al saw used for sale

bore capacity in steel (diameter): 40,0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 514 x 360 mm turning speeds: 160 - 2.250 U/min column diameter: 115 mm feed: 0,10 + 0,20 mm/U total power requirement: 1,45 / 1,9 kW weight: 285 kg range L-W-H: 0,5 x 0,8 x 1,84 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device B pos. 25. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron (diameter): 38 mm threading cutting capacity:: M20/M30 drive capacity - spindle motor: 1,9 kW spindle taper MT: 3 turning speed range: 160- 2250 U/min column diameter: 115 mm table surface area: 300 x 300 mm distance spindle /table: 642 mm distance spindle/base plate: 1207 mm dimensions: 0,7 x 0,45 x 1,85 m weight: 260 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used Pillar Drilling Machine in very good condition. - stepless spindle speed - spindle left/right - Manual tapping (manual change direction of rotation) - Manuel Depth gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AlWarp basic desktop labelling for bottles - great condition, hardly used. 2014 Model. This would suit anyone needing a solid and reliable desktop labeller. Altech are a UK company who provide full support. Depending on bottle size and the speed you run it, it can do around 600 bottles/hour (to give you a rough idea). It can be shown working.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 789 € : 22-76 mm : 3 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4280 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5680 € : 117.58 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

: neu : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3660 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm The  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6910 € : 143.04 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

Specifications: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping performance in ST 60: M24 Tapping capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feeds: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined foot with T-slots - Feed device - R- L- Barrel - Tapping device - Emergency stop push button -Chuck -Vice - Machine wedge shoes - Swivel machine table - Dice table - Base plate with T-slots - Machine lamp

General SKU205S017 LocationBarneveld MakeAlfa Laval (DK) TypeALDEC 504 No.5021477 Year of construction2001 Main Features MaterialStainless steel Motor45 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter140mm Screw length1460mm InletDia: 35mm Liquid outletDia: 130mm Solids outletDia: 129mm Motor45kW, 400/690Volt, 1480rpm Max. rotor speed3250 rpm MaterialStainless steel 1.4401 (316) Information Mounted on framecheck With switchgearcheck(as is) Floorspace3,6x1,15m Total height1,95m Weight2840kgDecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 30 , 10 , 5

We offer: - ALUP Allegro 31 screw compressor with integrated refrigerant dryer. - Power: 30 KW 10 bar / 5.33 m³ per minute. - Year of manufacture: 2015 / 26192 operating hours / last maintenance was at 25163 operating hours. - First commissioning 01/2016. - For other technical data, please refer to the picture of the type plate. - Device is in perfect condition is only sold because the great power is no longer needed !

SCREW COMPRESSOR ALUP ALLEGRO 30Kw INVERTER 14r ALUP ALLEGRO 30-10 screw compressor machine with inverter after service Specifications: capacity: 4.92 m3/min; 30KW motor; pressure max. 9.7bar; year; 2014 process; 8236h; compressor fully functional, warranty, net price: 24500 PLN gross price: 30135PLN

Size LxWxH 4749x1060x 1376 mm Weight 3200 kg Main drive size 11-45 kw Back drive size 5.5-15 kw

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete ...

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and pivoting saw blade with digital display., cutting height: 200 mm, cutting length: 3.000 mm, cutting width: 1.000 mm, saw blade ø: 550 mm, engine: 5,5 kW

The trimming saw or panel saw Altendorf type F45 is a circular saw with a sliding panel for sawing wood and similar materials with an electrically adjustable and swiveling saw blade, digital display and scorer. In addition, the machine has pneumatic hold-down devices for convenient one-person operation., cutting height: tba, cutting length: 3.200 mm, cutting width: 1.300 mm, saw blade ø: 450 mm, engine: 5,5 kW, Vorritzer: 0,75 kW

Construction circular saw, circular saw -Dimensions: 885/670/H810 mm -Weight: 42kg

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

ROLLER CONVEYOR FUR ALUMINUM SAW -Length 300 cm -Breedte rollenbaan 300 mm -Lengteaansla DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sawblade tiltable: 45 ° Length of the rolling table: 3.000 mm cutting width: 1.000 mm Motor output: 5,5 kW Cutting height: 165 mm Saw blade diameter: 500 mm Speed: 3.000 /4.000 5.000 U/min. weight of the machine ca.: 1.100 kg : Ja Number of working hours: ca. 30 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 3.800 mm cutting width: 1.300 mm Motor output: 5,5 kW Cutting height: ca. 170 mm Saw blade diameter: 500 mm Speed: 3/4/5000 U/min. weight of the machine ca.: ca. 1.000 kg : elektrisch : elektrisch : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

intake connection: 200mm; Maximum volume flow: 1770 m³/h; nominal volume flow: 2780 m³/h; Vacuum: 1580 pa; filter area: 13 m²; filter regeneration: pneumatisch; chip bag volume: ca. 380l; motor power: 3 kW; machine length: 2000 mm; machine width: 800 mm; machine height: 2200 mm; weight: 240 kg; The deduster is suitable for extracting dry wood dust and dry wood chips on individual dust sources. this is also valid for oak and beech wood dust. Furthermore, metallic, ceramic mixed, organic dusts of the dust ex plo sions class St1 and St2 be sucked off. If the dust extractor is properly handled by a woodworking machine with a dust source (eg circular saw, milling machine, planer machine, belt grinder) and locked in accordance with the rules operated, is the necessary extraction performance and separation quality always guaranteed. When extracting a dust-proofed woodworking m ...

