pu used for sale

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H

Centrifugal pump, water pump -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 2 x pump available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Milton roy - Pompe doseuse D?bit max : 1321 L/H Pression Max : 15 bars Ann?e : 2011 Poids : 190 Kg.

MAN 32.322 chassis, year of construction 1993, 242,000 km, pump Putzmeister 17.50 m with radio remote control, good condition

General SKUR0951 LocationBarneveld MakeKPA Kyffhauser Pumpen Artern (D) TypeKN 35/2C Mach.No.12422-1 Main Features MaterialStainless steel Volume8000 Ltr. Motor2.2 KW Specified Features - Centrifugal Pump Pumpcheck Capacity8 m3/h @ 20 M With motor2,2 kW 400/230 Volt Inletdia. 40mm Outletdia. 40mm Centrifugal Pumps MaterialStainless steel 1.4404 (316L) Information Year of construction2012 Floorspace0,6x0,3 M Total height0,3 M Weight30 Kg Extra SpecificationsCECentrifugal PumpsKPA Kyffhäuser Pumpen Artern GmbHPumps > Centrifugal PumpsBrand > KPA Kyffhäuser Pumpen Artern GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU064Y422 LocationBarneveld Main Features MaterialStainless steel Motor18.5 KW Specified Features - Rotary Lobe Pump MaterialStainless steel Rotary Lobe Pumps Capacityunknown With motor18,5 KW, 220/380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace2,1x1,4 M Total height1,8 MRotary Lobe PumpsAlbin PumpPumps > Rotary Lobe PumpsBrand > Albin Pump What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description: ATTENTION: already dismantled  , Serial number 45000-10 Technical specifications: - maximum sheet surface: 1250 X 2500 mm - X axis stroke: 2591 mm - Y axis stroke: 1422 mm - maximum tool diameter: 76 mm - maximum sheet thickness: 6 mm - maximum weight of a board: 150 kg - maximum speed on the X axis: 94996 mm/min - maximum speed on the Y axis: 80010 mm/min - nominal voltage 380 V, 50 Hz - rated current 61 A - drive motor 7.5 kW - X-axes 3.1 kW - Y-axes 5.0 kW - T-axes 3.1 kW - control voltage 110 V 24 V DC - included: 5-6 tool holders and the machine manual weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 1,800 mm

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...

Cat pump, model 70

Komplete pump on steel frame. Volute casing pump KBO Vogel LSNI 80-50-160

Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!

Vacuum pump Magnetic suspended compound nuclear pump Manufacturer: Osaka Type: TG 2003M Pumping speed: 200 l/s

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

Material: Regular steel Driving force: 18,5 kW Empty weight: Approx. 300 kg Dimensions: L 2000 mm x W 550 mm x H 1000 mm Speed: 261 1/min Condition: Used Technical documentation: No Message: Delivery pressure is 2 bar

Power rotor diameter: 25mm, Design generation : 3, RPM : 3600 max, Max. inlet.: 7 bar, Power: 0.3-1.1 Flow: 10-30.4 L/min, Max. Discharge pressure: 16 bar BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Ibex Pump Model: SR/4 Serial: 930590/01 Stainless lobe pump on frame, 50mm inlet and outlet pipe, 3Kw motor, 3Ph

Busch Vacuum Pump Type NS0600B DZ sporadically used Built: 2016

Storage number: 3572 Various Manufacturer: GRUNDFOS PUMP , Type: CRK 4-100/10 A-W-A-AUUV Specifications: Rated Flow 66.7 l/min Stages impellers 12 pc Volt 380 v Depth of the pump 385 mm Engine Power 2.2 Max Print 8 Bar Weight: 29.6 kg

CL20 gear pump manufactured by TALLERES PUJOL.

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

DRYER JPS/100, of the year 2014 (Equipamientos J. Puchades - machinery for plastics).

IMO pump oil, for engine 28/32 Prt number: 623849

This Pullmax 4000 Punching machine was manufactured in the year 2001 in Sweden. The machine goes with a wide range of tools and computer software. The machine at the moment is not under power. Contact us anytime for further questions.

Max. grain size: 32mm, max. delivery pressure: 75bar, max. rotational speed: 1500/min, max. hydraulic pressure: 300bar, connected load: 45kW, weight: 2.5t, operational hours counter: 2990h, with single-axle chassis, four support legs and cable remote control.

Manufacturer: PCM Moineau Model: 13IVA10 Year: 2019 Type: Progressive cavity pump Transfer of viscous, heterogeneous and pasty products. Motor power : 4 KW Nominal flow rate : 2 m3/h Max pressure : 10 bars Nominal pressure : 5 bars Speed : 240 rpm Suction hopper Feeding screw

Plate edge slanting machine for welding type: X8-37´5 max plate thickness: 50 mm angle of bevel: 37,5 ° dimensions: 800 x 600 x 1400 mm Laskant- freesmachine -- Machine à fraiser des bord à souder -- Groove face milling machine -- Schweisskante fräsemaschine Groove Cap L x B x H: 25 mm Total weight: 480 kg

Manufacturer: Netzsch Model: NL 40A Year : 1985 Type : Progressive cavity pump / Eccentric screw pump Power : 1,1 KW Capacity : approx. 2 m3 / h For liquid and semi-liquid products with or without solids.

