Heavy production box stand drill in good condition Drive: via manual manual transmission in 12 stages Speeds: from 23 rpm to 930 rpm Drilling capacity in steel: 85mm Feeds: 0.1/ 0.7/ 0.14/ 0.2/ 0.28/ 0.4/ 0.56 mm/U Drilling slide stroke: approx.: 450 mm Discharge: approx.480mm Tool holder: SK 50 Table base: w x t 800 x700mm Total dimensions: w x t x h 1100mm x 1900mm x 2900mm Betmzzmzce Electrical connection: 380V / 50 HZ Accessories / Optional equipment: Control for pneumatic round table, this is optionally available if necessary. Comments: The machine is in good condition and is still in the original paint. It is designed for use in series production. The machine is ready to be visited in our warehouse under electricity.
High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 212, built in 1982Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Cooling device type B with separate tank with pump- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle head- Coolant inlet via distributor with inlet to eachxa0xa0 Spindle of the MSK with 1 cock each- Feed unit for drilling carriage movementused, in good conditionPrice on request.Delivery: ex warehouse or location fre ...
High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 312 Year 1986Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx. 530 kgWith- semi-automatic work process- electrically controlled jump feed- Switch cabinet- swiveling operating part- Central lubrication- Coolant device- electr. controlled free-cutting device- semi-automatic threadingxa0xa0 by means of Leit cartridge deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...
High performance vertical boring machine make ALZMETALL type Abomat 20Machine -No: 273, built in 1985Drilling capacity in St / GG: 25/30 mmOutreach: 280 mmSpindle mount: MK 38 speeds: 160 - 1800 rpm.6 feeds: 71 - 180 mm / min.Table mounting surface: 400 x 500 mmDrilling carriage stroke: 800 mmRapid traverse speed: 4.5 m / min.Weight approx: 530 kgDrive power: 1.45 / 1.9 kWWith- Multi-spindle head- Cooling device type B- Semi-automatic tapping attachment with guide cartridge- Connection flange for mounting a multi-spindle headxa0xa0 with distributor and flexible inlet pipes with stopcock- Feed unit for drilling carriage movement- swiveling operating part- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like ...
Column drilling machine automatic drilling machine manufacturer Alzmetall Type Abomat 20 Year of construction 1992 Without the pictured cross table Box tour Speeds can be switched via gearbox. Fully functional to see under power
High performance horizontal boring mill make ALZMETALL type Abomat 30Machine -No: 346, built in 1981revolver drill headNumber of tool holders: 6-foldDrilling capacity: 35 mmDischarge: 330 mmSpindle mount: MK 4Longitudinal table: size 500Adjustment travel: 540 mmRotary tableOperation: manual-hydraulicDiameter: 600 mmfurther techn. Dates:Machining length min / max: 470/1170 mmInsert height of the workpiece: 1223 mmTop height: 235 mmMain motor: 3.2 kWHydraulic motor: 1.5 kWFeed rate: 1.1 kWExternal dimensions: 3000 x 1700 x 2100 mmSpace required incl. Hydraulic and control cabinet approx .: 4000 x 3000 mmWeight approx. 2.5 tonsWith- 6-fold turret GRAS type ARBO 308- Dividing head Fibrotact Y51 400 UN2RA graduation 2; 3; 4; 6; 8; 10; 12; 16; 20; 24; 240smallest partial angle 1.5 °- FIBRO rotary indexing table MY13 800NRA manual-hydraulic, smallest part angle 1 °- Feed FORKARDT F 400- slide ...
Vertical Boring Mill Fabr. ALZMETALL Type ABOMAT 35Machine No: 313 Year 198617155 operating hoursDrilling capacity in steel ST 60: 45 mmDrilling capacity in cast GG 20: 60 mmDrilling capacity steel ST 60: 60 mmThread cutting steel ST 60: M 42Thread cutting Cast GG 20: M 60Long spindle with cross wedge fracture: MK 4Discharge: 330 mmTable mounting surface: 560 x 450 mmBoring stroke: 700 mmRapid traction motor n = 150 min: 1.1 kWFeed motor: 0.25 kW n = 3000 minRapid traverse speed: 4.75 m / minFeed: 0.04 / 0.05 / 0.07 / 0.10 / 0.14Feed size optionally: 0.20 / 0.28 / 0.40 mm / revDrive power: 4.0 kWSpindle speed: 56-2500 rpm.Weight approx .: 1300 kgWith- 6-spindle head ARBO 30No. 139, built in 1989used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...
size of profile - max.: 150 mmNumber of drilling agregates: 1 Stk.bore diameter: 35 mmquill stroke: 140 mmspindle taper: MK 4 column diameter: 120 mmthroat: 300 mmdistance spindlenose - table min./max.: 50 / 600 mmspindle turning speed range: 14 / 45 - 1650 U/minimpact length: 2000 mmbase plate: 420 x 420 mmMax. speed ot the feeder: 200 mm/secpositioning accuracy: auf 3 m +/- 0,2 mmair consumption: 6 barCarrying capacity feeder: 45 kgMin. distance hole/end of material: 30 mmtotal power requirement: 1,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: ca. 2,5 x 0,7 x 2 mVideo available on our website.: Electric 400 Volt: Cooling equipment (Micro-Cooler): Luft - Öl Protection made in plastic: Controlled SERIES DRILLING MACHINE with 3 automatic spindel feeds inconjunction with the automatic speedy feed system suitable for pipe andprofile material.The machine drills aut ...
2 drilling units with control Work cycle is triggered when the cover is closed Pneumatic feed Pneumatic workpiece tension Very good condition Various drill pots multi-spindle drilling heads are available Suhner Bohrmaster Siegloch and Schrieder
bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 170 mmturning speed range - stepless: 60-1800 U/mintable-size: 550 x 450 mm mmcoolant: ja total power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Linear Drilling and Tapping Machine make IXION type PC 1-6000 BT 30 ST / GSEYear of construction 12/1999 for long part machining machine no. 240028Continuous drilling capacity: 30 mmNormal drilling capacity: 35 mmTapping performance up to: M 30Spindle mount: MK 3Spindle speeds stepless: 160 - 2800 rpm.Outreach: 280 mmDrilling depth: 150 mmDistance spindle to table: 220-600 mmRapid traverse: 6 m / minColumn diameter: 120 mmDriving accuracy: + - 0.1 mmTable surface: 390 x 420 mmWorkpiece weight: 60 kgDrive power: 1.3 / 2.3 kWDimensions: 9500 x 1500 x 1850 mmWith- hydr. pneumatic feed unit VF 22- Height adjustment from the front- Anti-twist device- Minimal quantity lubrication system- Thread cutting device- digital depth and speed display- Transversal travel of drilling unit 250 mm programmable- single-acting pneumatic vice- Pinion feed unit for semi-automatic drilling, steplesshydrauli ...
Machine as seen in photos, fully functional with documents.
Selectomat System Schlatter RMB EMBA 18
Drilling machine make RUSS type 86-185Machine -No: 287 built in 1986Spindle mountings: ISA 40Discharge: 300 mmDrilling stroke: 200 mmTable size: 400 x 300 mmOutside dimensions approx: 900 x 1200 x 2200 mmWith- Manual operation- aut. operation- infinitely variable speed and feed control- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
The machine is in good technical condition, by prior arrangement the possibility of a test drive.
bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1 mmspindle stroke: 150 mmturning speeds: 80_2000 / 51-100 U/mintotal power requirement: 2,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1200x2400x2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
