atlas compressor used for sale

Variable speed drive. Volume flow 1.9 - 17.07 m3/min. at 7.0 bar.

With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.

Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.

Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.

Variable speed drive. Volume flow 12.4 - 50.5 m3/min. at 7.0 bar. Air end 1x replaced.

With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.

Variable speed drive. Volume flow 0.95 - 5.58 m3/min. at 7.0 bar. With energy recovery. Without refrigerant dryer!

Oil-free. Water cooled. Variable speed drive. Volume flow 22.0 - 79.0 m3/min. at 7.0 bar.

With built in compressed air refrigerant dryer. Refrigerant R404a. According to previous owner compressor has about 22000 working hours only.

Stroke: 750 mm Make Atlas shaping Type W 7 Year shaping / kurzhobel hobel maschine Stroke = 750 mm X / Y = 490 x 500 Stroke tool holder = 175 Head rotation + / - 60 Gr.- Table = 560 x 480 - Speed 12 - 132 M/min

Variable speed drive. Volume flow 4.7 - 27.10 m3/min. at 7.0 bar.

Hydraulic lifting crane with two supporter feet, and a turntable Splited telescopic cranehand, without hydraulic power supply. Manufacturer: ATLAS Load Capacity: 2,0 t Horizontal Reach: 6,0 m Reach height: 5,0 m

Variable speed drive. Volume flow 12.4 - 50.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 404a. Air end 1x replaced.

feed pressure: 8 bar liter capacity: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter DDX 40 Part number: 2901121100

Filter PDx 40 Part number: 2901086400

Vacuum Pump ATLAS COPCO Model. GHS350VSD+.

Description Atlas Copco GA 90 VSD Screw compressor, speed-controlled WorkPlace Full-feature-(D)version, with water cooling Motor power 90 kW Drive motor IP 55, insulation class F high-efficiency gearbox Frequency converter max. operating overpressure 4-13 bar Volume flow 32-287 l/s GA 90 VSD Oil-water separator OSD 110 electronic condensate drain EWD boiler 3000 liters

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Pressure power: 10 bar Pressure power: 150 l/min. tank: 150 l cylinder: St. With tank from Boge 150 litersThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: 2022-565 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Specifications: producenter:Atlas Copco Condition: ( very good ) Model : QAS150 Condition: ( very good ) Engine : Volvo Penta 6cylinder Terbo diesel water-cooled. Power : kw/120/KVA 150 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Operating hours : approx. 10400h Year built:2007 Shuro - CEE 16 A 1× 400 V - CEE 32 A 1× 400 V - CEE 63 A 1× 400 V - CEE 125A2 400v -Precaution - Length 3.35mm - Width 1.20 mm - Height 1,70 mm/2500Kg - Complete with control Incl. diesel tank in the base frame Immediately ready for use Delivery nationwide possible for an extra charge Adam Power Systems GmbH Power generator of all kinds Werkstraße 16, 24848 Kropp

Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1 m³/min , Volume flow at 4 bar: 1 m³/min, Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4.3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New ! Dimensions: 590 x 120 x 45 mm

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 81 regenerated ! Dimensions: 230 x 240 x 45 mm

Servocontroler ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 80 Dimensions: 310 x 240 x 45 mm

Water separator ATLAS COPCO WSD 750 1613-6728-00 PB 20 TB 70 Volume: 8.6 l used, tested ! Dimensions 600 x 210 x 200 mm

Air branch block, porting block kit, 2 pieces ATLAS COPCO MIDI OPTIMIZER 9093 0022 03 operating pressure: 0 - 16 bar connections: 1/2 new ! Dimensions ( single air branch block ): 63 x 63 x 68 mm Dimensions ( packaging ): 160 x 140 x 70 mm

Radiator, heat exchanger ATLAS COPCO 1617-0004-00 0653.725.0000 0653.731.2100 pmax.: 10.57 bar Connections: Ø 20 / 80 mm Flanges: Ø 200 mm, 100 x 100 mm Fittings: Ø 32 mm Radiator made of aluminum used, tested ! Dimensions: 1050 x 500 x 1030 mm

year: 2015 max. working pressure: 42 bar rated power: 37 kW rotational shaft speed: 401 r/min. Keeping your production up and running 24/24 Designed for industrial service 24/24, Atlas Copco DX/DN compressors work reliably at all times without the need for constant supervision. Their sturdy design leads to extremely low vibration levels. Proof of their reliability can be found in the thousands of machines installed in the field, where they provide a smooth and reliable supply of air or nitrogen. Protecting your process with oil-free technology Oil-free compression safeguards the quality of the compressed air and nitrogen. In most applications, even the slightest pollution is unacceptable and could lead to high risks for your production. Atlas Copco supplies the highest quality of air and nitrogen with boosters certified to Class 0 according to ISO 8573-1.

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Year of construction 2014, 30 kvA, nominal voltage: 400 V, nominal current: 43.3 A, on a single axle chassis with articulated drawbar and overrun brake, 1100 kg dead weight

Backhoe bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Admission intermediate dimension: 255/200 mm -Bore: Ø 45/50 mm -Ripper teeth -The mounting on the spoon can be changed by us at an additional cost -Own weight: 160 kg

Backhoe bucket, excavator bucket, demolition bucket -Execution: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Admission intermediate dimension: 160 mm -Bore distance: 220 mm -Bore: Ø 45 mm -extended cutting edge -The mounting on the spoon can be changed by us at an additional cost -Own weight: 130 kg

Side dump bucket, wheel loader bucket -Wheel loader shovel -Shovel inside: 1850 x 670 x 800 mm -Own weight: 480 kg -Execution: stable -Admission inside: 860 mm -suitable for: Atlas

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 200 mm -Piston rod: Ø 40 mm -Total dimensions: 330/280/H510 mm -Weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 600 mm -Shovel length open: 1400 mm -Total height: 1900 mm -Admission inside: 270 mm -Support for bolts: Ø 60/70 mm -Weight: 750 kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1 piece available -Dimensions: 630/480/H120 mm -Weight: 24kg

Hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm

Atlas Copco ZA 6 Oil-free, water cooled. Only 1477 working hours! Condition like NEW.

Re-Alarm Box, Display Unit ATLAS COPCO RE-ALARM BOX 01F 8431 0455 36 approx. 4.9 m Connection cable with plug as good as new ! Dimensions ( without cable ): 125 x 75 x 75 mm Dimensions ( packaging ): 200 x 200 x 90 mm

Atlas crane AK3500, built in 1990, length 5.00 m, with extension 6.50 m, in need of slight repair Net price 1.500,00 E

Year of construction 2004, 1060kg own weight, diesel, 7 bar