alfa laval centrifugal used for sale

Tank without aseptic valve node 9000l

FOR SALE ALFA LAVAL PURIFIER PU 150 COMPLETE UNIT AT TURKEY HAVE A GDY SIR; WE VE COMPLETE USED ALFA LAVAL PU 150 PURIFIER UNIT PURIFIER WORKED IN VERY LESS HRS. TESTED IN WORKING CONDATION.. PU 150 PURIFIER UNIT SER NO. 107338/2009 YOB 2009 440V 60 Hz P 150 SEPARATOR SERIAL No. 4173737 440 V 60 HZ MOY 2008 MADE IN SWEEDEN SEPARTOR BOWL IN VERY GOOD CONDATION. SYSTEM READY TO USE. IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

ALFA-LAVAL LKH 80/245 FSS 75kW hygienic centrifugal pump. Capacity: 280 m³/hr, 5 bar. Electric motor: 75kW. comes from a TETRAPAK Alcross Bactocatch system. Built in 2008. in very good condition.

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE ALFA LAVAL MMB 305S-11 TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MMB 305S-11 SEPARATOR AT OUR STOCK IT IS IN GOOD RUNNING CONDAT?ON . IT WHAS USED AS GAS OIL SEPARATOR PLS FIND SPECIFICATION BELOW. MODEL MMB 305S-11 YOB & SERIAL No. 2008 / 4170832 BOWL NO. 548715-01 CURRENCY 60 Hz MADE IN SWEEDEN READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE HFO SEPARATOR ALFA LAVAL S 825 TO WHOM IT MAY CONCERN; WE VE USED HFO SEPARATOR ALFA LAVAL S 825 AT OUR STOCK. IT IS IN GOOD RUNNING CONDATION.. PLS FIND SPECIFACATION ON AT BELOW. TYPE S825 YEAR / SERIAL NO. 2004 / 4130905 BOWL NO. 560626-04 CURRENCY 60 Hz SEPARATOR READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Specifications: 1. Bowl Diameter (mm) 220 2. Bowl Length (mm) 880 3. Length Diameter Ratio 4. Bowl Shape Cylinder Cone 5. Rotation Rate of Bowl (r/min) 5000 6. Relative Centrifugal Force 3076 7. Scroll Conveyor Lined with tungsten carbide hard alloy Single end, Left cycle rotating 8. Main Motor (kW) 11 9. Back drive motor (kW) 5.5 10. Operation mode 24 hours/day 11. Overall Weight (kg) 100 Control Panel: 1. Standard control panel PLC controlled, 2. Basic System with 7” color touch screen – I/O modules Variable Frequency Drive for main and back drive 3. Bearing temperature sensors 4. Vibration Sensor Material of Construction: 1. Screw conveyor SS316L 2. Bowl SS316L 3. Gearbox 40CrMo 4. Bowl ribs SS316L 5. Machine base fine carbon steel (parts in contact with material are coated with SS316L) 6. Shell SS316L 7. Safety cover SS316L 8. Main b ...

Motor type: SK 160L/4 TF, Engine power: 50Hz 15kW 380V, Link to manufacturer: https://www.alfalaval.fr/, dn (mm): 77, Pump: Obe pump

FOR SALE NEW UNUSED 4 PCS ALFA LAVAL HEAT PAC EHM 40KW TO WHOM IT MAY CONCERN ; WE VE 4 PCS-NEW UNUSED ALFA LAVAL HEATPAC EHM 40KW AT OUR STOCK. HEATPAC IS 440V YOB 2013 PLS FIND SPECT AT PICTURES IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

For sale is a used base plate with accessories. For sale only within Europe. Price factory Travenhorst. Foundation plate No.: 543688 80, 3x Holder 528729 02, 9x Screw Tel: 0049 45569819444 ---------------------------------------------------------------------- ------------- Our company: For many years now, we have been supporting national and international companies as a recovery plant for separators. In our new plant, Alfa Laval and Tetra Pak separators / centrifuges are generally overhauled at the highest level for our customers and converted on request.Our centerpiece, the test bench, is constantly being expanded in order to reach the highest performance of the various machines permanently and reliably. As a result, our customers profit from the modernized separators in terms of availability and costs. Benefit from our experience - benefit from our services!

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

FOR SALE... FOR SALE ALFA LAVAL MIB 303S 13/33 YOB 2011 AT TURKEY TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MIB 303S 13/33 YOB 2011 AT STOCK READY TO SHIPMENT IF YOU INTEREST PLS LET ME KNOW Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY

1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.

ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

Te Koop: Alfa laval Tetra Pak Type CLIP 8-RH 1999 Bouwjaar Voor meer informatie kunt U bellen of mailen. Email: wh.derikx@gmail.com. Phone. +31 620758459 De nu kopen prijs is excl. 21% btw.

New Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

for the production of beer and soft drinks Capacity: 30,000 l/h

Used and overhauled Alfa Laval GTPX-517-TGV-15-CEFG-60 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), max bowl speed 4135 rpm, three phase separation design, centripetal pump liquid discharge, deep sludge design lower casing, direct drive configuration, mounted on sub-base, 37 kW drive motor 460/3/60

• Year: 2003 • Producer: ALFATEK • Speed (BPH): 1.000 bph • Direction: Clockwise • 6 clamps. • Safety protections. • Code UW 105

more information to follow

Separators Alfa Laval MMPX 304 and others from stock. As well as all spare parts and documentation for them. Year 2005

CNC Plasma cutting table It is in good condition, located in Riga 2018

ALFA LAVAL BRPX 214 SEPARATOR CENTIFUGE USED BEER, WINE, JUICES ALFA LAVAL BRPX 214 SEPARATOR CENTIFUGE USED MANUAL TOOLS Motor 18,5 kW Hydraulic capacity 30.000 l /h

Pump: Obe pump, dn (mm): 77 , Motor type: NORTH, Link to manufacturer: https://www.alfalaval.fr/

ALFA LAVAL Centrifuge Production: 15,000lts/h. The machine is located in Spain.

Manufacturer Alfa Laval Model: PAZ 630C Year of manufacture: 1974 Located in United Kingdom

Thermoformer / heat sealer for product packaging in trays For flexible plastic trays, flexible plastic closure Rebuilt in 2015 With mold for 180 x 125mm trays Includes vacuum pump, and refrigerator DOCUMENTATION AVAILABLE

Disc grinding mill, to break the fruit into small pieces and allow easy release of the oil. power 25hp

Wsk Kraków UVPX 207 Centrifuge / separator Centrifuge, a separator, centrifuge UVPX 207 UVPX 207 Wsk Kraków UVPX 207

Alfa Laval BRPX 214 Separator centifuge used Manual Tools Beer, wine, juices Used For review Hydraulic capacity 30.000 l /h

Alfa Laval BRPX 213 -35H-22 Motor 18,5 kW Hydraulic capacity 18.000 l/h

- net.weiht 641 kg - Liquid wolume 253 L - Design pressure 10 bar - Total area 91,9 m2 - material AISI 316 - sealing material EPDMF CLIP-ON

Alfa Laval BRPX 214 Separator centifuge used Manual Tools

De Laval, Alfa laval, separator centrifuge FL 118 EM De Laval FL 118 EM used

Alfa Laval BRPX 313 SFD-34C Separator Alfa Laval BRPX 313 SFD-34C tools control panel

Alfa Laval Alfa Laval UVPX 307 AGT 14 separator centrifuge oil fish , olives Alfa Laval UVPX 307 AGT 14

Alfa-laval plate cooler typ. M6-MWFDR

Alfa Laval WSPX 504 separator centrifuge Alfa Laval WSPX 504 tools year 2007

Alfa Laval VNPX 710 SGD34G-50 tools used year 1996 Application Continuous clarification of wine, sparkl. wine and wine must Throughput capacity Maximum hydraulic capacity 24 000 l/h Motor 22 kW standard motor for 380/660 V, 50 or 60 Hz 3-phase AC

Alfa Laval SRPX 614 HGV-74C separator Alfa Laval SRPX 614 HGV-74C Used used tools

Used Alfa Laval decanter centrifuge model Aldec 40. New: 2007. The set includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - centrifuge control cabinet - control cabinet of the compaction installation Technical parameters of the centrifuge: - maximum cake density 1.2 kg/dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - 2-stage planetary gear - gear max torque 2.5 kNm Gear ratio 1:159 - drum length 1460 mm - drum diameter 353 mm - cover/cover material AISI 316 - inner surface of the AISI 316 cover Centrifuge dismantled. All devices were technically efficient and in operation until dismantling.

Alfa-Laval M101-BWREF plate cooler

Filling machine ALFATEK 28 valves isobaric – 5.000 bph: Year: 2004 Producer: ALFATEK Speed (BPH): 5.000 bph Direction: Clockwise -RECONDITIONED MACHINE 1) Isobaric filler Alfatek 28 valves. 2) Complete of self levelling. Code T 10

Self-cleaning centrifuge Alva Laval VNPX 410 SGD 34 for: -Juice -wine -beer

Description load capacity: 150 kg minimum weight: 2.5 kg division: 50 gr weighing surface dimensions 750 x 870 mm

Description Oil thermoregulator Max Temperature: 150°C Heating Power: 3Kw Tank capacity: 5 L