used Rotating Benches for sale

turning diameter over bed: 460 mmturning diameter over slide rest: 270 mmturning length: 1000 mmturning diameter: 460 mmswing diameter over bed slide: 270 mmturning dia. in gap: 730 mmspindle bore: 76 mmtotal power requirement: 11 kWweight of the machine ca.: 2425 kgdimensions of the machine ca.: 2,54x1,1x1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling pump for SN 71 C Trens lathe

Condition: Very good condition

Top height: 200mm Weight: 1400kg Speed series: 22.4-1000 rpm 4kW three-phase motor Colour: green according to RAL 6011 Accessories: - Multifix steel bracket - Three-jaw lining -Etc. All accessories of the lathe are included at no extra charge. Invoices and operating instructions are available and will be handed over at the time of sale. The machine should be inspected on site, which is why a detailed description is not required. On request, more pictures of the lathe can be sent. The machine was still in use until six months ago.

faceplate diameter: 1400 mmturning diameter over slide rest: 1400 mmcentre distance: 1500 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Manafacture: MICM Type: SNA170X2000 Case size: 4000 x 1700 x 1800 mm The turning diameter above the bed is 710 mm Distance between centers 2000 mm Spindle bore 82 mm Spindle speed 8-1250 rpm

centre height: 102 mmDistance between centres: 450 mmturning dia. over face-slide: 120 mmturning diameter over bed: 200 mmspindle taper:: W20 spindle bore: 22 mmnumber of spindle speeds: 18 from/to: 45-2500 U/mintailstock quill taper MT: 2 diameter of quill: 30 mmquill stroke: 110 mmdimensions of the machine ca.: 1500x800x1400 mmxmmxmmweight: 380 kgaccessories and equipment:: 3-jaw-chuck diameter: 100 mmquick change tool holder:: make: MULTIFIX boring chuck: 1 misc. accessories: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3150 mmturning diameter over slide rest: 2650 mmturning length: 15000 mmControl: Siemens 840 D total power requirement: kWweight of the machine ca.: 86 tdimensions of the machine ca.: 16 x 6 x 9,3 mThe machine is in dismantled condition, provisionally assembled,but not under power.Machine loaction in East Germany.Price plus costs for dismantling and loading.CNC control Siemens 840DTurning diameter over bed guide ways: 3150 mmTurning diameter over the bed slide: 2650 mmSpindle speed: 4 ranges - from 0.25 to 100 rpm.Maximum turning length: 15000 mmMax. workpiece weight 160 tonsMachine accessories:8 steady rest2 roles supportedMachine weight: approx. 86 tonSpace requirement (L x W x H): approx. 16 x 6 x 9.3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 120 mm, 60 mm, 1000 mm

Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately.

turning diameter over bed: 280 mmturning diameter over slide rest: 155 mmturning diameter in the gap: 350 mmturning length: 800 mmturning speeds: 26 - 2000 U/minspindle bore: 24 mmconnected load: 1,6 kWweight of the machine ca.: 0,7 tdimensions: 1,55 x 0,8 x 1,3 mCenter lathe with- digital display- 4-jaw chuck Röhm 250mm- Multifix steel holder- follow along. Bezel- steady rest max. 135mm- Chip protection wall- Chip tray- coolant system- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler Nachlathe (could be a hamlet FDU260) Converted with speed switching for thread cutting incl. hand lever cross support

Key data: 220 mm, 340 mm, 1500 mm

Lathe with removable bed

Key data: 220 mm, 340 mm, 1500 mm

With removable bed

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/minHead lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition andcan be inspected at any time under power.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 240 mm, 1500 mm

ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg