1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 209
item-No.: 126917010
-
1.300 €
Land-lt LT
Max. log length 7000 mm Max. log thickness ~600 mm Turning motor power 1,1 kW Side spindle motor power 5,5kW Top spindle motor power 7.5 kW
Category: 702
item-No.: 126938327
analogical control, baking-chamber for 1 rack, \r\nfor plates 580 x 780 mm, include water filter\r\ngasburner + water filter are new
Category: 302
item-No.: 126885167
Chill roll extrusion line to the process of polyolefins, working width 2100 mm, film thickness 25-200 my with 3 extruders 2 x 60 mm, 1 x 120 mm, completely fitted out. Film winders are dismantled and not part of the offer. Available Spring 2019. Also films + technology e. kfm. D-73773 Hove Tel. 0049 711 364341, fax 0049 711 363703
Category: 806
item-No.: 126934724
2006
24.438 EU?
Land-pl PL
The machine is a combination of offset with digital printing. The entire process runs automatically - from setting up the plates to exposure, printing and cleaning - in one system. Thermal exposure of the plates takes place directly on the machine cylinders, it does not require chemical processing with a perfect fit. The machine works in anhydrous printing technology.
Category: 1001
item-No.: 126885034
one used cooking cold rolling line for the automatic production of reducing and profiling meshwire for 5 ton spulen wire range: inlet slide 5.5-13.0 mm, finished wire 4.5-12.0 mm max production speed: 8 m/s
Category: 1403
item-No.: 126930313
weight max.: 11,2 t material: hochfest : length in total: ca. 4000 mm This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 1509
item-No.: 126884994
-
1.190 €
-
-Electric pallet truck STILL EGU 20 Lifting capacity 2000 kg integrated battery charger new accident prevention regulations ready, in excellent technical condition and strong battery. Belonging to: Operating instructions Maintenance instructions Spare parts catalog Shipping shipping, Germany approx. 110,-EUR Quotation with delivery on request.
Category: 1403
item-No.: 126930315
weight max.: 13,65 t material: hochfest : length in total: 6000 mm This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 1001
item-No.: 126884990
One used TECNO IMPIANTI single draft block for finished wire from 5.0 to 12.0mm
Category: 107
item-No.: 126930311
sheet width: mm plate thickness: mm stations: --------------------------------------------------: ELECTRICAL SPECIFICATIONS: - total power consumption: 120 kW Last Overhaul: 1991 Tube-Profiling Line with Siemes welding line Tubes from fi 16 to fi 51 mm and thicknes from 0,7 - 1,5 mm. A lot of tools for different tubes (Round, Foursides, Trapez! Spees ca. 60 m / min. This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 1001
item-No.: 126884987
one used SCHLATTER mesh welding line Welding width: 2400 mm Working range: 6.0 to 10.0mm
Category: 104
item-No.: 126930307
saw blade diameter: 600 mm workpiece-spindlehead motor: 0,3 kW grinding wheel diameter: 180 mm grinding wheel size: 180 x 20 x 28 mm weight of the machine ca.: 65 kg dimensions of the machine ca.: 0,62 x 0,64 x 1,01 m Electric 380 Volt: Saw blade sharpening machine, lifting speed 40 or 75 teeth / min, Adjust during the grinding process. Transmission running in the oil bath, Machine stand as tool cabinet, right-left-hand drive. Machine dealer with own stock of 2500 m² and certification of the database Machineseeke ...
Category: 1001
item-No.: 126884985
one used mesh welding line G55 electronic ballast, with 3,500 mm width working range: 5.0 mm to 10.0mm line and cross wires off coil
Category: 103
item-No.: 126930309
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm speeds infinitely variable range 1: 50 - 1000 U/min speeds infinitely variable range 2: 1000 - 4000 U/min taper in main spindle: 40 SK table surface area: 400 x 800 mm quill stroke: 120 mm Required air-pressure: 6 bar drive motor: 4 kW max. table load: 300 kg : weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2100 x 2500 x 2300 mm Electric 380 Volt: digital readout in 3 axis: Heidenhain ND 900 chip pan: Cooling equipment: 800 x 400 mm Fixed knee:  ...
Category: 1001
item-No.: 126884983
used mesh welding line with 2.4m welding width, line and cross wires off coil wire range: 4.0 mm to 8.0mm
Category: 106
item-No.: 126930305
press capacity: max. 400 kN return capacity: max. 200 kN control: Siemens C7 surface area: 560 x 660 mm dayligth: 740 / (max. 940) mm ram stroke: 475 / (max. 975) mm max. Mould Weight: 2.000 kg max. table load: 1.000 kg closing speed: 50 mm/s opening speed: 50 mm/s 0: 200 bar tank capacity: 120 l total power requirement: 11 kVA weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m Spotting-Press REIS - TUS 60-40 - very good condition ! - only ca. 400h Operating-Hours This ad was created ...
Category: 102
item-No.: 126869376
2002
29.000 €
-
CNC turning and milling center MAZAK SQT 200 M stock no. 1105-02454 category CNC turning and milling center brand MAZAK type SQT 200 M year 2002 State second-hand machine control CNC MAZATROL FUSION 640 T dialog storage France country of origin Japan shipping time immediately cargo basis EXW (Incoterms 2000) t slow technical details swing freely 360 mm turning length 1050 mm control MAZATROL FUSION 640 T dialog swing diameter 520 mm rapid traverse in X-and Z direction of 20 m / min feed diameter 250 mm rod diameter ...
Category: 109
item-No.: 126930303
x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm Control: Roders weight of the machine ca.: 5,2 t This ad was created with MODUL MWS - the software solution of LogoTech.
Category: 101
item-No.: 126869374
Control HEIDENHAIN iTNC 530 Traverse path X, Y, Z [mm] 760, 610, 610 Speed [RPM] 12,000 spindle: Technology: belt spindle Speed: 12.000 rpm Tool holder: SK40 General: Clamping surface: 1.000 x 600 mm Table load (max.): 700 kg Rapid traverse in X/Y/Z axis: 43/43/36 m / min Tool Magazine:-teller magazine, 30-fach Equipment / Accessories: Chip management: swarf conveyor Coolant supply: Internal cooling system with 20 bar Tool measurement: Button, m & h 4./5.-Achse: Serial. Hofmann, plate à...
Category: 102
item-No.: 126930300
faceplate diameter: 1300 mm swing diameter: 1600 mm turning height: mm Control: Siemens 850 table load capacity: 6000 kp faceplate turning speed range: max. 430 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control SIEMENS 850 Automatic tool changer ATC 16 Integrated grinding spindle 2 tables (pallet changer) Tool button This ad was created with MODUL MWS - the software solution of LogoTech.
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: