alu capper used for sale

Key data: 30 , 10 , 5

We offer: - ALUP Allegro 31 screw compressor with integrated refrigerant dryer. - Power: 30 KW 10 bar / 5.33 m³ per minute. - Year of manufacture: 2015 / 26192 operating hours / last maintenance was at 25163 operating hours. - First commissioning 01/2016. - For other technical data, please refer to the picture of the type plate. - Device is in perfect condition is only sold because the great power is no longer needed !

SCREW COMPRESSOR ALUP LARGO 76 75Kw 2014r ALUP LARGO 76 screw compressor after service Specifications: capacity:14.2 m3/min; 75KW motor; pressure; 7.5bar; process; 8236h; Year; 2014 compressor fully operational, net price: 34500 PLN gross price: 42435 PLN

ALUP SCK15-10 11KW SCREW COMPRESSOR ALUP SCK15-10 screw compressor machine after service Specifications: capacity: 1.49 m3/min; 11KW motor; pressure max. 10; mileage 45566h; compressor fully operational, net price: 5200 PLN gross price: 6396PLN

SCREW COMPRESSOR ALUP LARGO 30 30Kw ALUP LARGO 30-10 screw compressor after service Specifications: capacity:4.68 m3/min; 30KW motor; pressure max. 10bar; process; 8236h; Year; 2013 compressor fully operational, net price: 19500 PLN gross price: 23985PLN

SCREW COMPRESSOR ALUP LARGO 15 15Kw ALUP LARGO 15-8 screw compressor after service Specifications: capacity:2.58 m3/min; 15KW motor; pressure max. 8bar; process; 9341h; Year; 2011 compressor fully operational, net price: 13800 PLN gross price: 16974PLN

SCREW COMPRESSOR ALUP ALLEGRO 30Kw INVERTER 14r ALUP ALLEGRO 30-10 screw compressor machine with inverter after service Specifications: capacity: 4.92 m3/min; 30KW motor; pressure max. 9.7bar; year; 2014 process; 8236h; compressor fully functional, warranty, net price: 24500 PLN gross price: 30135PLN

SCREW COMPRESSOR ALUP LARGO 26 26Kw 2017 ALUP LARGO 26 CE screw compressor after service Specifications: capacity:4.02 m3/min; 26KW motor; pressure max. 10bar; process; 4951h; Year; 2017 compressor fully operational, net price: 22500 PLN gross price: 27675PLN

Maximum final pressure: 10 bar Flow rate: 1.98 m3/min. Speed: 3000 rpm. Equipped with: - Air dryer - Compressed air tank 1000 liters Country of origin: Germany Motor power: 15 kW Compressor LxWxH: 105 x 60 x 150 cm Compressed air tank LxWxH: Ø80 x 230 cm

KOMPRESOR ŚRUBOWY ALUP ALLEGRO 37Kw FALOWNIK 2017r Sprężarka śrubowa ALUP ALLEGRO 36+ maszyna z falownikiem po serwisie Dane techniczne: Wydajność: 6.24 m3/min; silnik 37KW; ciśnienie max. 13bar; Rok; 2017 przebieg; 4754h; sprężarka w pełni sprawna,gwarancja, Cena net: 24200 zł Cena gross: 29766zł

COMPRESSOR ŚRUBOWY ALUP ALMIG 115Kw FALOWNIK 11r Sprężarka śrubowa ALMIG VARIABLE 115 maszyna z falownikiem i wymiennikiem ciepła po serwisie Dane techniczne: Wydajność: 3.67-19.48 m3/min; silnik 115KW; ciśnienie max. 13bar; Rok; 2011 przebieg; 18624h; sprężarka w pełni sprawna,gwarancja, Cena net: 48500 zł Cena gross: 59655 zł

Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

Aluminum plates, construction aluminum, price -70%, according to photos, , used We have many aluminum plates with different dimensions. See photos Special price The current purchase price of a new aluminium plate is € 11 to € 14/kg excl. VAT. The selling price of the used plates is € 4 /kg, i.e. -70% A) 1110 x 1100 x 20mm thick, 65 kg B) 1118 x 1100 x 20mm thick, 65 kg C) 1000 x 750 x 20mm thick, 40 Kg machined D) 1000 x 750 x 20mm thick, 40 kg E) 500 x 400 x 25mm thick, 13 kg F) 500 x 400 x 25mm thick, 13 kg G) 1100 x 630 x 40mm thick, 75 kg H) 1360 x 840 x 30mm thick, 76 kg i) D1800/D150 x 25mm thick, 163 kg machined J) 1300 x 1150 x 25mm thick, 85 kg K) 1030 x 840 x 25mm thick, 55 kg L) 890 x 630 x 20mm thick, 30 kg If you have a VAT number, we will be happy to issue you an invoice without VAT. Used The panels come from a dismantling of high-qualit ...