Manufacturer: PCM Moineau Model: MR6H12 Year: - Type : Progressive cavity pump Motor power : 0,75 KW Nominal flow rate : 1.2 m3/h Pressure : 8 bars

Manufacturer: PCM Moineau Model: MR2.6L10 Year: - Type : Progressive cavity pump Motor power : 0,55 KW Nominal flow rate : 0,75 m3/h Pressure : 5 bars

Centrifugal pump, water pump, immersion pump -Delivery rate: 2 l/min -Motor power: 0.18 kW -Connection: 220-290/380-500 V -Speed: 2700 rpm -Tropicalized: IP 44 -Dimensions: 190/131/H247 mm -Weight: 5.4 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -max: delivery rate: 14.3 m³/h -Nominal pressure: PN16, DN25 -Max. Temperature: 40 °C -Dimensions: 290/295/H535 mm -Weight: 30.5 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm -Max. Delivery rate: 23.6 m³/h -Max. Pressure: bar -Max. Temperature: 100 °C -Number: 1x pumps available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Universal Punching machine GEKA PUMA 50/E-750 Punching capacity: 50 T Table size: 1000 x 500 mm with length stop Drilling Capacity: Ø 27 x 13 mm Max punching in round: Ø 70 x thick 5 mm / Ø 100 x thick 3,5 mm Max punching in square: 50 x thick 5,5 mm / 60 x 4,5 mm / 70 x 4 mm Max punching in rectangle: 90 x 25 x thick 5 mm Year of construction: 1991 Throat depth: 750 mm Delivered with a set of punches Voltage: 380 V Dimensions (L x W x H): 2000 x 1300 x 2000 mm Weight: approx 2,2 T

ID2872 Putzmeister BSA1409 D5 year/Year of construction 2020 approx. 200 hours/hours Trailer concrete pump Diesel, ready for use Trailer Concrete Pump Diesel, Ready for Use

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

Pump controller for centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Pentair Jung Pumpen, alarm device with ball immersion switch, unused in original packaging -Type: Alarm device AG10 JP44892 -Ball immersion switch: KT JP 46208 -Quantity: 2x alarm devices available -Price per piece -Dimensions of box: 270/250/H140 mm -Weight: 2.0 kg/pc.

S/s head puller, dimensions: 1120 mm x 1000 mm x 1810 mm.

Mobile pump, dimensions: 1900 mm x 450 mm x 1000 mm.

Vertical manual panel saw Brand: Putsch Type: SVP 133 New machine standard features: - electric driven, automatic shift gate - swivelling centre support for small workpieces (length approx. 3,900 mm) - 4 vertical fixed sawing positions horizontal cuts - 1 measuring stop for vertical cuts - retractable transport wheels - self breaking engine - Preparation for connection to separate extraction system - TRK extraction system (BG wood dust tested) - 400V/3/50Hz - safety devices, sound insulation, tool set for saw blade change - operating instructions and spare parts catalogue technical data: - max. cutting length: 3200 mm - Max. vertical cut : 3200 mm (3100 with digit. dimension display for vertical cuts). - max. cutting height: 1900 mm - highest horizontal cut: 1700 mm - max. cutting depth: 60 mm - engine power: 5 hp (3.7 kW) - saw blade Ø: 250 mm - speed saw ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: PRT-R1113D, Type: Purete, Year: neu, Control: Siemens, Program: HMI, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts, Working height: 880, Vorschub Transport m/min min - max: 5 - 25, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5 - 25, Gummierte Auftragswalze(n): EPDM 40 shore, Dosierwalzenschwindigkeit m/min min-max: 5 - 25, Gummierung mm: 13, Gummierung mm: 13, Durchmesser Auftragswalze mm: 245, Simple rubber coating: yes, Dosierwalze verchromt: yes, Dosierwalzen Gleich und : yes, Dosierwalzenschwindigkeit m/min min-max: 5 - 25, kW - Leistung Dosierwalze: 0,75, Durchmesser Dosierwalze mm: 180, Steuerung Nicht-Ex : yes, Widht of roller coater: 1.450, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Separ ...

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -3 pole -Distributor: 4-way -Weight: 0.1 kg

General SKU364S880 LocationBarneveld MakePUC Probst & Class GmbH (D) TypePUC-Vikosator JV 10 No.64308 Year of constructionunknown Main Features MaterialMild steel Motor5.5 KW Inlet diameter60 mm Specified Features - Colloid mill MaterialMild steel Colloid millcheck Rotor sizesdia. 100x60mm Teethed rotorcheck With hoppercheck Inletdia. 60mm Outlet90x45mm Motor5.5 kW 380 Volt Information Mounted on wheelscheck With switchcheck Floorspace0,6x0,5 M Total height1,0 M Weight140 KgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

turning diameter: 850 mm turning length: 1280 mm control: FANUC i SERIES bar capacity: 102 mm x-axis: 293 mm z-axis: 1280 mm turning speeds: 2800 U/min Torque: 6605 Nm tailstock quill diameter: 100 mm Spindle power: 22 kw Diametre over slide: 670 mm size of pallet: 12,5 zoll total power requirement: 42,04 kW weight of the machine ca.: 7350 kg dimensions of the machine ca.: 4.530×2.105×2.020 mm - Main spindle - Max spindle speed 2.800 rpm - Speed ranges 2 - Main spindle power 22 kW - Main spindle torque 6.605 Nm - Spidle nose A2 – 11 Turret - No of tool stations 10 - Turret tool size 25 x 25 mm - Max boring bar size 50 mm. - Indexing Time 0,15 s - Tailstock Quill diameter 100 mm Quill travel 100 mm Quill bore taper MT#5 Equipment - Chip conveyor - 3 Jaw-Hydraulic chuck Ø315 mm - Automatic Tool pre-setter - Hydraulic steady rest SMW Autoblock SLU-X-3.2-MS  ...