We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.
used
90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.
used
90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.
used
75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.
used
45.0 kW, max. 7.50 bar, 6.06 m3/min. oil-free, air-cooled.
used
45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.
used
160 kW, max. 7.50 bar, 30.30 m3/min. With built-in compressed air dryer.
used
160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.
used
315 kW, max. 10.0 bar, 41.20 m3/min. oil-free, water-free. Voltage 3300V, 3ph, 50 Hz. New control electronics Mk4.
used
315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.
used
90.0 kW, max. 9.0 bar, 14.39 m3/min. In very good condition.
used
160.0 kW, max. 7.50 bar, 22.70 m3/min. oil-free, air-cooled
used
160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled
used
132 kW, max. 10 bar, 18.3 m3/min. oil-free, water-covered
used
132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled
used
400 kW, max. 8 bar, 61.32 m3/min. oil-free, water-free. Screw elements have 16000 working hours.
used
400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.
used
160 kW, max. 7.5 bar, 26.88 m3/min.
used
160 kW, max. 7,5 bar, 26,88 m3/min.
used
75 kW, max. 8.60 bar, 11.20 m3/min. oil-free, air-cooled.
used
75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.
used
110,0 kW, max. 3,50 bar, 23,22 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.
used
132.0 kW, max. 3.50 bar, 24.30 m3/min. oil-free, water-free. Compressor element (screw) has 18000 operating hours.
used
132,0 kW, max. 3,50 bar, 24,30 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.
used
132.0 kW, max. 2.35 bar, 34.62 m3/min. oil-free, air-cooled.
used
132,0 kW, max. 2,20 bar, 43,02 m3/min. Oil-free, air cooled. 2 pieces available.
used
200.0 kW, max. 8.60 bar, 30.72 m3/min. oil-free, water-free. Compressor elements (screws) have 16000 hours. New control Electronicon Mk4.
used
200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.
used
Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810
used
max. 10.50 bar, 99.80 m3/min, caelte agent R 404a, water-covered.
used
max. 10,50 bar, 99,80 m3/min, Refrigerant R 404a, water cooled.
used
160 kW, max. 7.5 bar, 27.80 m3/min oel-free, water-covered. Elements have 32000 operating hours.
used
160 kW, max. 7,5 bar, 27,80 m3/min oil-free, water cooled. Air ends have 32000 working hours.
used
250 kW, max. 10 bar, 37.60 m3/min, oil-free, water-covered.
used
250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.
used
250 kW, max. 10.50 bar, 34.86 m3/min. oil-free. Low and high pressure elements are now Mk2 outing and have 13000 operating hours.
used
250 kW, max. 10.50 bar, 34,86 m3/min. Oil-free. LP and HP air ends are new Mk2 version and have 13000 working hours.
used
90 kW, max. 8.35 bar, 13.20 m3/min. Oil-free, water-free, with built-in adsorption dryer IMD 260. Excellent condition.
used
90 kW, max. 8,35 bar, 13,20 m3/min. Oil-free, water cooled, with built-in adsorption dryer IMD 260. Excellent condition.
used
Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...
used
Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.
Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.
used
Material: Steel Engine: 37 kW Weight: 1,700 kg diameters: 10-60 (mikron) task: kg/h 1200-5000 Speed: max. min 1 2250 This machine is overhauled and like new. You can also get the entire system with all components.
used
Air Screw Compressor Atlas Copco GA 55 VSD 55 kW, max. 13 bar, 9.72 m3/min. With built-in frequency inverter. Volume flow 1.6 - 9.72 m3 rpm.
used
55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.
used
The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for ...
used
The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up ...
used
200.0 kW, max. 8.60 bar, 30.72 m3/min. oil-free, water-free. Compressor elements (screws) have 16000 hours. New control Electronicon Mk4.
used
450.0 kW, max. 7.5 bar, 68.64 m3/min. oil-free. Water-ceded. With gentle start. New engine in 2009. Service reports available.
used
450,0 kW, max. 7,5 bar, 68,64 m3/min. Oil-free, water cooled, with soft start, new motor in 2009, service records available.