aluminium rolling mill used for sale

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Technical data Min. diameter threaded: 27 mm Max. diameter threaded: 90 mm Min. pitch: 1 mm Max. pitch: 6 mm Max. infeed length: 68 mm Max. roll die diameter: 150 mm Roll die width: 35,70 mm Max. rolling force: 17 to Roll axis swivel for thru-feed: 3 ° Shaft diameter: 54 mm Roll speeds: from: 150 rpm up to: 500 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 7.5 kW Machine´s weight about: 2420 kg Overall dimensions machine: Length: 2200 mm Width: 1900 mm Height: 2000 mm

Technical data Min. diameter threaded: 10 mm Max. diameter threaded: 75 mm Min. pitch: 1 mm Max. pitch: 10 mm Max. infeed length: 148 mm Max. roll die diameter: 200 mm Roll die width: 35,70,100,150 mm Max. rolling force: 60 to Roll axis swivel for thru-feed: +6/-6 ° Shaft distance: min.: 195 mm max: 275 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 50 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 18.75 kW Machine´s weight about: 4700 kg Overall dimensions machine: Length: 2450 mm Width: 2300 mm Height: 2250 mm

Technical data Min. diameter threaded: 8 mm Max. diameter threaded: 50 mm Min. pitch: 1.0 mm Max. pitch: 6.35 mm Max. roll die diameter: 178 mm Roll die width: 35 -150 mm Max. rolling force: 40 to Shaft distance: min.: 170 mm max: 230 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 11/3.65 kW Machine´s weight about: 2750 kg Overall dimensions machine: Length: 2000 mm Width: 1450 mm Height: 1800 mm Various accessories: Set of thread rolls Lamp Set of service tools Foot pedal

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Technical data Min. diameter threaded: 4 mm Max. diameter threaded: 20 mm Min. pitch: 0.5 mm Max. pitch: 2.5 mm Max. roll die diameter: 118 mm Roll die width: 50 mm Shaft distance: min.: 100 mm max: 135 mm Shaft diameter: 40 mm Roll speeds: up to: 80 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 2 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1170 mm Width: 740 mm Height: 1050 mm Various accessories: Set of thread rolls Lamp Set of service tools

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

Length: 2600 mm Roll diameter: 10 mm Axial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Max. circling length: 3100 mm Max. metal sheet thickness: without pre-bend - 6 mm Upper cylinder diameter: 200 mm Side cylinder diameter:: 190 mm engine tilt:: 4 kW Engine hours worked: : about 60-80

CNC bending line for bending sheets up to a thickness of 8 mm and a width of 2500 mm. The machine is being sold due to its lack of use, it was practically unused. the machine is connected, functional and can be demonstrated in action.

Max. length of plate 2050 mm Max. plate thickness 4 mm Number of rolls 3 pcs Upper roll diameter 136 mm Lower roll diameter 136 mm Max. pre bending capacity 4 mm

Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

Qty. 1 Second-hand copper rolling mill Material: Copper & Copper Alloy (Pbc, Etc.), Aluminium, Etc. Manufacture: Hitachi(Japan) Type: 4-Hi Reversing Rolling Mill Strip Width: Max 450 mm Thickness: 0.3 mm ~ 4.0 mm (Copper) Line Speed: 100 m/min. Coil Weight: 5,000 kg Manufacturing Date: 1963 1st Revamping Date: 2008 2nd Revamping Date: 2010 3rd Revamping Date: 2020. 05 Revamping: Mill Housing Clean & Painting Improvement of Screw Down System (Ram Cylunder --- Geared Motor) Change of Deflector Roll & Press Plate Right/Left Reel: Increase Capacity Right Reel: 30 kW, 200/500 RPM – 110 kW, 650/1,800 RPM, Left Reel: 30 kW, 200/500 RPM – 75 kW, 400/1,500 RPM Change of Drive for 2-Coil Car: Hydrauric Cylinder – Geared Motor

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V

Thread rolling machine make JW FRÖHLICH type GWZ 24/140Machine -No: 241401016 Year 1984Thread rolling performance: M8 - M24Shaft length: 230 mmNumber of cycles: 20 / min.Operating pressure: 130 barDrive power: 18.5 kWWith- FeedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm

YEAR 2013 THREAD ROLLING MACHINE EXCELLENT CONDITION

Usable roll width: 420mm, roll diameter: 10-73mm, output: 50 cycle/min, connected load: 1.4kW, length: 1035mm, width: 1084mm, height: 1620mm, weight: 363kg, operational hours counter: 400h, with documentation.

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

CNC Thread Rolling Machine - Thread Rolling Machine Thommen PR17 CNC 2 wheels Rotation speed of the rollers electronically controlled Position and speed are managed electronically Spindle diameter 54 mm 2 pairs of columns (closed and open) The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

Thread rolling tool, threaded roller set, thread rollers, thread rollers Manufacturer: IKON Thread designation: M14, Right Roller outer diameter: 166 mm Roll width: 160 mm Bore diameter: 70 mm Suitable for spindle diameter: 69.85 mm Reground good condition We have over 100 different rolling tools from different manufacturers in stock: PROFIROLL, PEE-WEE, IKON , EMUGE, MAPAL, GROB, GEMA, HSV and others suitable for thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine manufacturer PEEWEE, Profiroll, SENY, GROB, Wanderer etc.; used

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

rotary drum feed diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

Trolley STAHL used, tested ! Dimensions: 330 x 240 x 250 mm

Trolley PAGUS used, tested ! Dimensions: 340 x 240 x 250 mm

Trolley, trolley, single-bolt trolley HADEF 19 / 71 load capacity: 1500 kg Beam width: 50 - 135 mm Bolt diameter: Ø 30 mm used, tested ! Dimensions: 230 x 210 x 195 mm

MAX CAPASITY 20 T

Chain hoist with trolley, trolley DEMAG TYP DK2-250-K-V-F4 Bj: 1992 Payload: 500 kg Lifting speed: 4 / 1 m/min hook travel: 3 m Control cable: 1,, 5 m Voltage 380 V IP55 Chassis: RU 6 DK Flange width: 140 - 200 mm used, tested ! Dimensions: 500 x 300 x 600 mm

3 rolls thread rolling machine diameter range 25-100 mm Forging power 24 to thread length plunge method oo max. pitch 8 mm

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

Combined precision roller bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 70130 ( ARNB70130 ) INA No. ZARN 70130 TN ( ZARN70130TN ) Shaft diameter: Ø 70 mm outer diameter: Ø 130 mm bearing thickness: 82 mm New ! Dimensions (package): 150 x 150 x 110 mm

Combined precision roller bearing, axially preloadable, needle-axial cylindrical roller bearing NADELLA ARNB 55115 INA No. ZARN 55115 TV shaft diameter: Ø 55 mm outer diameter: Ø 115 mm bearing thickness: 82 mm New ! Package dimensions: 135 x 135 x 110 mm