General SKU406S975 LocationBarneveld MakeIndosa Maschinenbau AG (CH) TypeV131 No.16.566 Year of construction2006 Main Features Motor0.55 KW Inlet diameter80 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable fortins Number of closing heads:1 With motor0.55 kW 220/380 volt Pneumatic operatedcheck CapacityDepends on the product Suitable for bottle/jar dia.60-131 mm Suitable for bottle/jar height25-230 mm Information With switchcheck Weight300 Kg CEcheck Floorspace1x1,2M Total height1,8MCappersIndosaPackaging machines > CappersBrand > Indosa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU406S1038 LocationBarneveld MakeBallerstaedt & Co. Rastatt (D) TypePOLYMAT-VARIOSEAL PN No.71.9615.011.1000 Year of construction1996 Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm Information With switchcheck Weight50 Kg Floorspace0,6x0,4M Total height1 MCappersBallerstaedt RastattPackaging machines > CappersBrand > Ballerstaedt Rastatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKUR1059 LocationBarneveld MakeBausch & Ströbel Maschinenfabrik (D) TypeKSF-1020 No.4755 Year of construction1979 Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper MaterialStainless steel Cappers Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm Information With switchgearcheck Total height2,0 M Weight1500 Kg Floorspace4,0x1,2 M Extra Specificationswith additional format parts: Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mm Bottle feeding and sealing machine, without filling installation CappersBa ...

General SKU008A066 LocationBarneveld MakePohl GmbH & Co. KG TypeE No.0003 Year of constructionunknown Main Features Motor0.075 KW Number of1 heads Specified Features - Capper CapperFlanging machine (1x) Single headcheck Suitable for(various size parts) Number of closing heads:1 With motor0,075 KW, 220 Volt (1 Ph) With variable speed drivecheck Information With switchcheck Floorspace0,6x0,5 M Total height0,9 M Weight90 KGCappersPohl & CoPackaging machines > CappersBrand > Pohl & Co What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

Simonazzi Tribblock 100-100 15 100 spray heads, 100 filling valves and 15 capping heads. Performance: 0.5 lt / 32,000 FL/h 1. 0lt / 29,000 FL/h 1.5 lt / 22,000 FL/h 2,0 lt / 18,000 FL/h Machine in very good maintained condition

Zalkin Model: CA3 six head rotary capper Stainless frame, 30mm cap diameter, up to 90 bottles per min, also have a Hema filler that went inline with this, full manuals / electrical drawings

Krones Natural Corker 6 heads

Rinser, filler and capper unit for PET bottles (incl. liquid nitrogen dosage device)

HORMES SOLO-SV

Used Lid Caper CMI, Type: TA 1 PP Brushless - the machine was used for twist-off glasses - can be used almost for any type of vessel - new conveyor belt with motor - incl. some new format parts - Compressed air is required - Power: up to 35 vessels /minute - El. Connection: 400 V, 50 Hz, 3.5 kW - Net weight: 1,200 kg Viewing and test run are possible by arrangement.

Capper BERTOLASO - KAPPA 508 • Year: 1994 • Speed: 9.000 bph • Direction: Clockwsie • 8 heads – plastic upper cap • Safety protections

Capper AROL – STELVIN • Year: 2006 • Speed: 9.000 bph • Direction: Counterclockwise • 6 heads • Screw cap - stelvin 30x60 • Safety protections.

Capper BERTOLASO – Screw • Year: 1989 • Speed: 5.000 bph • Direction: Clockwise • 3 heads • Screw cap • Safety protections

Capper AROL 4T – Stelvin • Year: 1992. • Speed: 6.000 bph. • Direction: Clockwise. • 4 heads. (almost new) • Stelvin cap – 30x60. • Safety protections.

Capper BERTOLASO DELTA 104S • Year: 1981 • Speed: 6.000 bph • Direction: Clockwise • Model: DELTA 104S. • 4 capping heads. • Mushroom cork. • Safety protections.

Capper AROL – pre-threated plastic cork PCO 1881 4 capping heads Suitable for plastic corks PCO 1881 – 28 mm Speed: 8.000 BHP Counterclockwise direction Year 2000 Machine without electrical panel because it worked in sync with the filler

Capper BERTOLASO model Delta 404 Year: 1986 Clockwise direction 4 heads for natural straight corks Speed: 7000 bph Safeti protection

Capper BERTOLASO model DELTA 404 Year:1982 4 Heads Suitable for natural straight corks Clockwise directions Stanless steel faired Manually adjustment height of the heads Safety protection Machine in good condition

Max. operating pressure: 160bar, with foot switch.

Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation.

Output: 1200/h, cap format: 63, 77, with documentation, without cap track and sorting plate.

Number of heads: 8, with spare parts, without documentation.

