220 / 380 V 3AC 50 Hz IP55 used, tested ! Dimensions: 320 x 220 x 510 mm

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Vibratory feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) diameter: 200 mm gutter width in boiler: 3 mm Height base: 120 - 160 mm (adjustable) Diameter Base: Ø 91 mm Voltage: 220 V Frequency: 50 Hz used, checked ! Dimensions: 300 x 230 x 430

Vibratory feeder, sorting vibrator, MEHAG 2,5L Diameter: 220 mm gutter width: 20 mm Power: 50 VA voltage: 220 V Frequency: 50 Hz used, tested ! Dimensions: 270 x 250 x 180 mm

Vibrating feeder, sorting vibrator MEHAG 1 R Diameter: Ø 150 mm gutter width: 12 mm 220 V 40 VA approx. 0.4 m Connection cable used, tested ! Dimensions: 200 x 180 x 200 mm

Vibration feeder, sorting vibrator, without boiler SORTIMAT SM 3 ( SM3 ) diameter: 200 mm voltage: 220 V frequency: 50 Hz approx. 0.3 m connection cable used, tested ! without boiler ! Dimensions: 220 x 220 x 150 mm

Wire Feeder Unit, Wire Feeder, Wire Feeder PAGUS Ø 0,75 mm Wire diameter: max. Ø 0.75 mm Feed roller diameter: Ø 18 mm drive motor: MINIMOTOR S.A. 975545 Gear ratio: 308 : 1 with coil holder for core diameter: Ø 10 - 30 mm, coil width: 50 - 95 mm used, tested ! Dimensions (wire feeder): 120 x 80 x 85 mm

Wire feeder unit, wire feeder, wire feeder PAGUS Ø 4 mm Wire diameter: max. Ø 4 mm with worm gear: Gear ratio: 31,5 : 1 Feed roller diameter: Ø 35 mm drive shaft: Shaft diameter: Ø 10 mm shaft length: 15 mm groove width: 18 mm Flange: 62 x 90 mm New ! Dimensions: 150 x 115 x 62 mm

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Vibration feeder, sorting vibrator, REINHOLD JAHN APPARATEBAU SAZ 280 / 350GU ( SAZ280/350GU ) Diameter: 345 mm gutter width in boiler: 25 mm Current consumption: 1.82 A Voltage: 220V Frequency: 50 Hz used, tested ! Dimensions: 530 x 390 x 335

Vibration feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) diameter: 200 mm gutter width in boiler: 12 mm Height foot: 120 mm voltage: 220 V Frequency: 50 Hz used, tested ! Dimensions: 260 x 210 x 370

Manufacturer: Comatic, Bauyeshr : ca.1995, Feeding by belt: yes, Main engine kW: 1,5, Speeds: 4-8-12-24, Stand: yes, Year :ca.1995

Wire feeder unit, motor for wire feeder O.S.L.V. ITALIA type 12810 motor: 42 V DC transport wheels: Ø 40 mm used, tested ! Dimensions: 320 x 220 x 250 mm

Bolt feeder TUCKER / EMHART ETF50D 10.70/5.7-32 T044 020/500 500 V New ! Dimensions: 510 x 500 x 500 mm

Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!

diameter range 25 mm wire feed 9,5 m/min max. coil weight 2000 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 2x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Inv. Num. : 4723 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Maximum turning diameter: 260 mm Tool holder: 12 pieces Lathe length: 3800 mm Lathe width: 2100 mm Lathe height: 2400 mm Lathe weight: 7000 kg

Inv. Num. : 5794 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens Maximum turning diameter: 250 mm Maximum turning length: 100 mm Axis X: 680 mm Z axis: 200 mm Nominal current: 35 kW Weight: 7500 kg

Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: Multigraph PFA 52 Bow feeder - Format: max. 520x750mm; min. 120x120mm - Paper types: 60 g/m² to 500 g/m² – depending on substrate - Paper stack height: 600mm - Current: 100 - 240 VAC, 50-60 HZ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

Rotary feedthrough, rotary outlet, rotary distributor -for hydraulics -Number: 2x large passage -Number: 8x control line, smaller passage -Dimensions: 350 x 400 mm -Weight: 45 kg

Weber spiral conveyors as feeding technology for Weber screwdriving systems, suitable for any application in the field of feeding fasteners, etc. Offer refers to a spiral conveyor. Other spiral conveyors of the same design are available.

Basic feed unit -BUG623-56-54-E-000 -Power: 36 kW -Converter to supply the -Intermediate circuit of the power modules -BUS 62 X -Number: 2x available -Price: per piece

Feed technology, feed device, storage container with automatic feed -Automatic feeder with storage container -The device was built for the production of electric clamps -Dimensions: 1300/1400/H1200 mm -Weight: 260 kg

Pamasol 5934 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 5-lane, with 1-lane output - Drive with infinitely variable geared motor - Suitable for continuous operation in hazardous areas - Electric drive unit Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 80 x 210 cm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.

• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Barcode reading leaflet • Ejection of bad leaflet with ejection counter-check • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller insertion, reel, discharge reel, motor reel for sheet metal processing, motor reel, uncoiler, sheet metal unwinder, strip feed system, strip system for eccentric press, hydraulic press -Profiling system: roller insertion with cooling water/hot water device, made from slats/blinds production -Seal heads: maier type DX 215 L / DX 215 R -Rolls: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimension: 1120/405/1310 mm -Weight: 312kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, 8-channel digital input terminal -Type: 750-431 -Number: 1 piece available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Wago, potential feed terminal -Type: 750-602 -Number: 1 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

Power supply rails, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, potential feed terminal -Type: KL9100 -Number: 3 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1418 -Number: 7 pieces available -Price per piece -Dimensions: 15/67/H100 mm -Weight: 0.1 kg/pcs

Feed for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press -Round material feeding system: round steel feeding system with console -Feed: Lenze 2.2 kW drive type MDXMA2M 090-31 -Belt tension: pneumatic -Material tension: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic unit: can be included for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 420 mm -Table recess: 340 x 205 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 395 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Punching device: incl. 4 column punching tool Matocapco MOR, see photos -Dimensions: 1650/1920/H2300mm, 420/1000/H980mm, 700/600/H1050mm -Total weight: approx. 3200 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 415 mm -Table recess: 195 x 340 mm - Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 400 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Dimensions: 1620/1715/H2250mm, 420/1000/H1110mm, 700/630/H1050mm -Weight: 2860kg, 143kg, 104kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal -Type: KL1408 -Number: 6 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, digital input terminal -Type: KL1104 -Number: 4 available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Four-jaw chuck: Chuck size: Ø 250 mm with tube turning device -Throughout: Ø 80 mm -Pitch circle: Ø 226 mm -Weight: 25 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg