a 2145 used for sale

160 kW, max. 7,5 bar, 26,88 m3/min.

75 kW, max. 8.60 bar, 11.20 m3/min. oil-free, air-cooled.

75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.

110,0 kW, max. 3,50 bar, 23,22 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132.0 kW, max. 3.50 bar, 24.30 m3/min. oil-free, water-free. Compressor element (screw) has 18000 operating hours.

132,0 kW, max. 3,50 bar, 24,30 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132.0 kW, max. 2.35 bar, 34.62 m3/min. oil-free, air-cooled.

132,0 kW, max. 2,20 bar, 43,02 m3/min. Oil-free, air cooled. 2 pieces available.

200.0 kW, max. 8.60 bar, 30.72 m3/min. oil-free, water-free. Compressor elements (screws) have 16000 hours. New control Electronicon Mk4.

200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

max. 10.50 bar, 99.80 m3/min, caelte agent R 404a, water-covered.

max. 10,50 bar, 99,80 m3/min, Refrigerant R 404a, water cooled.

160 kW, max. 7.5 bar, 27.80 m3/min oel-free, water-covered. Elements have 32000 operating hours.

160 kW, max. 7,5 bar, 27,80 m3/min oil-free, water cooled. Air ends have 32000 working hours.

250 kW, max. 10 bar, 37.60 m3/min, oil-free, water-covered.

250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.

250 kW, max. 10.50 bar, 34.86 m3/min. oil-free. Low and high pressure elements are now Mk2 outing and have 13000 operating hours.

250 kW, max. 10.50 bar, 34,86 m3/min. Oil-free. LP and HP air ends are new Mk2 version and have 13000 working hours.

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

90 kW, max. 8.35 bar, 13.20 m3/min. Oil-free, water-free, with built-in adsorption dryer IMD 260. Excellent condition.

90 kW, max. 8,35 bar, 13,20 m3/min. Oil-free, water cooled, with built-in adsorption dryer IMD 260. Excellent condition.

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Material: Steel Engine: 37 kW Weight: 1,700 kg diameters: 10-60 (mikron) task: kg/h 1200-5000 Speed: max. min 1 2250 This machine is overhauled and like new. You can also get the entire system with all components.

Air Screw Compressor Atlas Copco GA 55 VSD 55 kW, max. 13 bar, 9.72 m3/min. With built-in frequency inverter. Volume flow 1.6 - 9.72 m3 rpm.

55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.

200.0 kW, max. 8.60 bar, 30.72 m3/min. oil-free, water-free. Compressor elements (screws) have 16000 hours. New control Electronicon Mk4.

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

450.0 kW, max. 7.5 bar, 68.64 m3/min. oil-free. Water-ceded. With gentle start. New engine in 2009. Service reports available.

450,0 kW, max. 7,5 bar, 68,64 m3/min. Oil-free, water cooled, with soft start, new motor in 2009, service records available.

50.0 kW, max. 7.61 bar, 8.60 m3/min. oil-free. Air-cooled. Frequency controlled. Volume flow 2.6 - 7.6 m3 rpm.

50,0 kW, max. 7,61 bar, 8,60 m3/min. Oil-free. Air cooled. Variable speed drive. Volume flow 2,6 - 7,6 m3/min.

Compressed air screw compressor oil-free Atlas Copco ZR 110 110 kW, 7.5 bar, 18.6 m3 rpm

Rotary screw air compressor Atlas Copco ZR 110 oil-free 110 kW, 7,5 bar, 18,6 m3/min.

Air Screw Compressor Atlas Copco GA 315 VSD FF 290 kW, 9.95 bar, 50.50 m3/min. Frequency controlled with integrated compressed air refrigeration dryer Volume flow 12.4 - 50.5 m3/min. at 7 bar

Rotary screw air compressor Atlas Copco GA 315 VSD FF 290kW, 9,95 bar, 50,50 m3/min. Variable speed drive. With built-in compressed air refrigerant dryer. Volume flow 12,4 - 50,5 m3/min. at 7 bar

Air Screw Compressor Atlas Copco GA 200 FF 200 kW, 7.25 bar, 36.10 m3/min with integrated compressed air refrigeration dryer

Rotary screw air compressor Atlas Copco GA 200 FF 200 kw, 7,25 bar, 36,10 m3/min. with built-in compressed air refrigerant dryer

Air screw compressor Atlas Copco ZR 450, oil-free 450 kW, 7.5 bar, 75.30 m3/min water-cooled

Rotary screw air compressor Atlas Copco ZR 450, oil-free 7,5 bar, 75,30 m3/min water cooled

Compressed air screw compressor oil-free Atlas Copco ZT 90 90 kW, 7.5 bar, 14 m3/min.

Rotary screw air compressor Atlas Copco ZT 90 oil-free 90 kW, 7,5 bar, 14 m3/min.

Compressed air refrigeration dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Frequency controlled, volume flow 0-60 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.

Compressed air refrigeration dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Frequency controlled, volume flow 0-75 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.

Compressed air screw compressor, Atlas Copco, GR 1520 200 kW, 20 bar, 19.60 m3/min. including external air cooler

Rotary screw air compressor Atlas Copco 200 kw, 20 bar, 19,60 m3/min. inclusive external air cooler