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

Overview This automatic capping machine for bottles was built in 2010 by Polish manufacturer ZM Robak. The machine is used but in good working condition, being in operation during the years 2010-2015 and 2017-2018. Techn. Data Capacity 2.000 bph for 6l bottles and 38mm caps 9.000 bph for smaller formats (e.g. 250 m) Number of capping heads: 6 units Scope of Delivery Included: Cap transporter with an AROL hopper and a flat conveyor belt Full original documentation, including DTR (Technical Files) and electrical documentation, is available

Tube Diameter (Min): 16 mm // Tube Diameter (Max): 50 mm

Automatic Packaging Machine, Seamer SIAT / BRÜNINGHAUS Type SM8.1 Carton Gluing Machine, Carton Gluer, Semi-Automatic Sealing Machine Fabr. No. 15905 Year of construction 1999 Carton length 160 mm -any Carton height 150-500 mm Carton width 130-520 mm Mains connection 400 volts, 50 Hz, 200 watts - Manual crank adjustment of the lateral conveyor belts for the carton width - Carton feed via conveyor belts on the right and left - manual crank height adjustment of the upper gluing station - Glues the bottom of the box and the top of the box with 2 separate parcel tape stations- 2 gluing units for the processing of self-adhesive tape, width 75 mm- Gluing stations for self-adhesive tape (also for large rolls 300 mm) Space requirement L x W x H 950 x 700 x 1200 mm Weight 120 kg good condition; used

Overview The capper was built in 2009 by Italian manufacturer Arol. The machine is available immediately. Techn. Details Capacity: up to 10.000 bph Clockwise 5 heads Last use:  Prepared for 30x60 caps Working at 4,000 bph with Bordeaux bottle 0.75l

X 418 | CAPPER AROL Year: 2001 Speed: 5.000 bph Direction: Clockwise Model: EURO-VA 3 heads Screw cap 31.5 x 18 Safety protections

X 417 | CAPPER AROL TALOG YEAR: 2017 SPEED: 15.000 BPH DIRECTION: CLOCKWISE 6 HEADS MODEL: EURO VA 6 CAP: TALOG PLC SIEMENS S7 WORKING HOURS: 210 AVAILABLE MANUALS: YES SAFETY PROTECTIONS

X 416 | CAPPER BERTOLASO SIGMA 604 YEAR: 2009 SPEED: 6.000 BPH DIRECTION: COUNTERCLOCKWISE 4 HEADS CAP STELVIN MODEL SIGMA 604 SAFETY PROTECTIONS

X 415 | CAPPER AROL STELVIN YEAR: 1999 SPEED: 2.200 BPH DIRECTION: CLOCKWISE SINGLE CAPPING HEAD COMPLETE WITH VIBRATING CAP DISPENSER 4 BOTTLE FORMATS SAFETY PROTECTIONS MACHINE COMPLETELY OVERHAULED AND REPAINTED

X 414 | CAPPER AROL YEAR: 2006 SPEED: 7.000 BPH MODEL: KAMMA PKV DIRECTION: CLOCKWISE NUMBER OF HEADS: 5 TYPE OF CAP: T” CAP PICK & PLACE DISTRIBUTION SAFETY PROTECTIONS

X 413 | CAPPER AROL YEAR: 1999 SPEED: 7.000 BPH MODEL: KAMMA PK DIRECTION: CLOCKWISE NUMBER OF HEADS: 5 TYPE OF CAP: T” CAP PICK & PLACE DISTRIBUTION SAFETY PROTECTIONS

- Running direction: Left - Right - Swivel upper part of the machine - One-head natural cork - Vacuum sealing - Single-head screw capper, with four-roller head, (28 x 44 mm) - With nitrogen injection before closing - A lot of bottle guide stars, for many formats! - Closure feeder belt elevator - Machine in TOP condition

Overview The solo screw capper was manufactured from Adelski in 2000. As it is not needed any longer in the filling line it is for sale. The machine has one screw capping head . The cap sorting system belongs to the scope of supply. The machine was dismantled recently and is in technically good condition. A change over to a BVS 30 x 60 can be offered on request, same as PP caps. Tech Specs: Capacity: up to 2,500 bph Number of capping places: 1 Working direction: counter clockwise Control: Siemens S7 Processable caps: MCA 28 x 15 and 28 x 44 Accessories: Screw cap sorting system

Overview Automatic screw capping machine PP2008, year of manufacture 2020, less than 300 operating hours. The capping machine is designed for automatic capping of glass bottles with a capacity of 500 – 1000 ml. Metal Closure Aluminium closures have been processed (MCA 28). Due to a change in production (purchase of a filler with a blocked capper) this machine has become redundant and can therefore be offered in absolutely new condition with less than 300 operating hours. Tech Specs: Capacity: 20,000 bph For glass bottles 500 – 1,000 ml 8 sealing heads Bottle/container diameter [mm] 55-93 Bottle/container height [mm] 120-360 Closure types MCA 28 + Talog Control Siemens SIMATIC S7-1200 Features: Incredible few operating hours, mint condition Integrated control cabinet with touch display Protective housing/emergency function according to Machinery Directive 2006/42/EC Suitable for MCA 2 ...

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM