1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 1300
item-No.: 126885142
2007
used machinery auction RESALE 25.000 €
-
5-axis CNC machining center; spindle type HF 100; changing table; processing dimension each table 1.200 x 1.000 x 600 mm; travel absolutely 1.500 x 2.500 x 900 mm; weight 6.200 kg; Control NUM 1050; tool change system 12-fold plate magazine; milling spindle 4,5 kW; spindle speed 6.000 - 58.000 rpm; tool holder HSK 32 E; 2x vacuum pump; cooling unit; protective housing
Category: 104
item-No.: 126880136
max. dia. of grinding wheel: 175 mm turning speeds: 2825 U/min height adjustment: 150 mm tool taper: TRUMPF feed motion increment: 0,02 mm working area: 400 x 150 mm work height max.: 1100 mm engine output: 2,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 800 x 520 x 1300 mm Equipped with Trumpf tool holders as good as new with traces of storage, was used only for testing This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 308
item-No.: 126885116
2007
used machinery auction RESALE 5.000 €
-
Turntable system 6-fold; consisting of 6 pneumatically controlled gluing stations; clamping area approx. 700 x 660 mm; control Siemens S7-300; vacuum pump
Category: 201
item-No.: 126880020
serial number: VIN A585 Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 8900 x 1500 x 1800 mm main motor: 6,5 kW Description: SALVADOR Super Push 200 Saw Saw diameter 500 mm, Saw hole diameter 35 mm, Max. rev speed 2880 r./min, Power supply 3~400V, 50 Hz, Machine installed power 6,5 kW
Category: 101
item-No.: 126885110
5-axis CNC machining center; travel x = 4.140 mm; y = 1.540 mm; z = 1.000 mm; b = +/- 135 °; c = +/- 360 °; spindle speed 3.200 - 60.000 rpm; tool holder HSK 32 form f; chip conveyor belt under machine table; 2 workspaces; tool changer; control Siemens Sinumerik 840 D solution line; infrared probe Renishaw; vacuum pump; suction power 160m³ / h; accumulator; volume 250 liters
Category: 107
item-No.: 126880047
2005
used machinery auction RESALE 6.650 €
Land-de DE
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 1150 x 800 x 1400 mm Description: GSW RMA 40/74 Straightening Machine. machine no.: 1144, passage width 400 mm, strip thickness 0,4 up to 2,3 mm, strip thickness with fully width 2,5 mm, cross section max. 400 x 1,9 mm, 7 straightening rollers hard-chrome plated, distance between straightening rollers 60 mm, 2 pull-out rollers, roller diameter 40 mm, speed 5 up to 30 m/min, passage height over floor approx. 1200 mm, noise level 70 db(A), drive power 1,5 kW, ele ...
Category: 705
item-No.: 126885096
2011
8.750 GBP
Land-uk UK
Mettler-Toledo Garvens XS2 high speed checkweigher for continuous weighing and sorting. Capacity 0–400g. Operation from left to right with maximum through-put up to 65 weighings/minute for bottled liquids up to 120mm diameter. The electro-magnetic force weighing system is digital, temperature stable and is maintenance-free. The air reject station on the operator side operates at 4.8bar typically with air consumption at approx. 50 Ltrs/hour. All stainless steel construction with anodised aluminium conveyor parts a ...
Category: 107
item-No.: 126880057
1973
used machinery auction RESALE 950 €
Land-de DE
Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 1400 x 1000 x 1800 mm Description: Section Shear Round steel 35 mm Square steel 32 mm Angle steel 80 x 9 mm Hole diameter in sheet thickness 20 in 13 mm Punching machine: printing capacity 35 t Punch: projection 320 mm Punching punch: gr. Stroke length 24 mm Punch: Capacity (dr.x thickness) 25 x 11 mm Punch: Capacity (dr.x thickness) 20 x 13 mm Total power requirement 1.5 kW Machine weight approx. 1.8 t Space required approx. 1.4 x 1.0 x 1.8 m
Category: 108
item-No.: 126885087
-
700 €
-
Technical data: -Manufacturer: Knife -(see photo) -with cooling device High current 16A Weight approx. 200 kg
Category: 101
item-No.: 126880080
-
used machinery auction RESALE 5.500 €
Land-de DE
Weight approx.: 8000 kg Dimensions (l x w x h) approx.: 3700 x 2900 x 2900 mm Description: Useable work surface: 1400 x 650 mm, max workpiece-weight 1400kg, duty stroke x/y/z 1250 / 600 / 550 mm, for ISO 40 tool holder, Motoroutput (max) 15kw, 40-8000 rpm, turret: 21 places, tool changing time ca 6 sec, toolweight max 6 kg, control GE Fanuc Series 18-M. With 2 workshop drawer cabinets with content, 7 drawers each cabinet. Content: Clamping devices, milling tools , Thread cutting devices, bolts, three-jaw chuck, tur ...
