alfa lava used for sale

Overview The filling line for returnable glass bottles is currently still in use in a mineral water bottling plant in Germany. The condition of the entire line is good, as it has been regularly maintained and continuously serviced. Over time, several machines from the original line have been replaced by newer ones. Furthermore, the complete crate and bottle inspection systems have been replaced during the last years. The plant has a straight design, which makes the line very well accessible and maintainable. Tech Specs Capacity: 30,000 bph at 0.7 L bottles Suitable: Carbonated water Beer, when adding vacuum pump and HPI (high pressure injection), second vacuum channel available recently overhauled, regularly maintained Formats processed: 0.75l GDB / 0.7l GDB in crate of 4x3 YOM: ranging from 1995 to 2020 The Line in Detail Pallet tape removal Manufacturer: BORNBINDER Model: PAE YOM: 2014 ...

Overview  The complete filling line for returnable glass is located at a brewery and was used for filling beer and lemonade. The line has been regularly serviced and is in very good condition. All machines are from 1995, except the unscrewing machine, which was built in 2005 and has a Siemens S7-300 installed.  Output: 10,000-12,000 bph at 0.5l  Formats: 0.5l Euro and 0.5l NRW  Closure: crown cap and screw cap Euro crate 4x5, modular crate 4x5, Euro pallet Slip ring rotor was recently replaced List of machines Decapper, 2 heads | Rink | KM740/2K | 2005  Unpacker, 2 heads | Joha | Opal 10 | 1995  Bottle washer | Krones | LAVAPUR KESK 168/16-80 | 1995  16 bottle cells In stainless steel Partially insulated  Bottle cell for 0.5 l maximum bottle size Finger feed Rotary tube spraying Heated with steam  Guide and housing at the rear recently completely renewed Lubrication points centr ...

Closed stainless steel butter silo. Single jacketed. The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of 4.0 kW - 380 V - 8,9 Amp). Total capacity: ± 3.000 kg. Manhole of 400 x 500 mm on one side and a sight glass on the same side. 3x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) / adding the pipe of a reworker on the other side and 1x at the back. CIP cleanable with 2x spraybowls in the top. Breather on top. Outfeed plate with 2x DN100 product connection on the outfeed of the silo. Renewed stainless steel control panel (2018, VSTechniek) with frequency converter, on/off switches and speed regulation control. Electric scheme available. Including 1x outfeed rotary lobe pump, Alfa Laval - LKM, type 2130A, serial number: 155891/01C, motor: 1,1 kW - 1455 / 39 rpm and 1x CIP return centrifugal pump, Hilge, HY ...

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

Description: TAURING ALFA 40 Bending Machine Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 1,700 mm, weight approx.: 250 kg

Lot Composed of various machinery for the processing of plastic and wooden components for eyewear. n.1 Ventilation System with extractor and filters: Used for the extraction of fumes generated by the combustion of PVC materials in ovens. n.1 Cielle CNC machine: Used for milling and cutting wooden components for glasses. Brand Cielle Model ALFA 61X6, Year 2011, S/N 24/11 WEIGHT 250kg VOLT 220/240 POWER 1800W n.1 Double action oven: Used for firing PVC material (Working temperatures up to about 300 degrees Celsius, 4 pieces. n.1 Green Box Chiller for closed-loop cooling of machinery. n.1 Press and Dehumidifier (5 pieces) : o Press: Used to cut labels that were then printed on the fabric. o Dehumidifier: Used to dehumidify TPU material into granules. o 1 Laser : Used for laser cutting organic material, also used for cutting fabric (textile). Can also be used for engraving. o n ...

SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

Stegher FD Dowel Drill Brand: Stegher Type: FD Year of construction: 1995 M-No.: 35/12951 Control: Alfa-numeric, with pre-programmed drill cartridges Longitudinal and strin-side bores Length stops: Left and right digital stops for longitudinal drilling Lugs for left and right side holes with turret positioning Dowel dimensions: 6-16 mm Drilling depth: 80 mm Motor: 2.2 KW Compressed air: 6 bar Suction: ø80 mm

Used complete powder plant existing out of evaporator (4-effect, TVR), high pressure pump, spray dryer, packaging line in 25 kg bags and palletising robot., Previously used for whole milk powder (WMP). Line was running an input of ± 280.000 liters whole milk per day and an output of ± 28.000 kg of WMP per day., Still mounted inside the factory., The main components of the line:, - Evaporator, 4-effect, TVR, Manufacturer: Tebel - Van der Ploeg, Type: Falling film evaporator, Stages: 4-effect, Compression: TVR, Year: 1975, Capacity input for whole milk: ± 13.000 liter per hour (± 11,2% TS), Capacity output for whole milk: ± 3.000 kg per hour (± 48% TS), Capacity input for skim milk: ± 14.500 liter per hour (± 8,8% TS), Capacity output for skim milk: 3.000 ± liter per hour (± 48% TS), Capacity input for whey: ± 16.500 liter per hour (± 6% TS), Capacity output for whey: ± 3.000  ...

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.1.

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Semi-automatic boring machine Brand: VITAP Typ: ALFA 35 T New machine Technical data: - One boring head 35 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreese and any intermediate angles) - Frontal/top 51aliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator - Stroke regulation by means of 6 positions revolver (turret) (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mm) - Speed regulation of the boring group command by control board - Strengthened steel structures for tilting of the boring group - 1 motor HP. 3 (Kw 2,2) - Sta ...

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...