Used aseptic filling line Bag in Box Alfa Laval up to 1400 bph Introduction to the System The Used aseptic filling line Bag in Box Astepo up to 1400 BPH marks a revolution in the food processing industry It s an epitome of engineering finesse designed specifically for ICE cream mix The system ensures an aseptic environment crucial for maintaining product integrity enhancing shelf life and ensuring consumer safety This filling line produces formats from 5 L up to 20 L Components and Technical Specifications At the heart of the system is the Astepo HS LA A F 1H 1 a marvel of modern manufacturing Accompanying the primary unit is a sophisticated conveyor system integral for the seamless transfer of products minimizing contamination risks and human intervention An automatic packer follows suit in the Used aseptic line exemplifying efficiency and consistency It ensures that each product meets  ...

Sawblade tiltable: 45 ° Length of the rolling table: 1.400 mm cutting width: 1.000 mm Motor output: 5,5 kW Cutting height: ca. 155 mm Saw blade diameter: 450 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca. 700 kg : Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

Suction nozzle diameter: 200mm; Nominal flow rate: 2780 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 1580 pa; Filter area: 13 m²; Filter cleaning: pneumatic; Motor power: 3 kW; Machine length: 2000 mm; Machine width: 800 mm; Machine height: 2200 mm; Weight: 240; The dust extractor is suitable for vacuuming dry wood dust and dry wood chips at individual dust sources. This also applies for oak and beech wood dust. Furthermore, metallic, ceramic, organic dusts of dust explosion class St1 and St2 can be extracted. If the dust extractor is properly connected to a woodworking machine with a dust source (e.g. circular saw, milling machine, planer, belt sander) and operated in accordance with the regulations", the necessary extraction performance and separation qualityâ is always guaranteed. When vacuuming a “dust-tested†woodworking  ...

Sawblade tiltable: 45 ° Length of the rolling table: 3.000 mm cutting width: 1.000 mm Motor output: 11 kW Cutting height: ca. 173 mm Saw blade diameter: 500 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca. 1.000 kg : Ja : Nein : Digital : Digital : Tip-Servo output: kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 2.800 mm cutting width: ca. 1.100 mm Motor output: 7,5 kW Cutting height: ca. 153 mm Saw blade diameter: 450 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca 1.000 kg : Ja : Ja : Hydraulisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 35364 With a combined circular table saw with a milling device and for slot drilling Table dimensions of the slot drilling device: 500 x 260 mm Table dimensions of the combined machine: 1000 x 820 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 1,100 x 1,400 mm, weight approx.: 500 kg

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

We can offer: Bundeling machine for packs of bags. Producer : Algewa/Switzerland Type: 965 AS Still in operation: No Available: Now

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Type: 100 FSG, built: 1986, gas operated granulating rig, spray granulator with two media nozzle, separator, heat exchanger (Manufacturer: Ohl), blowback filter K 6 R (2,4 m²), dosing unit for adding seeds. Mint condition.

Tank standing, Y.O.M.: 1985, D = 900 mm, 1.4 m high, three load cells, max. pressure: 6 bar, weight: approx. 500 kg

Built 1985, tank with weighing equipment in special steel, capactiy: 800 l, tank on 3 weighing cells, max. pressure: 6 bar.

75.0 kW, max. 10 bar, 10.40 m3/min.

Alfa Laval Oil Seperator MAB 205

Alfa Laval MMB 305 Skid

Alfa-Laval,New Plate Heat Exchanger Niro-Inox. Type A 15-BWFDR-1.730KW,with 189 plates,141m2, compact. Type MK 15-BWFDR 1.526KW,with 282 plates,128,8m2 Type MK 15-BWFDR,1.730KW,with 150 plates,68,1m2.

Double flat clip machine DKF 15/15 overhauled 2009 - see display category Packaging machines -

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Centrimax - Winkelhorst Trenntechnik GmbH is specified for over 30 years on the delivery by used separators of the brands Westfalia separator and Alfa Laval. The separators are fully reconditioned by us and are delivered with warranty. Disc stack separators (selfcleaning separators, solid wall separators and nozzle separators) as well as chamber separators, for the purification and the separation of suspension and liquid mixtures count to our big stock of several hundred separators. Ask us if you search consultation in the solution of problems in the area of the centrifugal dividing technology. Shop with the specialist!

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !

75,0 kW, max. 10,0 bar, 10,40 m3/min.