Category: 705
item-No.: 126885071
Ackley high-output flat bed offset printer for single-side printing of tablets and capsules, capacity up to 290,000 per hour.
Category: 107
item-No.: 126879916
2006
used machinery auction RESALE 22.500 €
Land-ch CH
Weight approx.: 15500 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: Laser cutting machine was rebuilt and revised in 2013, operating hours according to report from 16 June 2017 approx. 15025h, cutting hours 6291h, travel paths/ cutting ranges X= 1562mm, Y= 772mm, Z= 100mm, max. plate size 752x1542mm, load capacities infeed table= 300 kg, cutting table= 80 kg, position deviation PA= +/-0,1mm, position scattering range = +/- 0,05mm, position speed (X+Y) = 100m/min, max. laser capacity 2200W, material t ...
Category: 1403
item-No.: 126885051
2009
6.750 €
-
2 piece roll out shelf, double-sided, Bartels - used-: Price per shelf from site: â?¬7.500.-(net), dismantled and loaded! Price at time of purchase of both systems: â?¬13.500.-(net) - both systems together are primarily sold! Manufacturer: Bartels Type: RAR 126.052. x 85 (type 1), double-sided, or RAR 126.052 (type2) Year of manufacture: 2009 Type 1: Support frame: maximum load on each side: 6,000 kg Support arm: Max payload than surface load: 1200 kg Floor: maximum load in 2 f ...
Category: 107
item-No.: 126879935
-
used machinery auction RESALE 250 €
Land-it IT
Weight approx.: 500 kg Dimensions (l x w x h) approx.: 900 x 1300 x 1500 mm Description: See photo
Category: 106
item-No.: 126885046
Print 75 t Number of stroke 120-600 stroke/min Thickness 10-300 mm Table size 1050 x 820 mm Plunger clamping surface 960 x 820 mm Distance from table - UK plunger 380 mm Piston stroke of adjustable 80 mm Feed length 0-150 mm Total power 20 kW Machine weight approx. 13 t -Feed unit with maximum speed 70 m / min -The keeping of Stossels using strong dimensioned Rundfuhrungen. -Crankshaft 4 stored -2 connecting rod -Central lubrication system modernized in 2009 -incl. magnetic tape conveyors
Category: 102
item-No.: 126879089
turning diameter over bed:850 mm turning diameter over slide rest:510 mm turning length:3000 mm with powered upper support: travel of cross-slide cross:600 mm movement of the upper support:250 mm bed width:600 (Monoblock) mm spindle bore:100 mm spindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/min metric threading:56,1~120 mm feeds - longitudinal:0,08~9,6 mm/min feeds - cross:0.04~4,8 mm/min rapid traverse longitudinal and cross:3640/1800 mm/min tailstock quill diameter:120 mm ...
Category: 1001
item-No.: 126885034
one used cooking cold rolling line for the automatic production of reducing and profiling meshwire for 5 ton spulen wire range: inlet slide 5.5-13.0 mm, finished wire 4.5-12.0 mm max production speed: 8 m/s
Category: 702
item-No.: 126876681
continuous-spraying, moveable,\r\nworking width 900 mm, free gap 280 mm,\r\ncap. approx. 8-10 plates /Min.\r\nequipment: input table, continuous - spraying, \r\noutfeed table
Category: 109
item-No.: 126885018
cleaning machine for eco-friendly cleaning and degreasing of metall, plastics, glases etc. - loading basket 8-squared: 1.400mmx1.400mm - loading height max.: 800mm - loading weight max.: 1.000kg equipment: - combined using of spray jet and heated cleaning liqour for highly cleaning capacity - front charging Piq7rfrh - stainless steel pump - stainless steel tank, stained and passivated - stainless steel heater - isolated cabinet and door - isolated tank - dry run protection for pump and heater - el ...
Category: 702
item-No.: 126876685
type JB 260, working width 256 mm, \r\n2 speeds, cap. max. 50 + 42 strokes/min.\r\naccessories: wire cut (1 design), 4 rows,\r\ninput by a chain for plates 256 x 625 mm
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: