adam richter used for sale

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RMA-B 1,5x1x8 Class 150 impeller diameter: Ø 7,99 inch ( approx. 202.95 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm Engine: SIEMENS NEMA Premium Type SD 100 215 TC ( SD100215TC ) 7.5 H.p. ( 7.5 hp, approx. 5.52 kW ) 2930 rpm 200 / 400 V 3AC, 50 Hz approx. 15 m connection cable with cable protection conduit type LA, size 1/2 inch, 4-wire with plug ( HARTING ) used, tested ! overhauled ! Dimensions: 830 x 400 x 340 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump RICHTER CHEMIE-TECHNIK GmbH RM 1,5x1x8 Class 150 impeller diameter: Ø 8,0 inch ( approx. 203.2 mm ) Input: Ø 1.5 inch ( approx. 38.1 mm) DN40 Flange diameter: Ø 132 mm Output: Ø 1.0 inch ( approx. 25.4 mm ) DN25 Flange diameter: Ø 112 mm Motor: SIEMENS NEMA Premium Type SD 100 215 TC ( SD100215TC ) 7,46 kW 2930 rpm 200 / 400 V 3AC, 50 Hz New ! Dimensions: 830 x 430 x 330 mm

Containment shell for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 6/RMI160 Material number: 9418-35-1001 Material: SSIC/SG PLUS Pot diameter: Ø 167 mm Pot height: 125 mm Flange diameter: Ø 220 mm New ! Dimensions ( packaging ): 260 x 260 x 130 mm

Containment shell insert for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 6/RMI160 Material number: 9418-35-1051 Material: SSIC/SG PLUS Pot diameter: Ø 164 mm Pot height: 125 mm Flange diameter: Ø 220 mm New ! Dimensions ( packaging ): 230 x 230 x 130 mm

Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Containment shell insert for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1.5 x 1 x 8 Material number: 9418-35-1061 Material: SSIC/SG PLUS Pot diameter: Ø 164 mm Pot height: 125 mm Flange diameter: Ø 240 mm New dimensions ( packaging ): 250 x 250 x 130 mm

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

Impeller with pump rotor for magnetic coupling centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,5 x 1 x 6 impeller, closed: D175 Material number: 9427-93-1006 diameter: 175 mm, width: 20 mm pump rotor: 50 Nm Material number: 9427-93-3002 Bearing bushing diameter: Ø 45 mm Shaft bushing: Ø 24.5 mm New ! Dimensions: 175 x 175 x 127 mm

Impeller for magnetic clutch centrifugal pump RICHTER CHEMIE-TECHNIK GmbH RMA 1,,5 x 1 x 8 impeller, closed: D203 Material number: 9427-93-1011 diameter: 203 mm, width: 21.5 mm bearing bush diameter: Ø 45 mm shaft feedthrough: Ø 26.0 mm New ! Dimensions: 203 x 203 x 125 mm

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

Cellular rubber tape RICHTERS 50 x 8 mm Width: 50 mm Material thickness: 8 mm Number of rollers: 6 Roll length: 5 m Material: Cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 240 x 240 x 50 mm Dimensions ( packaging ): 255 x 255 x 310 mm

Working area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12100 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4 ...

Cellular rubber tape RICHTERS 25 x 5 mm width: 25 mm material thickness: 5 mm Number of rollers: 9 roll length: 10 m Material: cellular rubber, self-adhesive Other quantities on request ! New ! Dimensions ( single roll ): 260 x 260 x 25 mm Dimensions ( packaging ): 265 x 265 x 310 mm

Description: Tapping machine included: Machine base frame Footswitch vice different tools see pictures Thread diameter M5 - M10 mm Tool speed 320 - 1600 rpm Table size 330 x 290 mm Projection 215 mm Operating voltage 380 V Total power requirement 0.55 kW Machine weight approx. 300 kg Space requirement approx. 1.2 x 0.8 x 2.0 m Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 300 kg

thread dia.: M5 - M10 mm Tools speed: 320 - 1600 U/min table-size: 330 x 290 mm throat: 215 mm voltage: 380 V threading length: mm total power requirement: 0,55 kW weight of the machine ca.: 300 Kg dimensions of the machine ca.: 1,2 x 0,8 x 2,0 m Tapping machine including: machine base footswitch vice different tools see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.16800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor Motor ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine WheelNumber of tools 15TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minGeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Working area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbsSpindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14,5 ...

pressure:160 t distance between columns:2050/1900 mm stroke:15 - 170 mm no. of strokes:15 - 40 /min distance table/ram, max. stroke up, adjustment up:690 mm table surface area:1600 x 800 mm side window:800 mm ram surface:1620 x 700 mm ram adjustment:140 mm power requirement:15,0 kW weight:24,0 t Dimensions (WxDxH):3,3 x 2,3 x 5,3 m height over floor:4,8 m height beneath floor:0,5 m clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...